Search results for: 'usb wi-fi adapter'

The smallest Raspberry Pi just got a whole lot cooler. The Raspberry Pi Zero W carries the same form factor and specifications as the original Pi Zero and provides built-in WiFi and Bluetooth 4.1!

The nRF52840 Dongle is a small, low-cost USB dongle that supports Bluetooth 5, Bluetooth mesh, Thread, ZigBee, 802.15.4, ANT and 2.4 GHz proprietary protocols. The...

Zigbee 3.0 USB Dongle Plus–ZBDongle-E is a universal Zigbee USB stick. It is based on EFR32MG21 and pre-flashed with the Zigbee coordinator firmware based...

ESP32-S3 Mini Development Board, Based on ESP32-S3FH4R2 Dual-Core Processor, 240MHz Running Frequency, USB Port Adapter Board Optional...

Create powerful and flexible wireless communication in your projects with ease using the WiFi Module ESP-01. This well-known Maker module is perfect for cost-optimised projects with its compact size and reliable connectivity. Programmed via UART interface and with 1MB of flash, it allows for Micropython to be flashed quickly. Get pre-soldered header, simple WiFi communication, and programmable IO pins all in one package.

You're probably really used to microcontroller boards with USB, but what about a dev board with two? Two is more than one, so that makes it twice as...

This Intel AX210NGW network card takes you into the Wi-Fi 6 era!Adopting the upcoming Wi-Fi 6E standard, the network card provides three-band (2.4GHz, 5GHz, and...

Add Bluetooth capability to your computer super fast with a USB BT 4.0 adapter. This adapter is backwards compatible with v2.1 and earlier, but also supports the...

The Bonelk USB-C to Gigabit Ethernet adapter is the perfect solution to connect a USB-C laptop, smartphone or tablet to an Ethernet network. Built using...

USB TO 2.5G Ethernet Port Converter, High-Speed Networking, Driver-Free, Windows / macOS / Linux / Android Multi-system Support, 2.5G USB Ethernet Adapter...

Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! Adafruit designed Feather to be a new standard for portable...

Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! Adafruit designed Feather to be a new standard for portable...

ESP32-WROOM-DA (the DA is for Dual Antenna) is a powerful Wi-Fi + Bluetooth Classic + Bluetooth LE MCU module, with two complementary PCB antennas in...

Add bluetooth 4.0 to your PC, Mac directly with this USB BLE-Link. It uses the USB package which is compact and compatible with v2.1 and earlier, and also supports the latest v4.0/Bluetooth Low Energy. Now you could use this adapter to receive/transmit data.

This low cost XBee USB Adapter Board comes in partially assembled kit form and provides a cost-effective solution to interfacing a PC or microcontroller to any XBee...

The XBee USB Adapter V2 is an update version from DFRobot. It features an Atmega8U2 programmed as a USB-to-serial converter, the same chip found on the Arduino Uno.

The DFRobot Xbee USB adapter is used for the XBee module configuration parameters to facilitate or to use as a wireless data transmission. It can be easily connected to a PC via mini USB cable. Further, it has XBee-setting support software X-CTU. It can also be used as a USB-TTL adapter.

Connect your Arduino-compatible to the Internet with this WiFi shield that features the FCC-certified ATWINC1500 module from Atmel. This 802.11bgn-capable WiFi module...

One can never have enough socks, or USB ports. Add some more USB and Ethernet capability to your Raspberry Pi Zero or, really, any kind of tablet or computer with...

Bluetooth (Bluetooth) is a kind of wireless network transmission technology originally used to replace the infrared. Compared with infrared technology, Bluetooth can transmit data without targeting, transmission distance is less than 10 meters (infrared transmission distance of a few meters). In the signal amplifier with the help of communication distance and even up to 100 meters. Bluetooth technology is ideal for low power consumption of digital devices to share data with each other, such as mobile phones, handheld computers. Moreover, Bluetooth devices can transmit sound, such as Bluetooth headsets. Widely used Bluetooth specification version 2.0, mature, bandwidth is about 3Mbps very suitable for small file transfer (10MB below pictures, ring tones, e-books, manuscripts, etc.) to facilitate and speed have both.

Feather is the new development board from Adafruit, and like its namesake, it is thin, light, and lets you fly! Adafruit designed Feather to be a new standard for portable...

ESP32-S2-WROVER is a generic WiFi MCU module featuring rich peripherals and high performance. Integrated 42 pins, 4MB flash and 2MB PSRAM, this module has more data...

ESP32-S2- WROOM is a generic WiFi MCU module featuring rich peripherals and high performance. The module has 42 pins and 4MB flash, which can perform stable performance...

Connect your Arduino to the Internet with this fine new FCC-certified WiFi module from Atmel. This 802.11bgn-capable WiFi module is the best new thing for networking...

Using a brand new 8-bit microprocessor from Microchip for the first time on an Arduino board. Explore the possibilities with the onboard IMU (Inertial Measurement Unit). Connect the board to your Wi-Fi network in a secure manner using the new ECC608 crypto chip accelerator.

This is the SparkFun ESP8266 Thing Dev Board – a development board that has been solely design around the ESP8266, with an integrated FTDI USB-to-Serial chip. The ESP8266 is a cost-effective, and very capable WiFi-enabled microcontroller. Like any microcontroller, it can be programmed to blink LEDs, trigger relays, monitor sensors, or automate coffee makers, and with an integrated WiFi controller, the ESP8266 is a one-stop shop for almost any Internet-connected project. To top it all off, the ESP8266 is incredibly easy-to-use: firmware can be developed in Arduino, and uploaded over a simple, serial interface. The ESP8266 Thing Development Board breaks out all of the module’s pins, and the USB-to-serial converter means you don’t need any peripheral components to program the chip. Just plug in a USB cable, download the Arduino board definitions, and start IoT-ing.