Search results for: &#039;test cables&#039;

JST-SH 4-pin Cable with Micro SMT Test Hooks - STEMMA QT / Qwiic

This cable will make it super easy to use our plug-and-play STEMMA QT boards and controllers with chips, breakouts, and other devices that are I2C compatible but don't come with a STEMMA QT socket already on 'em.

$5.70 AUD, inc GST

Small Alligator Clip Test Lead (set of 12)

Connect this to that without soldering using these handy mini alligator clip test leads. 15" cables with alligator clip on each end, color coded. You get 12 pieces...

$12.60 AUD, inc GST

This is an Audio to Alligator Cable, an 8in. long 22 AWG wire with two alligator clips at one end and a 2.5mm mono plug at the other.

Audio Cable to Alligator Clips - 2.5mm

Brand: Sparkfun

$2.40 AUD, inc GST

This is the probe cable for Open workbench Logic sniffer. It has a 1×9 connector and 9 leads with tweezer-style test clips. These are the same tweezer-clips...

Open logic sniffer probe cable (Seeed Studio)

Brand: Seeed Studio

$13.40 AUD, inc GST

Bus Pirate 5 Probe Cable Set

This luxurious accessory will make your Bus Pirate 5 a joy to use. This keyed and locking probe cable made of premium soft and flexible silicone-coated...

$62.40 AUD, inc GST

Multifunction Basic Power Supply Test Line - Banana to Various

This is a really (really!) handy test cable set that has two primary banana plugs that break out into several combinations.

$11.70 AUD, inc GST

Shrouded banana plugs and soft rubber construction for long service life. Includes screw on croc-clips.

Test Lead Set with Croc Clips

Brand: Core Electronics

$21.55 AUD, inc GST

This is a interface cable designed for Bus Pirate V3 which can makes it easier to connect the Bus Pirate to a circuit and get hacking.

Bus Pirate v3 probe Kit (Seeed Studio)

Brand: Seeed Studio

$22.95 AUD, inc GST

This 3 Pin JST-SH Cable is a 30cm cable for solderless Serial Wire Debug (SWD) connections for Raspberry Pi Pico, Pico H, and Pico WH boards. It features...

Raspberry Pi Pico Debug Cable

Brand: Sparkfun

$6.30 AUD, inc GST

Pogo Pin Probe Clip - 2x5 1.27mm Pitch SWD

The Pogo Pin Probe Clip with 2x5 0.05" pitch SWD spacing is a great way to test and connect with pin-point accuracy without soldering! It's sort...

$37.50 AUD, inc GST

TRRS connectors are the audio-style connectors that you see on some phones, MP3 players and development boards. TRRS stands for "Tip, Ring, Ring, Sleeve," which...

TRRS Audio Plug - 3.5mm (Metal)

Brand: Sparkfun

$3.10 AUD, inc GST

Ribbon Cable with Pre-Crimped Terminals 10-Color M-M 6" (15 cm)

These 6" (15 cm) premium jumper wires are made from 26 AWG stranded copper ribbon cable with male crimp pins on both ends. Together with our 0.1" crimp...

$5.30 AUD, inc GST

Pomona Test Lead Holder - For cables up to .21 / 3 AWG diameter - Orange - POM-1508

For untangling insane hairdos Adafruit have moisturizers and combs, but if your desk or work bench is a big ol' mess of cables / wires / test leads then unfortunately...

$45.95 AUD, inc GST

Black Woven USB A to USB C Cable with 66W Watt Display - 1 meter

Everyone has that "good charger" in the house, the one that seems to get your phone from 4% to 100% in record time. But it's a bit of a...

$28.10 AUD, inc GST

Ribbon Cable with Pre-Crimped Terminals 10-Color M-M 60" (150 cm)

These 60" (150 cm) premium jumper wires are made from 22 AWG stranded copper ribbon cable with male crimp pins on both ends. Together with our 0.1" crimp...

$50.75 AUD, inc GST

This 50mm cable is for connecting PiicoDev modules together - it is a 4-wire harness with 1mm pitch SH connectors on each end.

Similar matches

PiicoDev Cable 50mm

Brand: PiicoDev

$0.80 AUD, inc GST

This 200mm cable is for connecting PiicoDev modules together - it is a 4-wire harness with 1mm pitch SH connectors on each end.

PiicoDev Cable 200mm

Brand: PiicoDev

$0.98 AUD, inc GST

PiicoDev Cable Expansion Kit

Brand: PiicoDev

Top up your PiicoDev Starter kit with a range of the most used cables!

$12.76 AUD, inc GST

FNB58 USB Fast Charge Tester

Brand: FNIRSI

Diagnose power delivery issues and verify cable resistance. This high-precision analyser features real-time waveform monitoring and supports modern protocols, including PD3.0 and QC3.0 for comprehensive diagnostics.

$74.60 AUD, inc GST

2-Pin Female JST XH-Style Cable (15cm)

This 6" (15cm) cable has two 26AWG conductors with a 2.5mm-pitch 2-pin female JST XH-style connector. The spacing is very close to 0.1", which means this connector will work with 0.1" male header pins and standard perfboards and solderless breadboards. The other ends of the wires are unterminated; they can be cut to length to match your application. The red and black wires are twisted together to reduce noise.

$3.30 AUD, inc GST

Mini OLED USB C Power Analyzer

Here is a handy measurement data display to help you see in real time the load flowing into your devices as they charge via USB-C. You'll have...

$28.05 AUD, inc GST

2.5mm Pitch 6-pin Cable Matching Pair - JST XH compatible

These solid 2.5mm pitch connector cable pairs are great when you need something that can carry a couple amps of current, easy to connect and disconnect, and is just-about 0.1" pitch compatible.

$3.10 AUD, inc GST

6-Pin Single-Ended Female JST SH-Style Cable 12cm

This 12 cm (4.5") cable has six 28 AWG wires and a 6-pin female JST SH-type connector that works with our Micro Metal Gearmotor Encoders with top-entry...

$3.50 AUD, inc GST

LPM-10A Multifunctional Network Cable Tracker

Brand: FNIRSI

Diagnose network infrastructure and isolate cable faults instantly, even in high-noise environments. This combines advanced anti-interference line tracking, PoE detection, and precise length measurement into one compact diagnostic tool.

$82.95 AUD, inc GST