Search results for: 'teensy audio shield'
Learn
Teensy Audio Adapter Board (Rev D)
Brand: Teensy
This is the Teensy Audio Adapter Board that can be added to a Teensy 4.0 for your next audio project. The shield provides you with an easy-to-use tool to add high...
$16.40 AUD, inc GST
Teensy 4.1
Brand: Teensy
The Teensy 4.1 is newest iteration of the astoundingly popular development platform that features an ARM Cortex-M7 processor at 600MHz, with a NXP iMXRT1062 chip...
$52.95 AUD, inc GST
Mono Enclosed Speaker - 3W 4 Ohm
Brand: Adafruit
Listen up! This 2.8" x 1.2" speaker is a great addition to any audio project where you need 4 ohm impedance and 3W or less of power. Adafruit particularly like this speaker...
$8.95 AUD, inc GST
Teensy 4.1 (Headers)
Brand: Teensy
The Teensy 4.1 is the newest iteration of the astoundingly popular development platform that features an ARM Cortex-M7 processor at 600MHz, with a NXP iMXRT1062...
$57.15 AUD, inc GST
Thin Speaker - 4 Ohm, 2.5W, 28mm
Brand: Sparkfun
Upgrade your sound system with our Thin Speaker! Measuring just 28mm, this 4 Ohm, 2.5W speaker is sleek and powerful. Perfect for any DIY audio project.
$3.75 AUD, inc GST
Mini Oval Speaker - 8 Ohm 1 Watt
Brand: Adafruit
Hear the good news! This wee speaker is a great addition to any audio project where you need 8 ohm impedance and 1W or less of power. Adafruit particularly like this speaker...
$4.80 AUD, inc GST
Teensy 4.0
Brand: Teensy
Teensy 4.0 is the latest Teensy, offering the fastest microcontroller and powerful peripherals in the Teensy 1.4 by 0.7 inch form factor. It features an ARM Cortex-M7...
$40.15 AUD, inc GST
Ethernet Kit for Teensy 4.1
Brand: Teensy
This kit has all the parts needed to connect to the Ethernet port on Teensy 4.1...
$16.10 AUD, inc GST
Mono Enclosed Speaker with Plain Wires - 3W 4 Ohm
Brand: Adafruit
Listen up! This single 2.8" x 1.2" speaker is the perfect addition to any audio project where you need 4 ohm impedance and 3W or less of power. Adafruit particularly like...
$9.10 AUD, inc GST
Teensy Stackable Header Kit (Extended)
Brand: Sparkfun
These headers are made to work with the Teensy 4.1, Teensy 3.6, and Teensy 3.5 development boards. Each set of headers allows for your Teensy to be easily incorporated...
$3.45 AUD, inc GST
Teensy 4.0 (Headers)
Brand: Sparkfun
Teensy 4.0 features an ARM Cortex-M7 processor at 600MHz, with a NXP iMXRT1062 chip, the fastest microcontroller available today. No soldering required!
$43.50 AUD, inc GST
Stereo Enclosed Speaker Set - 3W 4 Ohm
Brand: Adafruit
Listen up! This set of two 2.8" x 1.2" speakers are the perfect addition to any audio project where you need 4 ohm impedance and 3W or less of power. Adafruit particularly...
$18.25 AUD, inc GST
3.5mm (1/8) Stereo Audio Plug Terminal Block
Brand: Adafruit
One truth about working with audio is you always need the cable or adapter you don't have in your toolbox. That's why Adafruit love these terminal-block audio connectors...
$5.55 AUD, inc GST
Audio Jack - 3.5mm TRRS (SMD)
Brand: Sparkfun
This is a 3.5mm TRRS SMD audio jack. TRRS connectors are the audio-style connectors that you see on some phones, MP3 players and development boards. TRRS stands for “tip, ring, ring, sleeve,” which reflects the fact that, unlike a standard stereo connector, this actually has three conductors and a ground. Some devices use the extra conductor for a microphone (like hands-free headsets) or to carry a video signal (like in some MP3/MP4 players).
$2.15 AUD, inc GST
Teensy 4.1 without Ethernet
Brand: Teensy
The Teensy 4.1 features an ARM Cortex-M7 processor at 600MHz, four times larger flash memory than the 4.0, and optional locations for more memory...
$56.95 AUD, inc GST
Mini Oval Speaker with Short Wires - 8 Ohm 1 Watt
Brand: Adafruit
Hear the good news! This wee speaker is a great addition to any audio project where you need 8 ohm impedance and 1W or less of power. Adafruit particularly like this speaker...
$3.70 AUD, inc GST
Mono Enclosed Speaker - 1W 8 Ohm
Brand: Adafruit
Listen up! This 2.8" x 1.2" speaker is a great addition to any audio project where you need 8 ohm impedance and 1W or less of power. We...
$9.15 AUD, inc GST
Thin Plastic Speaker w/Wires - 8 ohm 0.25W
Brand: Adafruit
Listen up! This 1.5" diameter speaker cone is the perfect addition to any audio project where you need an 8O impedance and are using 0.25W of power. The speakers...
$3.80 AUD, inc GST
USB Powered Speakers
Brand: Adafruit
Add some extra boom to your audio project with these powered loudspeakers. Adafruit sampled half a dozen different models to find ones with a good frequency response...
$38.20 AUD, inc GST
Similar matches
DFPlayer - A Mini MP3 Player
Brand: DFRobot
Sing for the moment! The DFPlayer Mini is a small and low cost MP3 module with an simplified output directly to the speaker. The module can be used as a stand alone module with attached battery, speaker and push buttons or used in combination with an Arduino UNO or any other with RX/TX capabilities.
$9.34 AUD, inc GST
Mini USB Microphone
Brand: Adafruit
Hey, listen up! It's the world's smallest USB microphone! OK maybe it's not in the Guinness Record Book, but it is pretty darn small! This plug-and-play Mini USB...
$11.75 AUD, inc GST
Adafruit Audio FX Mini Sound Board - WAV/OGG Trigger 16MB Flash
Brand: Adafruit
Would you like to add audio/sound effects to your next project, without an Arduino+Shield? Or maybe you don't even know how to use microcontrollers, you just want...
$34.55 AUD, inc GST
SparkFun Qwiic Shield for Teensy - Extended
Brand: Sparkfun
The SparkFun Extended Qwiic Shield for Teensy provides you with a quick and easy way to enter into SparkFun's Qwiic ecosystem with your Teensy boards. This shield...
$8.50 AUD, inc GST
SparkFun Qwiic Shield for Teensy
Brand: Sparkfun
The SparkFun Qwiic Shield for Teensy provides you with a quick and easy way to enter into SparkFun's Qwiic ecosystem with your Teensy boards. This shield is sized...
$7.35 AUD, inc GST
SmartMatrix SmartLED Shield for Teensy 4
Brand: Adafruit
So you have a fresh and fancy Teensy 4 and an RGB LED Matrix Panel and you want an easy way to add graphics to your matrix without having to toss aside your Teensy or do too much soldering. Enter the SmartMatrix SmartLED Shield for Teensy 4!
$51.70 AUD, inc GST
SmartMatrix SD Shield v3 - for Teensy 3.2
Brand: Adafruit
So you have a Teensy and a RGB LED Matrix Panel and you want an easy way to add graphics to your matrix without having to toss aside your Teensy or do too much soldering...
$44.30 AUD, inc GST
Teensy 3.x Feather Adapter
Brand: Adafruit Feather
Oh man, is this not the best thing ever? You can now use the awesome Teensy 3 with any and all of our FeatherWings or Feather accessories and even get built-in LiPoly...
$13.15 AUD, inc GST
Pimoroni MINI.MU Speaker
Brand: Pimoroni
This handy little speaker with onboard analogue amplifier works great with micro:bit, and it's sewable and alligator-clippable!
$35.55 AUD, inc GST
Adafruit Audio FX Mini Sound Board - WAV/OGG Trigger - 2MB Flash
Brand: Adafruit
Would you like to add audio/sound effects to your next project, without an Arduino+Shield? Or maybe you don't even know how to use microcontrollers, you just want...
$30.06 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.