Search results for: 'stemma qt temperature sensor'

50 results

PiicoDev Atmospheric Sensor BME280

Brand: PiicoDev

Measure temperature, humidity, and barometric pressure. Use it to build your own weather station or perform experiments.

$23.50 AUD, inc GST

Adafruit Sensirion SHT41 Temperature & Humidity Sensor - STEMMA QT / Qwiic

Brand: Adafruit
Sensirion Temperature/Humidity sensors are some of the finest & highest-accuracy devices you can get. The SHT41 sensor is the fourth generation of I2C...
$10.50 AUD, inc GST

Adafruit Sensirion SHT40 Temperature & Humidity Sensor - STEMMA QT / Qwiic

Brand: Adafruit
Sensirion Temperature/Humidity sensors are some of the finest & highest-accuracy devices you can get. And finally, Adafruit have some that have a true I2C interface for easy reading. The SHT40 sensor is the fourth generation (started at the SHT10 and worked its way up to the top!). The SHT40 has an excellent ±1.8% typical relative humidity accuracy from 25 to 75% and ±0.2 °C typical accuracy from 0 to 75 °C.
$10.80 AUD, inc GST

PiicoDev Precision Temperature Sensor TMP117

Brand: PiicoDev
Accurate to ±0.1°C (across -20°C to +50°C) with no calibration required.
$9.60 AUD, inc GST

Adafruit Sensirion SHT45 Precision Temperature & Humidity Sensor - STEMMA QT / Qwiic

Brand: Adafruit
Sensirion Temperature/Humidity sensors are some of the finest & highest-accuracy devices you can get. And finally, we have some that have a true I2C...
$22.90 AUD, inc GST

Adafruit BME280 I2C or SPI Temperature Humidity Pressure Sensor - STEMMA QT

Brand: Adafruit
Bosch has stepped up their game with their new BME280 sensor, an environmental sensor with temperature, barometric pressure and humidity! This sensor is great for...
$26.30 AUD, inc GST

Adafruit SCD-41 - NDIR CO2 Temperature and Humidity Sensor - STEMMA QT / Qwiic

Brand: Adafruit
Take a deep breath in...now slowly breathe out. Mmm isn't it wonderful? All that air around us, which we bring into our lungs, extracts oxygen from...
$84.30 AUD, inc GST

Adafruit Sensirion SHT45 Precision Temp & Humidity with PTFE - STEMMA QT / Qwiic

Brand: Adafruit
Sensirion Temperature/Humidity sensors are some of the finest & highest-accuracy devices you can get. And finally, we have some that have a true I2C...
$26.20 AUD, inc GST

Adafruit BME688 - Temperature, Humidity, Pressure and Gas Sensor - STEMMA QT

Brand: Adafruit
The long-awaited BME688 from Bosch gives you all the environmental sensing you want in one small package. This little sensor contains temperature, humidity, barometric pressure, and VOC gas sensing capabilities. All over SPI or I2C at a great price!
$34.05 AUD, inc GST

Adafruit BMP581 I2C or SPI Temperature Humidity Pressure Sensor - STEMMA QT

Brand: Adafruit
Bosch has been a leader in barometric pressure sensors, from the BMP085. BMP180, BMP280, BMP388, BMP390... now we've got the next generation, the...
$17.30 AUD, inc GST

Adafruit TMP117 ±0.1°C High Accuracy I2C Temperature Sensor - STEMMA QT / Qwiic

Brand: Adafruit
The TMP117 Precision Temperature Sensor is an I2C temperature sensor that will help you easily add temperature measurement and adjustment to your project. In addition to the obvious support for reading the temperature, the TMP117 can also monitor the temperature and alert you when corrective action needs to be taken.
$22.40 AUD, inc GST

Adafruit EMC2101 I2C PC Fan Controller and Temperature Sensor - STEMMA QT / Qwiic

Brand: Adafruit
Cooling fans...They're everywhere, and they serve the important purpose of keeping things cool, generally electronics. One might rightfully think: "these fans are pretty good at moving air to keep things cool; maybe I can use one of these neat computer fans to keep my widget frosty" followed closely by throwing up one's hands in confusion at the sight of a 3 or even 4-pin connector. OK, power takes two pins but what are these other pins for and how do I use them to convince this fan to keep my things chilly?
$9.90 AUD, inc GST

Adafruit BMP280 I2C or SPI Barometric Pressure & Altitude Sensor - STEMMA QT

Brand: Adafruit
Bosch has stepped up their game with their new BMP280 sensor, an environmental sensor with temperature, barometric pressure that is the next generation upgrade to...
$18.30 AUD, inc GST

Adafruit Sensiron SHT31-D Temperature & Humidity Sensor Breakout

Brand: Adafruit
Sensiron Temperature/Humidity sensors are some of the finest & highest-accuracy devices you can get. And, finally Adafruit have some that have a true I2C interface for...
$27.45 AUD, inc GST

Adafruit SCD-40 - True CO2, Temperature and Humidity Sensor - STEMMA QT / Qwiic

Brand: Adafruit
Take a deep breath in...now slowly breathe out. Mmm isn't it wonderful? All that air around us, which we bring into our lungs, extracts oxygen from...
$85.35 AUD, inc GST

Adafruit AHT20 - Temperature & Humidity Sensor Breakout Board - STEMMA QT / Qwiic

Brand: Adafruit
The AHT20 is a nice but inexpensive temperature and humidity sensor from the same folks that brought Adafruit the DHT22. You can take sensor readings as often as you like, and it uses standard I2C so its super easy to use with any Arduino or Linux/Raspberry Pi board.
$8.85 AUD, inc GST

Adafruit SCD-30 - NDIR CO2 Temperature and Humidity Sensor - STEMMA QT / Qwiic

Brand: Adafruit
Take a deep breath in...now slowly breathe out. Mmm isn't it wonderful? All that air around us, which we bring into our lungs, extracts oxygen from, and then breathe out carbon dioxide. CO2 is essential for life on this planet we call Earth - we and plants take turns using and emitting CO2 in an elegant symbiosis. But it's important to keep that CO2 balanced - you don't want too much around, not good for humans and not good for our planet.
$114.95 AUD, inc GST

Adafruit MCP9601 (MCP96L01) I2C Thermocouple Amplifier - STEMMA QT / Qwiic

Brand: Adafruit
Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference. The Adafruit MCP9601 I2C Thermocouple Breakout (a.k.a MCP96L01) does all that for you and can be easily interfaced with any microcontroller or single-board computer with I2C.
$28.45 AUD, inc GST

Adafruit Sensirion SHTC3 Temperature & Humidity Sensor - STEMMA QT / Qwiic

Brand: Adafruit
Sensirion Temperature/Humidity sensors are some of the finest & highest-accuracy devices you can get. And finally, Adafruit have some that have a true I2C interface for easy reading. The SHTC3 sensor has an excellent ±2% relative humidity and ±0.2 °C accuracy for most uses. Unlike some earlier SHT sensors, this sensor has a true I2C interface on address 0x70.
$13.65 AUD, inc GST

Adafruit MCP9808 High Accuracy I2C Temperature Sensor Breakout - STEMMA QT / Qwiic

Brand: Adafruit
The MCP9808 digital temperature sensor is one of the more accurate/precise we've ever seen, with a typical accuracy of ±0.25°C over the sensor's -40°C to +125°C range and precision of +0.0625°C. They work great with any microcontroller using standard I2C. With three address jumpers on the back, you can connect up to 8 to a single I2C bus without address collisions. Best of all, a wide voltage range makes it usable with 2.7V to 5.5V logic!
$9.25 AUD, inc GST

Adafruit BME680 - Temperature, Humidity, Pressure and Gas Sensor - STEMMA QT

Brand: Adafruit
The long awaited BME680 from Bosch gives you all the environmental sensing you want in one small package. This little sensor contains temperature, humidity, barometric...
$36.20 AUD, inc GST

Adafruit MS8607 Pressure Humidity Temperature PHT Sensor - STEMMA QT / Qwiic

Brand: Adafruit
Because of their many applications, Pressure, Temperature, and Humidity sensors (PHT sensors) are a common offering from semiconductor companies. The MS8607 PHT sensor from TE Connectivity does an admirable job of measuring a wide range of all three environmental conditions. Each and every MS8607 sensor is calibrated at the factory and the calibration constants stored in the sensor itself.
$25.70 AUD, inc GST

SparkFun Micro Temperature Sensor - STTS22H (Qwiic)

Brand: SparkFun
Thanks to its factory calibration the STTS22H offers high-end accuracy performance over the entire operating temperature range, reaching as low as ±0.5°C...
$14.60 AUD, inc GST

Adafruit TMP235 - Plug-and-Play STEMMA Analog Temperature Sensor - TMP235

Brand: Adafruit
For fans of the TMP36, Adafruit now have a very similar analog temperature sensor with a 3-pin JST connector (we call these STEMMA connectors). Unlike many of Adafruits temperature sensors, this one is analog output, not I2C, so its best used by a microcontroller with an analog input, as most microcontrollers do.
$4.55 AUD, inc GST

Adafruit PCT2075 Temperature Sensor - STEMMA QT / Qwiic

Brand: Adafruit
The Adafruit PCT2075 Temperature Sensor is a 'code compatible' drop in replacement for a very common I2C temperature sensor, the LM75. Compared to the LM75, however...
$9.95 AUD, inc GST

Adafruit Si7021 Temperature & Humidity Sensor Breakout Board - STEMMA QT

Brand: Adafruit
It's summer and you're sweating and your hair's all frizzy and all you really want to know is why the weatherman said this morning that today's relative humidity...
$17.25 AUD, inc GST

Adafruit HDC3022 Precision Temperature & Humidity Sensor - STEMMA QT / Qwiic

Brand: Adafruit

This breakout features the highest accuracy & precision that we have see so far! It has the TI HDC302x series chip with typical 0.5% accuracy for the RH sensor (with 0.19% long-term drift) and ±0.1°C typical accuracy for the temperature sensor. All at a very nice price.

$15.60 AUD, inc GST

Adafruit HTU31 Temperature & Humidity Sensor Breakout Board - STEMMA QT / Qwiic

Brand: Adafruit
The HTU31-D is the third generation of temperature-humidity sensors from TE - and a great follow-up to the popular HTU21-D sensor. Like the HTU21, the '31 is great for sensing temperature and humidity, with excellent specifications.
$12.15 AUD, inc GST

Adafruit HTS221 - Temperature & Humidity Sensor Breakout Board - STEMMA QT / Qwiic

Brand: Adafruit
Humidity is the concentration of water vapor (water when it's a gas) in the air. Some places have more and make you feel soggy and hot like you're in a sauna. Other...
$17.25 AUD, inc GST

Pimoroni 3-in-1 Environmental Sensor Stick - Qw/ST Compatible

Brand: Pimoroni
Discover Pimoroni's 3-in-1 Environmental Sensor Stick featuring temperature, pressure, humidity, light, proximity, and motion sensing capabilities with convenient Qw/ST connectivity for seamless integration into your electronics projects.
$36.30 AUD, inc GST

SparkFun Temperature Sensor - STTS22H (Qwiic)

Brand: SparkFun
Thanks to its factory calibration the STTS22H offers high-end accuracy performance over the entire operating temperature range, reaching as low as ±0.5°C...
$11.70 AUD, inc GST

SparkFun Digital Temperature Sensor - TMP102 (Qwiic)

Brand: SparkFun
We all like to know the temperature, right? Well, with the SparkFun TMP102 Digital Temperature Sensor, we've made it just about as easy as it gets. Based on the...
$13.70 AUD, inc GST

SparkFun High Precision Temperature Sensor - TMP117 (Qwiic)

Brand: SparkFun
The SparkFun Qwiic TMP117 breakout is a high precision temperature sensor equipped with an I2C interface. It outputs temperature readings with high precision of...
$27.95 AUD, inc GST

SparkFun Digital Temperature Sensor Breakout - AS6212 (Qwiic)

Brand: SparkFun
The AS6212 digital temperature sensor from AMS provides high-accuracy temperature data combined with excellent power consumption on a small Qwiic board...
$18.30 AUD, inc GST

STEMMA QT / Qwiic JST SH 4-Pin Cable - 50mm Long

Brand: Adafruit
This 4-wire cable is 50mm / 1.9" long and fitted with JST SH female 4-pin connectors on both ends. Compared with the chunkier JST PH these are 1mm pitch instead...
$1.85 AUD, inc GST

WisBlock QWIIC Module RAK13009

Brand: RAKwireless

Connect QWIIC, STEMMA QT and PiicoDev modules to WisBlock in a sensor slot using a compact JST-SH interface for flexible IoT prototyping.

$4.95 AUD, inc GST

Adafruit DS2484 I2C to 1-Wire Bus Adapter Breakout - STEMMA QT / Qwiic JST SH 1mm

Brand: Adafruit
By customer request, this is a DS2484 Stemma QT board that uses a I2C-to-1W controller chip, with ESD protection and support for split supplies. You can...
$14.10 AUD, inc GST

Adafruit LPS33HW Water Resistant Pressure Sensor - STEMMA QT

Brand: Adafruit
Sometimes you need to sense pressure in a damp or caustic environment. And sometimes you need to know the relative changes in pressure as well as the absolute pressure...
$24.90 AUD, inc GST

Adafruit DPS310 Precision Barometric Pressure / Altitude Sensor - STEMMA QT / Qwiic

Brand: Adafruit
How high are you right now? If you had a precision altitude sensor, you would know for sure! The DPS310 sensor from Infineon a high precision barometric sensor...
$13.65 AUD, inc GST

Adafruit SEN54 or SEN55 Adapter Breakout - STEMMA QT / Qwiic

Brand: Adafruit
Now you can quickly integrate the Sensirion SEN54 / SEN55 environmental sensor node into your microcontroller or microcomputer project, with no soldering...
$8.45 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.