Search results for: &#039;smt header&#039;

Low Profile 2x20 SMT header

A must have for your own low-profile PCB designs!

$1.60 AUD, inc GST

Create your own low-profile board designs with these super low-profile headers!

$2.25 AUD, inc GST

SWD 0.05 Pitch Connector - 10 Pin SMT Box Header

This 1.27mm pitch, 2x5 male SMT Box Header is the same one used on Adafruit's SWD Cable Breakout Board. The header alone is great if you want to incorporate this piece...

$3.05 AUD, inc GST

Mini SWD 0.05 Pitch Connector - 10 Pin SMT Box Header

Adafruit have carrying a new 1.27mm pitch 2x5 Mini SWD 0.05" Pitch Connector. It's a tinier, bite-sized version of the Box Header used on Adafruit's SWD Cable Breakout Board. Instead...

$3.45 AUD, inc GST

SMT Socket Header Kit for FeatherWings

These two SMT Socket Headers alone are, well, lonely. But pair them with any of our Feather boards and you're in business!

$5.30 AUD, inc GST

Header - 10-pin Male (SMD, 0.1")

These are standard 0.1" spaced header pins that can be surface mounted for applications where through-hole pins won’t work. The surface mount side of the legs are staggered for stress relief.

$1.90 AUD, inc GST

Header - 6-pin Male (SMD, 0.1")

These are standard 0.1" spaced header pins that can be surface mounted for applications where through-hole pins won’t work. The surface mount side of the legs are staggered for stress relief.

$1.30 AUD, inc GST

Header - 4-pin Male (SMD, 0.1", Right Angle)

This is a SMD 4-pin right angle male header. We use this header on our Graphic LCD Serial Backpack.

$1.25 AUD, inc GST

Male 1x3 Right Angle Header SMD

This is a 3-pin male SMD right angle header...

$0.24 AUD, inc GST

Out of stock

Header - 6-pin Male (SMD, 0.1", Right Angle)

This is a SMD 6 pin right angle male header. We use this header on our LilyPad Main Board.

$2.15 AUD, inc GST

Header - 8-pin Female (SMD, 0.1")

These are standard 0.1" spaced header pins that can be surface mounted for applications where through-hole pins won’t work. The surface mount side of the legs are staggered for stress relief.

$2.70 AUD, inc GST

Header - 6-pin Female (SMD, 0.1", Right Angle)

This is a SMD 6 pin right angle female header. We realized that we have had the male version of this header available for awhile now, but never the female. Now you have the ability to get both!

$2.20 AUD, inc GST

This is a 4-pin, 2.0mm pitch, Grove Female Header pack with 20pcs, which is suitable to solder onto a module and enable it to connect with other...

Grove Female Header - SMD-4P-2.0mm-20Pcs

Brand: Seeed Studio

$3.10 AUD, inc GST

Adafruit Reversible USB Type A Plug Connector Breakout

Coming soon! Sign up to be notified when these are in stockQuantum superposition is a physics concept that light and matter can be both particle and wave...

$4.70 AUD, inc GST

Similar matches

Ultimate Header Pack

A pack of the most commonly used headers!

$11.05 AUD, inc GST

The centre of your next project. Mount your RPi Pico with headers, or solder directly to the protoboard.

Makerverse Protoboard for Raspberry Pi Pico

Brand: Makerverse

$5.15 AUD, inc GST

2.54mm 1x40-Pin Right Male Header

A classic 0.1" | 2.54mm pitch 40-pin header row, with right-angle mounting for the edge of your board.

$0.41 AUD, inc GST

Female Header 2.54mm (2x20)

Perfect for prototyping, this straight female header is a commonly used header type so grab a few and put your ideas to the test!

$0.82 AUD, inc GST

Header Kit for Raspberry Pi Pico

Configure your stack of Pico HATs however you want with this header kit!

$2.80 AUD, inc GST

2x20 Socket Riser Header for Raspberry Pi HATs and Bonnets

Give yourself a lift with this 2x20 female socket header that has slightly longer than usual pins. You can plug this into your Raspberry Pi GPIO port and then plug...

$3.90 AUD, inc GST

Header - 40-pin Male (Long Centered, PTH, 0.1")

This is a row of 40 break away headers spaced 0.1" apart with long pins on both sides. This header is especially useful when you need to connect a PCB to a solderless breadboard. Each header can be broken apart to your preference to fit custom PCBs or general custom headers.

$2.70 AUD, inc GST

Teensy Stackable Header Kit (Extended)

These headers are made to work with the Teensy 4.1, Teensy 3.6, and Teensy 3.5 development boards. Each set of headers allows for your Teensy to be easily incorporated...

$3.45 AUD, inc GST

Slim Header -Male 1x40

If stacking your boards too high is an issue check out this range of low-profile headers!

$0.73 AUD, inc GST

Slim Header -Female 1x40

If stacking your boards too high is an issue check out this range of low-profile headers!

$1.40 AUD, inc GST

2.54mm 1x4-Pin Straight Female Header

Four header pins in a block for a permanent prototyping connection to your breakouts and PCBs.

$0.16 AUD, inc GST

2.54mm 1x3-Pin Straight Female Header

Got some 2.54mm | 0.1" pitch through holes on your PCB you need to connect to? Here's some headers you can use.

$0.11 AUD, inc GST

2.54mm 1x40-Pin Right Female Header

This long row of headers has you covered when you have an "unconventional" free 40-pins on the edge of your PCB to interface or prototype with.

$1.05 AUD, inc GST

Stacking Header for Pi A+/B+/Pi 2/Pi 3 - 2x20 Extra Tall Header

Stack multiple plates, breakouts etc onto your Raspberry Pi Model B+ with this custom-made extra-tall and extra-long 2x20 female header. The female header part has...

$6.30 AUD, inc GST

2.54mm 1x6-Pin Straight Female Header

Do you have a headerless breakout module, custom PCB, or other 2.54mm-pitch connection you need a reliable set of headers for? If so, then these are the kind of headers you're after.

$0.16 AUD, inc GST

Slim Header -Female 1x20

If stacking your boards too high is an issue check out this range of low-profile headers!

$0.72 AUD, inc GST

2.54mm 1x6-Pin Right Female Header

For six pins you need to interface to at a right angle, these headers would be an easy option.

$0.26 AUD, inc GST

Slim Header -Male 1x20

If stacking your boards too high is an issue check out this range of low-profile headers!

$0.42 AUD, inc GST

2.54mm 1x8-Pin Right Female Header

Got 8-pins on the edge of your PCB that you need to interface off a right right-angle? If so, this is the header for you.

$0.37 AUD, inc GST

2.54mm 1x20-Pin Right Female Header

If you've got exactly twenty positions for pins on the edge of your board you want some female headers on to interface with, these headers have you covered.

$0.74 AUD, inc GST