Search results for: 'single pole double throw'
Rocker Switch: 3-Pin, SPDT, 10A
Brand: Pololu
This single-pole, double-throw (SPDT) rocker switch makes a great on/off power switch. It is rated for 10 A at 125 VAC and 6 A at 250 VAC.
$2.85 AUD, inc GST
Mini Panel Mount SPDT Toggle Switch
Brand: Adafruit
This or that, one or the other, perhaps or perhaps not! So hard to make decisions these days without feeling like you're just going back and forth constantly. Deciding...
$2.10 AUD, inc GST
Breadboard-friendly SPDT Slide Switch
Brand: Adafruit
These nice switches are perfect for use with breadboard and perfboard projects. They have 0.1" spacing and snap in nicely into a solderless breadboard. They're easy...
$1.90 AUD, inc GST
Mini Slide Switch: 3-Pin, SPDT, 0.3A (3-Pack)
Brand: Pololu
These small single-pole, double-throw (SPDT) slide switches are rated for 300 mA at 50 VDC and make great on/off power switches for low power electronics. They can also be used as a convenient way to choose between two analog or digital input signals. The three pins have a 0.1″ spacing that works with standard solderless breadboards. These switches are sold in packs of 3.
$3.95 AUD, inc GST
SPDT Mini Power Switch (Breadboard-friendly)
Brand: Sparkfun
Simple SPDT slide switch. Rated at 30V/200mA. The pins have .1" spacing - fits great into a breadboard! Use it as a power switch or general control switch.
$2.95 AUD, inc GST
Snap-Action Switch with 16.7mm Lever: 3-Pin, SPDT, 5A
Brand: Pololu
This single-pole, double-throw (SPDT) momentary switch can be used as a general-purpose micro switch or tactile bump sensor for your robot. The switch body dimension is 20.0 x 6.4 x 10.2 mm, and the lever arm is 16.7 mm long.
$3.75 AUD, inc GST
Mini Microswitch - SPDT (Roller Lever)
Brand: Sparkfun
Although small in size, KW4-Z5F roller microswitches are rated for controlling electrical loads ranging from logic level (computer based circuits) to power duty...
$3.20 AUD, inc GST
Rocker Switch - On/Off/On (Round)
Brand: Sparkfun
This little round on/off/on toggle switch is rated up to 10A at 125VAC and can be panel mounted in a 20mm diameter hole.
$2.40 AUD, inc GST
MOSWITCH - 9A/28V SPDT MOSFET Switch
Brand: Core Electronics
The MOSWITCH is a Single Pole Double Throw (SPDT) switch implemented with MOSFETs, with a very small footprint (2cm x 2cm). The diagram below shows the...
$11.85 AUD, inc GST
Solarbotics Useless Box Kit
Brand: Solarbotics
You build it, you turn it on, and ...it has other ideas. A finger extends, and turns itself off just as quickly as you turn it on. Weird and wonderful, it's a physical description of many aspects of life (how's that for the beginning of an artsy interpretation?).
$50.30 AUD, inc GST
Snap-Action Switch with 16.3mm Roller Lever: 3-Pin, SPDT, 5A
Brand: Pololu
This single-pole, double-throw (SPDT) momentary switch can be used as a general-purpose micro switch or tactile bump sensor for your robot. The switch body dimension is 20.0 x 6.4 x 10.2 mm, and the 16.3mm lever arm is has a roller at the tip.
$4.20 AUD, inc GST
Mini Snap-Action Switch with 13.5mm Lever: 3-Pin, SPDT, 1A
Brand: Pololu
This miniature single-pole, double-throw (SPDT) momentary switch can be used as a general-purpose micro switch or as a small tactile bump sensor for your robot. The switch body dimension is 12.8 × 6.0 × 6.5 mm, and the lever arm is 13.5 mm long.
$2.30 AUD, inc GST
Snap-Action Switch with 50mm Lever: 3-Pin, SPDT, 5A
Brand: Pololu
This single-pole, double-throw (SPDT) momentary switch can be used as a general-purpose micro switch, but the long lever arm makes it especially useful as a tactile bump sensor for your robot (e.g whiskers or antennae). The switch body dimension is 20.0 x 6.4 x 10.2 mm, and the lever arm is 50 mm long.
$4.55 AUD, inc GST
Mini Microswitch - SPDT (Offset Lever, 2-Pack)
Brand: Sparkfun
This is a 3-terminal microswitch two pack, each equipped with a 20mm offset lever actuator. These switches have a great ‘clicky’ sound to them with a nice tactile feel and are perfect when used for a slider, 3D printer, or robot project. Each microswitch is rated for 5A at 250VAC.
$9.95 AUD, inc GST
Snap-Action Switch with 18.5mm Bump Lever: 3-Pin, SPDT, 5A
Brand: Pololu
This single-pole, double-throw (SPDT) momentary switch can be used as a general-purpose micro switch or tactile bump sensor for your robot. The switch body dimension is 20.0 x 6.4 x 10.2 mm, and the 15.6mm lever arm has a semicircular bump at the tip that simulates a roller.
$3.95 AUD, inc GST
Pololu Basic SPDT Relay Carrier with 12VDC Relay (Assembled)
Brand: Pololu
The Pololu basic relay carrier modules allow simple control of a single-pole, double-throw (SPDT) switch from low-voltage, low-current control signals. This item includes the basic carrier PCB with a soldered-in 12 V relay, 5.0 mm terminal blocks for the switch connections, and straight 0.1" male header for the control connections. The included power relay is an Omron G5LE-14-DC12 and is rated for up to 10 A under most conditions.
$14.70 AUD, inc GST
Mini Panel Mount DPDT Toggle Switch
Brand: Adafruit
This or that, one or the other, perhaps or perhaps not! So hard to make decisions these days without feeling like you're just going back and forth constantly. Deciding...
$2.85 AUD, inc GST
Pololu Basic 2-Channel SPDT Relay Carrier with 5VDC Relays (Assembled)
Brand: Pololu
The Pololu basic 2-channel relay carrier modules allow simple, independent control of two single-pole, double-throw (SPDT) switches from low-voltage, low-current control signals. This item includes the basic carrier PCB with two soldered-in 5 V relays, 5.0 mm terminal blocks for the switch connections, and straight 0.1" male header for the control connections. The included power relays are Omron G5LE-14-DC5 and are rated for up to 10 A under most conditions.
$27.40 AUD, inc GST
Pololu Basic SPDT Relay Carrier with 5VDC Relay (Assembled)
Brand: Pololu
The Pololu basic relay carrier modules allow simple control of a single-pole, double-throw (SPDT) switch from low-voltage, low-current control signals. This item includes the basic carrier PCB with a soldered-in 5 V relay, 5.0 mm terminal blocks for the switch connections, and straight 0.1" male header for the control connections. The included power relay is an Omron G5LE-14-DC5 and is rated for up to 10 A under most conditions.
$14.40 AUD, inc GST
Relay SPDT Sealed
Brand: Sparkfun
These are high quality Single Pole - Double Throw (SPDT) sealed relays. Use them to switch high voltage, and/or high current devices.
$5.50 AUD, inc GST
Pololu Basic 2-Channel SPDT Relay Carrier with 12VDC Relays (Assembled)
Brand: Pololu
The Pololu basic 2-channel relay carrier modules allow simple, independent control of two single-pole, double-throw (SPDT) switches from low-voltage, low-current control signals. This item includes the basic carrier PCB with two soldered-in 12 V relays, 5.0 mm terminal blocks for the switch connections, and straight 0.1" male header for the control connections. The included power relays are Omron G5LE-14-DC12 and are rated for up to 10 A under most conditions.
$23.90 AUD, inc GST
Pololu Basic SPDT Relay Carrier with 12VDC Relay (Partial Kit)
Brand: Pololu
The Pololu basic relay carrier modules allow simple control of a single-pole, double-throw (SPDT) switch from low-voltage, low-current control signals. This item includes the basic carrier PCB along with an Omron G5LE-14-DC12 12 V relay, 5.0 mm terminal blocks, and 0.1" male headers in straight and right-angle versions. Surface-mount components are pre-assembled on the PCB, but the through-hole components are not installed. The included power relay is rated for up to 10 A under most conditions.
$13.20 AUD, inc GST
Pololu Basic SPDT Relay Carrier with 5VDC Relay (Partial Kit)
Brand: Pololu
The Pololu basic relay carrier modules allow simple control of a single-pole, double-throw (SPDT) switch from low-voltage, low-current control signals. This item includes the basic carrier PCB along with an Omron G5LE-14-DC5 5 V relay, 5.0 mm terminal blocks, and 0.1" male headers in straight and right-angle versions. Surface-mount components are pre-assembled on the PCB, but the through-hole components are not installed. The included power relay is rated for up to 10 A under most conditions.
$13.05 AUD, inc GST
Pololu RC Switch with Relay (Assembled)
Brand: Pololu
This RC relay enables easy control of large, electrically isolated loads in radio control (RC) systems. The activation threshold and direction are configurable, and a safe-start feature reduces the likelihood of unexpected activation. This assembled version ships with the 5V relay, terminal block, and straight male header pins soldered in, so it can be integrated into hobby RC systems without the need for additional soldering. The included power relay is an Omron G5LE-14-DC5 and is rated for up to 10 A under most conditions.
$30.15 AUD, inc GST
Step Switch with LED - Three Pack of Red Plastic with Red LED - PB86-A1
Brand: Adafruit
These hinged momentary step switches are evocative of the 16-step sequencer keys on TR-808 sythesizers. Also sometimes used on A/V equipment, they're...
$7.95 AUD, inc GST
SparkFun Inventor's Kit Refill Pack
Brand: Sparkfun
If you use the SparkFun Inventor's Kit in a classroom or workshop setting, you know that when a bunch of people get their hands on the same kit, things get lost/broken
$64.15 AUD, inc GST
Pololu Basic 2-Channel SPDT Relay Carrier with 5VDC Relays (Partial Kit)
Brand: Pololu
The Pololu basic 2-channel relay carrier modules allow simple, independent control of two single-pole, double-throw (SPDT) switches from low-voltage, low-current control signals. This item includes the basic carrier PCB along with two Omron G5LE-14-DC5 5 V relays, 5.0 mm terminal blocks, and 0.1" male headers in straight and right-angle versions. Surface-mount components are pre-assembled on the PCB, but the through-hole components are not installed. The included power relays are rated for up to 10 A under most conditions.
$25.45 AUD, inc GST
Similar matches
Rocker Switch - SPST (round)
Brand: Core Electronics
This little round on/off toggle switch is rated up to 6A at 125VAC and can be panel mounted in a 20mm diameter hole. It’ll also look pretty slick in your project.
$0.57 AUD, inc GST
Breadboard slide switch
Brand: Core Electronics
Introducing our Breadboard Compatible Slide Switch - a compact yet durable switch perfect for prototyping and DIY projects. Easily mountable on a breadboard for hassle-free testing and experimentation. Get yours now.
$0.12 AUD, inc GST
Toggle Switch
Brand: Sparkfun
This is a heavy duty SPST toggle switch - your basic on/off toggle. Rated for 2A at 250V or 4A at 125V. Includes a face plate and two threaded nuts for mounting. Works great with our missile switch cover.
$4.40 AUD, inc GST
Ultra Mini Rocker Switch - SPST
Snap in fitting. SPST 250VAC 6A. Black body, black actuator.
$2.95 AUD, inc GST
3A SPST Switch
Brand: Core Electronics
Easily control the power to your DIY projects with our 3A SPST switch. This versatile switch is perfect for any small project, with a single pole, single throw design and a 3A rating to handle most maker projects.
$0.38 AUD, inc GST
Rocker Switch - (SPST, round, on off)
Brand: Core Electronics
This little round on/off toggle switch is rated up to 10A at 125VAC and can be panel mounted in a 20mm diameter hole. It’ll also look pretty slick in your project.
$0.83 AUD, inc GST
Toggle Switch and Cover - Illuminated (Red)
Brand: Sparkfun
This simple on-off switch is rated for 20A at 12V but who cares about all that, it looks way awesome. These toggle switches come with those missile switch covers that make your project look like something out of a spy movie. They’re also a great safety feature to ensure that you don’t accidentally fire the missiles (or whatever it is your switch does). As if you needed any more convincing, they’re also illuminated with a small LED in the end of the switch. These can be panel mounted into a 12mm hole.
$9.25 AUD, inc GST
Rocker Switch - SPST (right-angle)
Brand: Sparkfun
Your project will probably need an on/off switch. If you plan to house the project in an enclosure, we found this great rocker switch to help you out. RoHS and UL approved.
$2.25 AUD, inc GST
Sub-miniature DPDT Panel Mount Switch
Brand: Core Electronics
This is a mountable DPDT slide switch — great for use as a general control switch. The pins are spaced 19mm apart so it's not suitable for breadboard use.
$1.75 AUD, inc GST
DIP Switch - 8 Position
Brand: Sparkfun
DIP switch with 8 individual switch positions. The pins have .1" spacing - fits great into a breadboard but be careful as the connections can be quite loose.
$3.70 AUD, inc GST
Surface Mount Right Angle Switch
Brand: Sparkfun
A simple SMD slide switch. Perfect for when you need access to a setting or a power switch from the edge of a PCB buried deep within a project.
$1.90 AUD, inc GST
Stomp Switch
Brand: Sparkfun
These are the sturdy little stomp switches that you find on guitar effects pedals. They’re 3PDT (three-pole, double-throw) type switches. Thhese switches allow you...
$9.15 AUD, inc GST
DPDT Cen Off Mom/Lock Solder Tail Mini Toggle Switch
Brand: Core Electronics
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference to the more expensive makes. Salecom offers excellent value for money. Typically Salecom switches are reliable for up to 50,000 switching operations at full ratings.
$5.55 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.