Search results for: 'servo connector'

This is a 300mm servo extension cable. This comes in very handy when your servo is further away from the controller than the wire on the servo allows.

This is a 600mm servo extension cable. This comes in very handy when your servo is further away from the controller than the wire on the servo allows.

Extend your servo's reach with this 1m Servo Extension Cable. Featuring male and female JR Style connectors, it's perfect for robotics, RC vehicles, and other DIY/Maker projects. Enjoy seamless connections and added flexibility in cable management – a must-have for any enthusiast's toolkit.

This is a 150mm servo extension cable. This comes in very handy when your servo is further away from the controller than the wire on the servo allows.

This 24-inch (600-mm), twisted cable can be used to extend the leads of many common RC hobby servos. It has 22-AWG wires, and both the male and female cable ends are compatible with both JR- and Futaba-style connectors, allowing it to work in either system or as an adapter between systems. The cable’s conductors each consist of 60 strands, making it much more flexible than standard servo cables, and the wires are twisted to reduce electromagnetic interference (EMI).

Reverse your servo’s rotation with the Servo Travel Reverser! This 300mm length TJC8 extension plugs inline with your servo wiring to...

This 1200mm length servo extension will allow you to extend the distance between your servo and servo controller. In servo applications,.....

This 12-inch (300-mm), flat Y-cable is typically used to connect two servos to a single servo port . It has 22-AWG wires terminated on one end by a “JR”-style female connector and on the other by two Futaba J male connectors, allowing it to work in either system or as an adapter between systems. The split occurs close to the cable’s JR input, so the two male ends can be separated by up to approximately 18" (450 mm). The cable’s conductors each consist of 60 strands, making it more flexible than standard servo cables.

This servo cable has a shrouded male servo connector on one end, and 3x breadboard hookup pigtails at the other end...

This universal connector for your M5 Stack, connects to GROVE, commonly used of this part is for the RGB LED strip extension.

This 500 mm Y-cable is typically used to connect two servos to a single servo port on an RC receiver or servo controller.

Sometimes servo control signals can weaken over a long distance of wire or by being shared by multiple servos. A weak signal causes servos.....

This is a servo adapter cable that allows you to hookup your servo directly to alligator clip connections...

This 12-inch (300-mm), flat cable can be used to extend the leads of many common RC hobby servos. It has 22-AWG wires, and both the male and female cable ends are compatible with both JR- and Futaba-style connectors, allowing it to work in either system or as an adapter between systems. The cable’s conductors each consist of 60 strands, making it more flexible than standard servo cables.

This 24-inch (600-mm), flat cable has 22-AWG wires and female “JR”-style connectors on both ends, the same kind of connector commonly found on RC hobby servos. It can be used to make connections between devices with 0.1" 3-pin male headers, such as between RC servo controllers or RC receivers and motor controllers with an RC interface. It can also be a convenient way to connect various 3-pin sensors to a robot controller.

These servo connector (aka TJC8) clips help keep servo connections together and aid in tidying up wires for a clean and professional.....

This 12-inch (300-mm), flat cable has 22-AWG wires and female “JR”-style connectors on both ends, the same kind of connector commonly found on RC hobby servos. It can be used to make connections between devices with 0.1" 3-pin male headers, such as between RC servo controllers or RC receivers and motor controllers with an RC interface. It can also be a convenient way to connect various 3-pin sensors to a robot controller. The cable’s conductors each consist of 60 strands, making it more flexible than standard servo cables.

This 12-inch (300-mm), twisted cable has 22-AWG wires and female “JR”-style connectors on both ends, the same kind of connector commonly found on RC hobby servos. It can be used to make connections between devices with 0.1" 3-pin male headers, such as between RC servo controllers or RC receivers and motor controllers with an RC interface. It can also be a convenient way to connect various 3-pin sensors to a robot controller. The cable’s conductors each consist of 60 strands, making it much more flexible than standard servo cables, and the wires are twisted to reduce electromagnetic interference (EMI).

This 150mm length servo extension will allow you to extend the distance between your servo and servo controller. In servo applications,...

This 600mm length servo extension will allow you to extend the distance between your servo and servo controller. In servo applications,...