Search results for: 'raspberry pi general-purpose input/output breakout'

50 results

40-pin Raspberry Pi GPIO Breakout

Brand: Core Electronics
If you're after a quick and easy to way to connect external circuitry up to your Raspberry Pi, then look no further! This breakout board has a form factor perfect for connecting to breadboards using the included 40-pin ribbon cable.
$5.65 AUD, inc GST

52Pi Mini Screw Terminal GPIO Breakout Board for Raspberry Pi

Brand: 52Pi

Clamp wires straight onto every Raspberry Pi GPIO pin with clearly labelled screw terminals: no soldering, no loose jumpers.

$18.55 AUD, inc GST

Assembled Pi T-Cobbler Plus - GPIO Breakout

Brand: Adafruit
This is the assembled version of the Pi T-Cobbler Plus. This cobbler will break out your Pi's GPIO pins, with a labelled circuit board making prototyping easy like it should be.
$17.10 AUD, inc GST

Pi-EzConnect Terminal Block Breakout HAT

Brand: Adafruit
With the Pi-EzConnect you can connect all sorts of electronics to a single Raspberry Pi with no soldering or breadboarding! This HAT has screw-terminals for each...
$50.75 AUD, inc GST

Prototyping Kit for Raspberry Pi

Brand: Core Electronics
Everything you need to start prototyping and experimenting with the Raspberry PI's GPIO headers and physical computing. It even includes a handy case to keep your project in!
$17.40 AUD, inc GST

Breakout Pi Zero

Brand: AB Electronics
The Breakout Pi Zero is a useful and versatile prototyping expansion board for the Raspberry Pi Zero computer.
$9.60 AUD, inc GST

GPIO Multi-Function Expansion Board (Pi 4B/3B/3B+)

Brand: Core Electronics

This handy HAT sits right on the top of your Pi, and will break out the 40-Pin header on your Raspberry Pi 3B, 3B+ and 4B into 3 banks of pins, and adjacent pins to these connect to screwless spring terminals on the outside of the board.

$6.10 AUD, inc GST

Breakout Pi Plus

Brand: AB Electronics
The Breakout Pi Plus is a useful and versatile prototyping expansion board for the Raspberry Pi.
$9.95 AUD, inc GST

IO Expansion HAT for Raspberry Pi 4B/3B+

Brand: DFRobot
This IO Expansion HAT from DFRobot is the perfect companion for your Raspberry Pi 4B/3B+! It leads out all of the IO ports on Raspberry Pi including digital port...
$15.67 AUD, inc GST

Assembled Pi Cobbler Plus - Breakout Cable - for Pi B+/A+/Pi 2/Pi 3

Brand: Adafruit
The Raspberry Pi B+/Pi 2/ Pi 3 has landed on the Maker World like a 40-GPIO pinned, quad-USB ported, credit card sized bomb of DIY joy. And while you can use most...
$15.15 AUD, inc GST

Adafruit Pi T-Cobbler Plus Kit Breakout for 2x20 Raspberry Pi - RasPi A+, B+, Pi 2, Pi 3, Zero

Brand: Adafruit
The Raspberry Pi A+/B+/Pi 2/Pi 3/Zero has landed on the Maker World like a 40-GPIO pinned, quad-USB ported, credit card sized bomb of DIY joy. And while you can...
$16.15 AUD, inc GST

Adafruit Perma-Proto 40-Pin Raspberry Pi Half-Size PCB Kit - with 2x20 Header

Brand: Adafruit
We put a PermaProto half-sized proto board in a blender with a Pi Cobbler and out emerged this very tasty confection - the 40-Pin PermaProto for Pi! It has the Cobbler...
$12.10 AUD, inc GST

Adafruit Perma-Proto 40-Pin Raspberry Pi Breadboard PCB Kit - with 2x20 Header

Brand: Adafruit
We put a PermaProto full-sized proto board in a blender with a Pi Cobbler and out emerged this very tasty confection - the 40-Pin PermaProto for Pi! It has the Cobbler...
$16.10 AUD, inc GST

Maker Hat Base - HAT & GPIO Extension for Raspberry Pi 400

Brand: Cytron
Maker Hat Base extends out all the GPIOs of the Raspberry Pi 400 in a quick and simple way - be it using your favorite HAT or building your own simple...
$38.50 AUD, inc GST

Raspberry Pi Extra-Long Stacking Header (2x20 pins)

Brand: Core Electronics

Need another HAT on top of the stack? Grab one of these stacking headers!

$1.95 AUD, inc GST

Raspberry Pi 400 Complete Kit

Brand: Raspberry Pi
This is a ready-to-go kit that includes the Raspberry Pi 400 Computer along with all the accessories you'll need to get started with projects.
$142.01 AUD, inc GST

Raspberry Pi Dual-Access GPIO Extension Board

Brand: The Pi Hut
Enhance your Raspberry Pi projects with this dual-access GPIO extension board, featuring both vertical and horizontal pin headers for flexible GPIO access on all 40-pin Raspberry Pi models including Pi 5, 4, and Zero.
$11.95 AUD, inc GST

Raspberry Pi Compute Module 4 IO Board

Brand: Raspberry Pi
Exposing every interface from Raspberry Pi Compute Module 4, the Compute Module 4 IO Board provides a development platform and reference base-board design for Raspberry Pi's most powerful Compute Module yet.
$87.10 AUD, inc GST

GPIO Stacking Header for Pi A+/B+/Pi 2/Pi 3 - Extra-long 2x20 Pins

Brand: Adafruit
Connect your own PCB to a Raspberry Pi B+ and stack on top with this normal-height female header with extra long pins. The female header part is about 8.5mm tall...
$5.65 AUD, inc GST

Adafruit Pi Stemma QT Breakout for Raspberry Pi and Compatibles

Brand: Adafruit
The Adafruit Pi Stemma is a small, easily removable breakout that easily adds a 4-pin JST SH pin (Stemma QT or Qwiic) connector to your Raspberry Pi. The...
$4.55 AUD, inc GST

Pimoroni OnOff SHIM for Raspberry Pi

Brand: Pimoroni
Add a tiny yet convenient power switch to your Pi with Pimoroni's On-Off SHIM! Pimoroni's SHIMs (Shove Hardware in the Middle) are a new range of boards designed...
$19.35 AUD, inc GST

Adafruit AW9523 GPIO Expander and LED Driver Breakout - STEMMA QT / Qwiic

Brand: Adafruit
Expand your project possibilities, with the Adafruit AW9523 GPIO Expander and LED Driver Breakout - a cute and powerful I2C expander with a lot of tricks up it's sleeve.
$9.70 AUD, inc GST

Raspberry Pi Model B - GPIO Shrouded Header (2x20)

Brand: SparkFun
This 2x20 shrouded header has the same number and spacing of pins as the Raspberry Pi B+ so you can easily connect via ribbon cable to the low-level peripherals and get hacking! This through-hole header has 40 0.1"-spaced pins and is keyed for polarity.
$1.80 AUD, inc GST

GPIO Header for Raspberry Pi - 2x20 Female Header

Brand: Adafruit
Connect your own PCB to a Raspberry Pi with this normal-height female header. The female header part is about 8.5mm tall, good for small HATs that do not to clear...
$2.95 AUD, inc GST

Raspberry Pi Hat Hardware Kit

Brand: SparkFun
Effortlessly mount any standard Pi HAT onto your Raspberry Pi 3, 4, or 5, even with a bulky cooling fan or heat sink installed. This harware kit provides...
$18.30 AUD, inc GST

GPIO Header for RaspberryPi A+/B+/Pi 2/Pi 3 - Tall 2x20 Female Header

Brand: Adafruit
Connect your own PCB to a Raspberry Pi B+ with this extra-tall female header. The female header part has extra spaces to make it 16.5mm tall: when placed on your...
$6.25 AUD, inc GST

SparkFun 16 Output I/O Expander Breakout - SX1509

Brand: SparkFun

The SX1509 Breakout is a 16-channel GPIO expander that adds fully configurable digital I/O to your microcontroller using just two I2C wires. It also handles PWM for LED dimming, can blink or breathe pins, and has a built-in keypad engine for up to 64 buttons.

$13.35 AUD, inc GST

GPIO Header for Raspberry Pi HAT - 2x20 Short Female Header

Brand: Adafruit
This 'shorty' 2x20 header is great for a slim connection to your Raspberry Pi model A+ or B+, it's basically the through-hole version of the SMT GPIO Header for...
$4.05 AUD, inc GST

Adafruit PCF8575 I2C 16 GPIO Expander Breakout - STEMMA QT / Qwiic

Brand: Adafruit
Expand your project possibilities, with the Adafruit PCF8575 GPIO Expander Breakout - an affordable 16 channel I2C expander.GPIO expanders work like this:...
$10.70 AUD, inc GST

Breakout Garden for Raspberry Pi 400 (I2C + SPI)

Brand: Pimoroni
Now at right angles! An easy, solderless, swappable way to use breakouts with your Raspberry Pi 400 - just pop up to three Breakout Garden breakouts (2 x I2C, 1 x SPI) into the slots and get coding and creating!
$24.15 AUD, inc GST

Pimoroni IO Expander Breakout

Brand: Pimoroni
Add oodles of extra analog-friendly input and output pins to your Raspberry Pi project!
$16.45 AUD, inc GST

Adafruit GPIO Reference Card for Raspberry Pi Model B+/Pi 2/Pi 3

Brand: Adafruit
This board makes connecting wires to the Raspberry Pi GPIO incredibly easy. It's a reference board that makes it really easy to see if you're connecting your wires...
$4.60 AUD, inc GST

IDC Breakout Helper - 2x20 (40 pin)

Brand: Adafruit
The "poor woman's" Raspberry Pi A+ / B+ / Pi 2 cobbler! This combo of 2x20 pin (0.1 spaced) header and socket is for Adafruit's popular GPIO Ribbon Cable for Raspberry...
$5.20 AUD, inc GST

GPIO Header for Raspberry Pi - Extra tall 2x13 Female Header

Brand: Adafruit
Connect your own PCB to a Raspberry Pi with this extra-tall female header. The female header part has extra spaces to make it 13.6mm tall: when placed on your Pi...
$3.40 AUD, inc GST

Pimoroni Breakout Garden Mini (I2C + SPI)

Brand: Pimoroni
Now with SPI! The easiest way to use breakouts with your Raspberry Pi. There's no soldering required, just pop up to three Pimoroni breakouts (2xI2C, 1xSPI) into the slots on Breakout Garden Mini and get started coding and creating.
$24.50 AUD, inc GST

SparkFun Qwiic Starter Kit for Raspberry Pi V2

Brand: SparkFun
The SparkFun Qwiic Kit for Raspberry Pi includes a shield with headers, three Qwiic-enabled breakout boards, and four cables to help make I2C easier!...
$119.95 AUD, inc GST
Similar matches

Adafruit MCP23017 I2C GPIO Expander Breakout - STEMMA QT / Qwiic

Brand: Adafruit
We’ve gotten a lot of requests for a MCP23017 breakout and we’ve always sorta been like “ehh why not just use the DIP chip?” but...
$11.25 AUD, inc GST

Adafruit PCF8574 I2C GPIO Expander Breakout - STEMMA QT / Qwiic

Brand: Adafruit
Expand your project possibilities, with the Adafruit PCF8574 GPIO Expander Breakout - an affordable 8 channel I2C expander.GPIO expanders work like this:...
$8.95 AUD, inc GST

Analog/Digital MUX Breakout

Brand: SparkFun
This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067. This chip is like a rotary switch - it internally routes the common pin (COM in the schematic, SIG on the board) to one of 16 channel pins (CHANxx). It works with both digital and analog signals (the voltage can’t be higher than VCC), and the connections function in either direction. To control it, connect 4 digital outputs to the chip’s address select pins (S0-S3), and send it the binary address of the channel you want (see the datasheet for details). This allows you to connect up to 16 sensors to your system using only 5 pins!
$10.95 AUD, inc GST

Raspberry Pi - Model B+

Brand: Raspberry Pi
The Model B+ was the final revision of the original Raspberry Pi from July 2014, it has been superseeded by multiple revisions of the Raspberry Pi board now.
$69.90 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.