

Add precise satellite positioning to your WisBlock IoT projects with this compact WisBlock GPS/GNSS Module. Built on the Quectel L76K chipset, it provides multi-constellation support and ultra-low power consumption.

Break out STM32WLE5CC pins and prototype LoRaWAN A/B/C or P2P networks with slots for add-on modules, battery, solar and on-board charging.

Break out WisBlock Core signals to four 8-pin headers for dual I2C, UART, SPI, six GPIOs and ADC, enabling seamless external peripheral connections.

Breakout board combining Ambiq Apollo3 MCU with BLE and Semtech SX1262 LoRa for low-power long-range IoT, offering UART/I2C/SPI and 1 MB flash.

Connect QWIIC, STEMMA QT and PiicoDev modules to WisBlock in a sensor slot using a compact JST-SH interface for flexible IoT prototyping.

Single-channel WisBlock relay switches up to 250 VAC/10 A for control of motors, lights and conveyors in IoT projects.

Compact DC–DC converter transforms 5–24 V DC into stable WisBlock power with integrated lithium battery charging for industrial IoT applications.


Modular power board offers USB-C, battery and solar charging to flash and test firmware in WisBlock projects.

Extend WisBlock with 10/100 Base-T Ethernet via SPI using WIZnet W5100S, featuring PoE headers, Wake-on-LAN, power-down modes and auto-MDIX negotiation.

Compact LoRa mesh baseboard for Meshtastic with WisBlock sensor slot, versatile antenna connectors and mounting holes for neat DIY networks.

PoE module uses Silver Ag99005MT to supply 5V/9W from IEEE802.3af-compliant and featuring short-circuit and thermal protection for WisBlock projects.

High-precision UWB module with Decawave DW1000 for real-time location and extended range in RTLS, asset tracking and factory automation.

A multi-protocol IoT node with LoRaWAN®, BLE 5.0 and LTE-M/NB-IoT in an IP65 enclosure.

SSD1680 2.13″ e-paper panel renders black, white or red images reflectively. Bi-stable architecture and ultra-low power suit IoT and maker builds.

Build DIY customised off-grid LoRa mesh networks with high-gain rubber antennas and Nordic nRF52840 cores for reliable kilometre-range connectivity.

Omnidirectional 902-928 MHz dipole antenna provides 5.8 dBi gain and 360° coverage for LoRaWAN with weatherproof fibreglass housing and N-type connector.

Securely link LoRa modules to external antennas with iPEX MHF-1 to RP-SMA/SMA RF coaxial cables for stable signal reception.

IP67-rated outdoor sub-GHz antenna offers 8dBi gain via integrated connector, extending AU915 and AS923 coverage in rural or elevated deployments.

A pre-crimped connector perfect for RAKWireless boards (and others) with the same wiring polarity.

Communicate reliably off-grid with the WisMesh Pocket V2, a pre-configured Meshtastic node. Powered by the ultra-low-energy RAK4630 module and a 3200mAh battery, it enables long-range text messaging and GPS tracking without cellular coverage.


IP67-rated outdoor LoRaWAN gateway offering reliable long-range connectivity for industrial IoT with multi-backhaul and remote management.

Second-generation modular base board with USB-C input, battery and solar charging, isolated GNSS slot and dynamic power switching for IoT projects.

A pre-crimped connector perfect for RAKWireless boards (and others) with the same wiring polarity.

A transparent acrylic enclosure offers open, stackable PCB protection in a 105×75×30 mm design. Perfect for benchtop prototyping with the WisBlock ecosystem.


Modular base board with two IO and six sensor slots, GPIO pads and flexible power via USB-C, batteries or solar for compact IoT prototyping.


Modular IoT prototyping board handles MCU and sensor modules via plug-and-play slots, supports USB, LiPo or solar power and is optimised for low-power use.


Safely control circuits and isolate logic inputs. Driven by an ESP32-S3, this DIN-rail mountable hub features robust optocoupler isolation and comprehensive connectivity, including RS485.

A fully certified and connectivity-enabled development board that will take projects from the prototyping to the production phase.



The wireless module used in the Pico W development boards - now in a module you can use in your own projects!

Bring programmable switching to a DIN rail - high-power relays, isolated field inputs and a wired network connection in one unit.


Makers love reviews as much as you do, please follow this link to review the products you have purchased.
Controlling Hardware With Meshtastic Messages | Meshtastic for Makers Workshop
Sending Sensor Data With The Detect Sensor Module | Meshtastic for Makers Workshop
MQTT Integration (Adafruit IO and Home Assistant) | Meshtastic for Makers Workshop
Practical Project Using LoRaWAN + TTN + LoPy4 + NodeRED + Raspberry Pi