Search results for: 'rakwireless'

Build DIY customised off-grid LoRa mesh networks with high-gain rubber antennas and Nordic nRF52840 cores for reliable kilometre-range connectivity.

Omnidirectional 902-928 MHz dipole antenna provides 5.8 dBi gain and 360° coverage for LoRaWAN with weatherproof fibreglass housing and N-type connector.

Break out STM32WLE5CC pins and prototype LoRaWAN A/B/C or P2P networks with slots for add-on modules, battery, solar and on-board charging.

Add precise satellite positioning to your WisBlock IoT projects with this compact WisBlock GPS/GNSS Module. Built on the Quectel L76K chipset, it provides multi-constellation support and ultra-low power consumption.

Securely link LoRa modules to external antennas with iPEX MHF-1 to RP-SMA/SMA RF coaxial cables for stable signal reception.

Multi-channel LoRaWAN gateway with multi-backhaul Ethernet, Wi-Fi and cellular, PoE and LED status monitoring plus remote management for edge IoT networks.

A pre-crimped connector perfect for RAKWireless boards (and others) with the same wiring polarity.

IP67-rated outdoor LoRaWAN gateway offering reliable long-range connectivity for industrial IoT with multi-backhaul and remote management.

IP67-rated outdoor sub-GHz antenna offers 8dBi gain via integrated connector, extending AU915 and AS923 coverage in rural or elevated deployments.

High-sensitivity GNSS module delivers ±2.5 m accuracy and 10 Hz updates across GPS, GLONASS, QZSS and BeiDou for low-power IoT trackers.

Communicate reliably off-grid with the WisMesh Pocket V2, a pre-configured Meshtastic node. Powered by the ultra-low-energy RAK4630 module and a 3200mAh battery, it enables long-range text messaging and GPS tracking without cellular coverage.

A pre-crimped connector perfect for RAKWireless boards (and others) with the same wiring polarity.

Breakout board combining Ambiq Apollo3 MCU with BLE and Semtech SX1262 LoRa for low-power long-range IoT, offering UART/I2C/SPI and 1 MB flash.

Break out WisBlock Core signals to four 8-pin headers for dual I2C, UART, SPI, six GPIOs and ADC, enabling seamless external peripheral connections.

Modular base board with two IO and six sensor slots, GPIO pads and flexible power via USB-C, batteries or solar for compact IoT prototyping.

Connect QWIIC, STEMMA QT and PiicoDev modules to WisBlock in a sensor slot using a compact JST-SH interface for flexible IoT prototyping.

Single-channel WisBlock relay switches up to 250 VAC/10 A for control of motors, lights and conveyors in IoT projects.

High-efficiency omnidirectional indoor LoRa antennas with RP-SMA male connectors deliver reliable 915 MHz coverage for gateways and nodes.

Use a rugged outdoor low-loss feed line to relocate antennas and boost LoRaWAN coverage for edge gateways with minimal signal loss.

Compact DC–DC converter transforms 5–24 V DC into stable WisBlock power with integrated lithium battery charging for industrial IoT applications.

Modular IP65 outdoor IoT enclosure with integrated solar panel and mounts, offering spacious internals and brass inserts for custom sensor setups.

Second-generation modular base board with USB-C input, battery and solar charging, isolated GNSS slot and dynamic power switching for IoT projects.

Modular IoT prototyping board handles MCU and sensor modules via plug-and-play slots, supports USB, LiPo or solar power and is optimised for low-power use.

A transparent acrylic enclosure offers open, stackable PCB protection in a 105×75×30 mm design. Perfect for benchtop prototyping with the WisBlock ecosystem.

SSD1680 2.13″ e-paper panel renders black, white or red images reflectively. Bi-stable architecture and ultra-low power suit IoT and maker builds.

Modular power board offers USB-C, battery and solar charging to flash and test firmware in WisBlock projects.

A multi-protocol IoT node with LoRaWAN®, BLE 5.0 and LTE-M/NB-IoT in an IP65 enclosure.

High-precision UWB module with Decawave DW1000 for real-time location and extended range in RTLS, asset tracking and factory automation.

Compact LoRa mesh baseboard for Meshtastic with WisBlock sensor slot, versatile antenna connectors and mounting holes for neat DIY networks.

A pocket-sized, ready-to-use LoRa mesh node - just power on and pair with your phone for off-grid messaging.

Extend WisBlock with 10/100 Base-T Ethernet via SPI using WIZnet W5100S, featuring PoE headers, Wake-on-LAN, power-down modes and auto-MDIX negotiation.

PoE module uses Silver Ag99005MT to supply 5V/9W from IEEE802.3af-compliant and featuring short-circuit and thermal protection for WisBlock projects.