Search results for: 'plastic standoffs'
Black Nylon Screw and Stand-off Set – M2.5 Thread
Brand: Adafruit
Totaling 380 pieces, this M2.5 Screw Set is a must-have for your workstation. You'll have enough screws, nuts, and hex standoffs to fuel your maker tendencies for...
$35.30 AUD, inc GST
White Nylon Screw and Stand-off Set – M2.5 Thread
Brand: Adafruit
Totaling 420 pieces, this White Nylon M2.5 Screw Set is a must-have smörgåsbord for your workstation. You'll have more than enough screws, nuts, and hex standoffs...
$31.40 AUD, inc GST
M3 Mounting Kit (Standoffs)
Brand: DFRobot
This M3 mounting kit provides you with different types of standoffs with screws and nuts which are most commonly used in DFRobot's projects. We use them to mount circuit boards and help build robots.
$39.74 AUD, inc GST
10 sets M3 * 20 nylon standoffs
Brand: DFRobot
Suitable for all kinds of circuit boards, sensors, mechanical support of the installation.
$3.47 AUD, inc GST
10 sets M3 * 10 nylon standoff
Brand: DFRobot
These screw can be used to isloate your circuit board. It is suitable for all kinds of circuit boards, sensors, mechanical mounting.
$2.37 AUD, inc GST
Black Nylon Screw and Stand-off Set – M3 Thread
Brand: Adafruit
Totaling 420 pieces, this M3 Screw Set is a must-have for your workstation. You'll have enough screws, nuts, and hex standoffs to fuel your maker tendencies for days on end!
$36.20 AUD, inc GST
10 sets M3 * 30 nylon standoffs
Brand: DFRobot
Suitable for all kinds of circuit boards, sensors, mechanical support of the installation.
$3.61 AUD, inc GST
Standoffs Plastic - (4-40; 3/4"; 10 pack)
Brand: Sparkfun
These nylon standoffs are ¾" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure, or just getting it up off the table.
$7.65 AUD, inc GST
1500 Series Plastic Spacer (8mm ID x 10mm OD, 1mm Thickness) - 12 Pack
Brand: goBilda
A plastic spacer with an inner diameter for 8mm
$4.50 AUD, inc GST
Standoffs Plastic (4-40; 3/8"; 10 pack)
Brand: Sparkfun
These nylon standoffs are 3/8" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure, or just getting it up off the table.
$6.40 AUD, inc GST
10 sets M3 * 10 hexagonal standoffs mounting kit
Brand: DFRobot
Suitable for all kinds of circuit boards, sensors, mechanical support of the installation. They are great for building a multi-level robot chassis. This 10-pack of standoffs includes 10 sets screws and nuts for securing the top of the standoff to your project.
$3.96 AUD, inc GST
10 sets M3 * 20 hexagonal standoffs mounting kit
Brand: DFRobot
Suitable for all kinds of circuit boards, sensors, mechanical support of the installation.
$5.16 AUD, inc GST
M2.5 Standoffs for Pi HATs
Brand: Pimoroni
These standoffs are perfect for keeping your HATs off of your Raspberry Pi
$3.95 AUD, inc GST
10 sets M3 * 50 hexagonal standoffs mounting kit
Brand: DFRobot
Suitable for all kinds of circuit boards, sensors, mechanical support of the installation. They are great for building a multi-level robot chassis.
$7.71 AUD, inc GST
10 sets M3 * 30 hexagonal standoffs mounting kit
Brand: DFRobot
Suitable for all kinds of circuit boards, sensors, mechanical support of the installation.
$5.74 AUD, inc GST
Grid-Link for 8mm Pitch Steel Chain - 6 Pack
Brand: goBilda
The Grid-Link is the "missing link" that opens up a world of linear motion possibilities.
$13.10 AUD, inc GST
1501 Series Standoffs Bundle
Brand: goBilda
Standoffs can provide clearance, adjust the distance between parallel parts, add structural integrity, add a threaded hole for mounting other components, or mount a bearing on in a rotating assembly.
$229.95 AUD, inc GST
Google AIY Vision Full Kit - Includes Pi Zero WH - v1.1
Brand: Adafruit
Google AIY Projects brings do-it-yourself artificial intelligence to your maker projects. The Google AIY Vision Kit lets you build an image recognition device that...
$229.95 AUD, inc GST
Similar matches
Brass M2.5 Standoffs for Pi HATs - Black Plated - Pack of 2
Brand: Adafruit
"These go to eleven." 11 millimeters that is! Adafruit's Black Plated M/F Brass Standoffs are engineered specifically to keep your Pi HAT snug on your Pi while also keeping...
$1.90 AUD, inc GST
Aluminum Standoff for Raspberry Pi: 18.6mm Length, 6mm M2.5 Thread, M-F (4-Pack)
Brand: Pololu
These hexagonal male-female aluminum standoffs are intended specifically for use with the Raspberry Pi. They keep parts spaced 18.6 mm apart, which is...
$6.50 AUD, inc GST
Aluminum Standoff for Raspberry Pi: 11mm Length, 4mm M2.5 Thread, M-F (4-Pack)
Brand: Pololu
These hexagonal male-female aluminum standoffs are intended specifically for use with the Raspberry Pi. They keep parts spaced 11 mm apart, which is just...
$5.45 AUD, inc GST
Aluminum Standoff for Raspberry Pi: 11mm Length, 6mm M2.5 Thread, M-F (4-Pack)
Brand: Pololu
These hexagonal male-female aluminum standoffs are intended specifically for use with the Raspberry Pi. They keep parts spaced 11 mm apart, which is just...
$5.55 AUD, inc GST
Brass M2.5 Standoffs 16mm tall - Black Plated - Pack of 2
Brand: Adafruit
Finally Adafruit get Adafruit's very own super sweet sixteen... 16 millimeters that is! Adafruit's Black Plated M/F Brass 16mm Standoffs are engineered specifically to keep your PiTFT...
$2.95 AUD, inc GST
Standoff Kit - 210 Piece
Brand: Sparkfun
This 210 piece brass standoff kit insures you'll always have a set handy...
$40.45 AUD, inc GST
8mm Pitch Slip-Fit Idler Sprocket (6mm Bore, 8 Tooth) - 2 Pack
Brand: goBilda
This idler sprocket lets you add tension to your 8mm pitch chain in an assembly. It slips onto a 6mm OD standoff, spacer, or shaft. It also.....
$8.40 AUD, inc GST
1501 Series M4 x 0.7mm Standoff (6mm OD, 14mm Length) - 4 Pack
Brand: goBilda
14mm length standoffs can be used to add structural rigidity between parallel plates, as a stub-axle to run bearings and rotating...
$5.20 AUD, inc GST
Aluminum Standoff: 1/4" Length, 2-56 Thread, M-F (4-Pack)
Brand: Pololu
These hexagonal male-female aluminum standoffs keep parts spaced 0.25" (6 mm) apart and are great for building a multi-level robot chassis. Both ends of these 3/16"-wide standoffs have 2-56 threads. The standoffs are sold in packs of 4.
$5.05 AUD, inc GST
1501 Series M4 x 0.7mm Standoff (6mm OD, 24mm Length) - 4 Pack
Brand: goBilda
A 24mm long aluminium standoff for M4 threaded screws
$6.25 AUD, inc GST
Aluminum Standoff: 1/2" Length, 4-40 Thread, F-F (4-Pack)
Brand: Pololu
These 1/2"-long hexagonal female-female aluminum standoffs keep parts spaced 0.5 inches (13 mm) apart. They are like elongated, 3/16″-wide hex nuts, with 4-40 threads running through the entire length of each standoff. They are sold in packs of 4.
$7.20 AUD, inc GST
1501 Series M4 x 0.7mm Standoff (6mm OD, 18mm Length) - 4 Pack
Brand: goBilda
18mm length standoffs can be used to add structural rigidity between parallel plates, as a dead-axle to run bearings and rotating...
$5.55 AUD, inc GST
Aluminum Standoff: 3/4" Length, 2-56 Thread, M-F (4-Pack)
Brand: Pololu
These hexagonal male-female aluminum standoffs keep parts spaced 0.75" (19 mm) apart and are great for building a multi-level robot chassis.Both ends of these 3/16"-wide standoffs have 2-56 threads. The standoffs are sold in packs of 4.
$5.25 AUD, inc GST
SparkFun ISP Pogo Adapter v2
Brand: Sparkfun
The ISP Pogo Adapter, a simple and easy way to adapt pogo pins to a 6-pin ISP header allowing you to program an IC still without soldering a header...
$27.50 AUD, inc GST
Aluminum Standoff: 1" Length, 2-56 Thread, M-F (4-Pack)
Brand: Pololu
These hexagonal male-female aluminum standoffs keep parts spaced 1.0" (25 mm) apart and are great for building a multi-level robot chassis. Both ends of these 3/16"-wide standoffs have 2-56 threads. The standoffs are sold in packs of 4.
$6.45 AUD, inc GST
Aluminum Standoff: 1-1/2" Length, 2-56 Thread, M-F (4-Pack)
Brand: Pololu
These hexagonal male-female aluminum standoffs keep parts spaced 1.5" (38 mm) apart and are great for building a multi-level robot chassis. Both ends of...
$8.95 AUD, inc GST
Aluminum Standoff: 1-1/4" Length, 2-56 Thread, M-F (4-Pack)
Brand: Pololu
These hexagonal male-female aluminum standoffs keep parts spaced 1.25" (32 mm) apart and are great for building a multi-level robot chassis. Both ends of these 3/16"-wide standoffs have 2-56 threads. The standoffs are sold in packs of 4.
$8.55 AUD, inc GST
1513 Series Offset Standoff (4mm Length) - 4 Pack
Brand: goBilda
For those times where it would be helpful to have holes offset 4mm from the original locations. Offset standoffs have three mounting...
$10.10 AUD, inc GST
Aluminum Standoff: 1-1/4" Length, 4-40 Thread, M-F (4-Pack)
Brand: Pololu
These hexagonal male-female aluminum standoffs keep parts spaced 1.25" (32 mm) apart and are great for building a multi-level robot chassis. Both ends of these 3/16"-wide standoffs have 4-40 threads. The standoffs are sold in packs of 4.
$8.40 AUD, inc GST
Aluminum Standoff: 1" Length, 4-40 Thread, M-F (4-Pack)
Brand: Pololu
These hexagonal male-female aluminum standoffs keep parts spaced 1.0" (25 mm) apart and are great for building a multi-level robot chassis. Both ends of these 3/16"-wide standoffs have 4-40 threads. The standoffs are sold in packs of 4.
$7.85 AUD, inc GST
Aluminum Standoff: 1/2" Length, 2-56 Thread, M-F (4-Pack)
Brand: Pololu
These hexagonal male-female aluminum standoffs keep parts spaced 0.5" (13 mm) apart and are great for building a multi-level robot chassis. Both ends of these 3/16"-wide standoffs have 2-56 threads. The standoffs are sold in packs of 4.
$4.95 AUD, inc GST
Aluminum Standoff: 1/4" Length, 4-40 Thread, F-F (4-Pack)
Brand: Pololu
These 1/4"-long hexagonal female-female aluminum standoffs keep parts spaced 0.25 inches (6.4 mm) apart. They are like elongated, 3/16″-wide hex nuts, with 4-40 threads running through the entire length of each standoff. They are sold in packs of 4.
$6.20 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.