Search results for: 'piicodev cable 200 mm'

50 results

PiicoDev Cable 200mm

Brand: PiicoDev
This 200mm cable is for connecting PiicoDev modules together - it is a 4-wire harness with 1mm pitch SH connectors on each end.
$0.98 AUD, inc GST

PiicoDev Prototyping Cable (Male) 200mm

Brand: PiicoDev
This 200mm cable breaks out the four wires in a PiicoDev cable for manual wiring to breadboards or development boards. It's a 4-wire harness with an SH connector on one end and four Dupont-style connectors on the other.
$0.95 AUD, inc GST

PiicoDev Prototyping Cable (Female) 200mm

Brand: PiicoDev
This 200mm cable breaks out the four wires in a PiicoDev cable for manual wiring to breadboards or development boards. It's a 4-wire harness with an SH connector on one end and four Dupont-style connectors on the other.
$2.70 AUD, inc GST

PiicoDev Cable Expansion Kit

Brand: PiicoDev

Top up your PiicoDev Starter kit with a range of the most used cables!

$12.76 AUD, inc GST

Flexible Qwiic Cable - 200mm

Brand: Sparkfun
This is a 200mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be used for other applications...
$4.05 AUD, inc GST

STEMMA QT / Qwiic JST SH 4-Pin Cable - 200mm Long

Brand: Adafruit
This 4-wire cable is a little over 200mm / 7.8" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH these are 1mm...
$2.55 AUD, inc GST

1.25mm Pitch 4-pin Cable 20cm long 1:1 Symmetric Cable - Molex PicoBlade Compatible

Brand: Adafruit
When 0.1" is too big, and JST PH's too chunky, this ultra-slim 1.25mm connector cable is a reliable alternative. These are 1.25mm pitch but have a nice clicky connection.
$1.85 AUD, inc GST
Similar matches

PiicoDev Cable 50mm

Brand: PiicoDev
This 50mm cable is for connecting PiicoDev modules together - it is a 4-wire harness with 1mm pitch SH connectors on each end.
$0.80 AUD, inc GST

PiicoDev Cable 100mm

Brand: PiicoDev
This 100mm cable is for connecting PiicoDev modules together - it is a 4-wire harness with 1mm pitch SH connectors on each end.
$0.85 AUD, inc GST

Raspberry Pi Camera FPC Adapter Cable 200mm

Brand: Raspberry Pi

These cables enable communication between the Raspberry Pi 5 and current CSI-connected camera products.

$1.83 AUD, inc GST

PiicoDev Cable 500mm

Brand: PiicoDev
This 500mm cable is for connecting PiicoDev modules together - it is a 4-wire harness with 1mm pitch SH connectors on each end.
$1.35 AUD, inc GST

Raspberry Pi Display FPC Adapter Cable 200mm

Brand: Raspberry Pi

These cables enable communication between the Raspberry Pi 5 and current DSI-connected display products.

$1.83 AUD, inc GST

Raspberry Pi Camera FPC Adapter Cable 500mm

Brand: Raspberry Pi

These cables enable communication between the Raspberry Pi 5 and current CSI-connected camera products.

$5.38 AUD, inc GST

Raspberry Pi Camera FPC Adapter Cable 300mm

Brand: Raspberry Pi

These cables enable communication between the Raspberry Pi 5 and current CSI-connected camera products.

$3.55 AUD, inc GST

Flex Cable for Raspberry Pi Camera - 1 metre

Brand: Adafruit
This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in.
$8.25 AUD, inc GST

Raspberry Pi GPIO 40-Pin Ribbon Cable

Brand: Core Electronics
Extend your Raspberry Pi's functionality with this rainbow ribbon cable!
$3.70 AUD, inc GST

Flexible Qwiic Cable - 100mm

Brand: Sparkfun
This is a 100mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be used for other applications...
$3.80 AUD, inc GST

Flex Cable for Raspberry Pi Camera - 457mm / 18"

Brand: Adafruit
This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in.
$5.20 AUD, inc GST

Flex Cable for Raspberry Pi Camera - 300mm / 12"

Brand: Adafruit
This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in.
$3.80 AUD, inc GST

Flexible Qwiic Cable - 500mm

Brand: Sparkfun
This is a 500mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be used for other applications...
$5.80 AUD, inc GST

Raspberry Pi Display FPC Adapter Cable 300mm

Brand: Raspberry Pi

These cables enable communication between the Raspberry Pi 5 and current DSI-connected display products.

$3.55 AUD, inc GST

Flexible Qwiic Cable - 50mm

Brand: Sparkfun
This is a 50mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be used for other applications...
$2.75 AUD, inc GST

2-Pin Female JST PH-Style Cable (14cm)

Brand: Pololu
This 5.5" (14cm) cable has two 26AWG conductors with a 2mm-pitch 2-pin female JST PH-style connector. The other ends of the wires are unterminated; they can be cut to length to match your application. The red and black wires are twisted together to reduce noise.
$3.20 AUD, inc GST

2-Pin Female JST XH-Style Cable (15cm)

Brand: Pololu
This 6" (15cm) cable has two 26AWG conductors with a 2.5mm-pitch 2-pin female JST XH-style connector. The spacing is very close to 0.1", which means this connector will work with 0.1" male header pins and standard perfboards and solderless breadboards. The other ends of the wires are unterminated; they can be cut to length to match your application. The red and black wires are twisted together to reduce noise.
$3.30 AUD, inc GST

Micro HDMI to standard HDMI cables 2m white

Brand: Raspberry Pi
Used for the Raspberry Pi 4 Model B and other devices that have a micro-HDMI output on them, for connection to full HDMI displays
$14.95 AUD, inc GST

1.25mm Pitch 2-pin Cable 20cm long 1:1 Cable - Molex PicoBlade Compatible

Brand: Adafruit
When 0.1" is too big, and JST PH's too chunky, this ultra-slim 1.25mm connector cable is a reliable alternative. These are 1.25mm pitch but have a nice clicky connection.
$1.50 AUD, inc GST

24AWG White 4 Core Security Cable (per metre)

Brand: Core Electronics

If you need data and power somewhere far from your control box - grab some of this cable!

$1.05 AUD, inc GST

Flex Cable for Raspberry Pi Camera - 200mm / 8"

Brand: Adafruit
This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in.
$3.60 AUD, inc GST

22-pin 0.5mm pitch FPC Flex Cable for DSI CSI or HSTX - 10cm

Brand: Adafruit
Connect this to that when a 22-pin FPC connector is needed. This 10 cm long cable is made of a flexible PCB. It's A-B style, meaning that pin one on...
$1.85 AUD, inc GST

Adafruit CSI or DSI Cable Extender Thingy for Raspberry Pi

Brand: Adafruit
Every time someone posts on the Adafruit forums and says they need to have a really long cable for their Pi Camera (CSI) or Pi Display (DSI), Adafruit say, "Oh you mean...
$5.95 AUD, inc GST

24-pin eInk / ePaper Extension Cable 0.5mm Pitch - 25cm Long

Brand: Adafruit
For when you need more distance between you and your eInk display
$2.90 AUD, inc GST

JST PH 4-Pin Socket to Color Coded Cable - 200mm

Brand: Adafruit

This cable will let you turn a JST PH 4-pin cable socket into 4 individual tinned wires. These are great to match up with Adafruit's JST 4-PH cables, for extending and...

$2.10 AUD, inc GST

Flex Cable for Raspberry Pi Camera - 2 metre

Brand: Adafruit
This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in.
$12.40 AUD, inc GST

22-Pin 0.5mm Pitch FPC Cable - 20cm

Brand: Sparkfun
A 22-pin, 200mm flat, flexible cable with 0.5mm pitch. These cables are A-B style, so pin one on one side will match with pin one on the other side. Use...
$0.93 AUD, inc GST

40 Pin GPIO Extension Cable for any 2x20 Pin Raspberry Pi - 150mm / 6 long

Brand: Adafruit
That new Raspberry Pi 400 computer you just got has a row of 2x20 pin headers on the right side - those are the GPIO (general purpose input/output) pins, and for those of Adafruit who like to hack electronics, they are where the real fun lies
$8.10 AUD, inc GST

Molex Pico Blade 2-pin Cable - 200mm

Brand: Adafruit
When 0.1" is too big, and JST PH's too chunky, the ultra-slim "PicoBlade" is a reliable alternative. These are only 1.25mm pitch, but have a nice clicky connection...
$1.95 AUD, inc GST

Flex Cable for Raspberry Pi Camera - 610mm / 24"

Brand: Adafruit
This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in.
$5.70 AUD, inc GST

Raspberry Pi Display FPC Adapter Cable 500mm

Brand: Raspberry Pi

These cables enable communication between the Raspberry Pi 5 and current DSI-connected display products.

$5.38 AUD, inc GST

24-pin 0.5mm pitch FPC Flex A-B (D) type Cable - 100mm long

Brand: Adafruit
Connect this to that when a 24-pin FPC connector is needed. This 10 cm long cable is made of a flexible PCB. It's A-B style (sometimes referred to as...
$1.70 AUD, inc GST

6-Pin Single-Ended Female JST SH-Style Cable 30cm

Brand: Pololu
This 30 cm (12") cable has six 28 AWG wires and a 6-pin female JST SH-type connector that works with our Micro Metal Gearmotor Encoders with top-entry...
$4.95 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.