Search results for: 'lead screw nuts'

The pattern on this lead screw nut allows you to fasten it to a part which possesses the 16mm pattern - whether thru-hole or threaded. The.....

This specialized nut is for creating linear motion with v-guide and 1120 Series U-Channel. The threaded holes in the sides allow the Angle.....

The barrel nut, while simple, is incredibly versatile when paired with a 12mm clamping hub. This two-piece approach allows you to adjust...

The unique shape of this lead screw nut allows it to index with the bore of Open goRAIL to create a linear drive with all kinds of.....

This specialized nut is intended to index inside the square bore of goRAIL or.....

A 550mm Length 3501 Series Lead Screw (8mm Lead, 4 Start)

This 5mm diameter magnet is made to fit in the recesses found on the Open goRAIL Nut or the Lead Screw Square Nut. By installing a magnet.....

This Dolly Kit is built specifically with V-Guide in mind. Four V-Groove Bearings get mounted on each side of the aluminum plates, and are properly spaced so that they align with V-Guide mounted inside of 1120 Series U-Channel.

This NEMA 17-size hybrid bipolar stepping motor has an integrated 28 cm (11″) threaded rod as its output shaft, turning it into a linear actuator capable of precision open-loop positioning. The included traveling nut has four mounting holes and moves 40 µm (1.6 mil) per full step; finer resolution can be achieved with microstepping. The stepper motor has a 1.8° step angle (200 steps/revolution) and each phase draws 1.7 A at 2.8 V, allowing for a holding torque of 3.7 kg-cm (51 oz-in).

This NEMA 17-size hybrid bipolar stepping motor has an integrated 18 cm (7″) threaded rod as its output shaft, turning it into a linear actuator capable of precision open-loop positioning. The included traveling nut has four mounting holes and moves 40 µm (1.6 mil) per full step; finer resolution can be achieved with microstepping. The stepper motor has a 1.8° step angle (200 steps/revolution) and each phase draws 1.7 A at 2.8 V, allowing for a holding torque of 3.7 kg-cm (51 oz-in).

Looking for another way to keep your project cool? These plug-and-play USB-ready 5V Fans provide instant gratification and prevent your goodies from...

This NEMA 17-size hybrid bipolar stepping motor has an integrated 38 cm (15") threaded rod as its output shaft, turning it into a linear actuator capable...

This Limit Switch Trigger is able to fasten to one end of the 3503-0804-0038 Lead Screw Nut. The profile is matched to that of Open goRAIL.....

The 1118 Series Open goRAIL Bundle is a great way to pick up a variety of sizes of Open goRAIL, or you can purchase specific lengths.....

Looking for another way to keep your project cool? These plug-and-play USB-ready 5V Fans provide instant gratification and prevent your goodies from...

This pattern mount fastens to structure with the threaded posts and positions the pattern 24mm from the mounting surface. The 24mm.....

Keep your power source safe and toasty in these waterproof 3xAA battery holders. They're just like classic switched battery holders, but designed for survival! The...

This copper alloy traveling nut is intended for use with Tr8×8(P2) threaded rods and features a mounting flange with four holes threaded for M3 screws....

This tiny DC Motor in Micro Servo Body is an interesting motor - it's the same size and shape as Adafruit's micro servo but it isn't a servo. It's more like a DC motor...

This DC gearmotor has an integrated M4*55mm threaded rod as its output shaft, turn it into a linear actuator. 6V rated voltage, the no-load speed could arrive 150RPM, equivalent to 1.75mm/s. The brass faceplate has two mounting holes threaded for M1.6 screws (1.6mm diameter, 0.35mm thread pitch), or you can use the mounting bracket or extended mounting bracket, which are specifically designed to securely mount the gear motor while enclosing the exposed gears.

A 150mm Length 3501 Series Lead Screw (8mm Lead, 4 Start)

A 400mm Length 3501 Series Lead Screw (8mm Lead, 4 Start)

This Hyper Hub has a threaded bore to match our 8mm lead.....

A 300mm Length 3501 Series Lead Screw (8mm Lead, 4 Start)

A 650mm Length 3501 Series Lead Screw (8mm Lead, 4 Start)

This lead screw collar provides a way to hold an 8mm lead screw in place axially. The bore precisely matches the 8mm lead screw in order to.....

A 350mm Length 3501 Series Lead Screw (8mm Lead, 4 Start)

A 250mm Length 3501 Series Lead Screw (8mm Lead, 4 Start)

A 1250mm Length 3501 Series Lead Screw (8mm Lead, 4 Start)

A 100mm Length 3501 Series Lead Screw (8mm Lead, 4 Start)

A 450mm Length 3501 Series Lead Screw (8mm Lead, 4 Start)

A 200mm Length 3501 Series Lead Screw (8mm Lead, 4 Start)

A 950mm Length 3501 Series Lead Screw (8mm Lead, 4 Start)