Search results for: 'jst zh'

45 results

Breadboard to JST-ZHR Cable - 4-pin x 1.5mm Pitch

Brand: SparkFun
This is a 4-pin JST-ZHR cable that's terminated on the end with breadboard compatible Dupont connectors. The four male pins that terminate one side of the cable...
$3.20 AUD, inc GST

JST-ZHR Cable - 5-pin, 1.5mm

Brand: SparkFun
This is a 5-pin JST-ZHR cable that's terminated on the end with breadboard breadboard compatible Dupont connectors. It's the same cable that comes with our SPS30...
$7.20 AUD, inc GST

Breadboard to JST-ZHR Cable - 6-pin x 1.5mm Pitch

Brand: SparkFun
This is a 6-pin JST-ZHR cable that's terminated on the end with breadboard compatible Dupont connectors. The six male pins that terminate one side of the cable feature...
$4.75 AUD, inc GST

3-Pin Female JST ZH-Style Cable (30cm) for Sharp GP2Y0A51 Distance Sensors

Brand: Pololu
This 12-inch (30-cm) cable has 28 AWG wires and a 3-pin female JST ZH-style connector that mates with the 3-pin connector on Sharp GP2Y0A51 analog...
$3.25 AUD, inc GST

Sharp GP2Y0A51SK0F Analog Distance Sensor 2-15cm

Brand: Pololu
The GP2Y0A51SK0F is the shortest-range Sharp analog distance sensor we carry, featuring a detection range of 0.8" to 6" (2 cm to 15 cm). The shorter range...
$30.75 AUD, inc GST
Similar matches

JST PH 2.0mm Pitch Connector Kit - 220 Piece Kit

Brand: Adafruit
Totally 220 pieces, this JST-PH Connector Kit is a must-have for your workstation. You'll have enough sockets and plugs to fuel your maker tendencies for days on...
$23.80 AUD, inc GST

JST connector Kit (2.0mm)

Brand: DFRobot
This kit includes PHR-2,PHR-3 and PHR-4 housing (20 units each), through-hole type shrouded header (20 units each)and crimp contact (100 units).
$9.97 AUD, inc GST

JST PH 3-Pin Plug to Male Header Cable - 200mm

Brand: Adafruit
This cable will let you turn a JST PH 3-pin cable port into 3 individual wires with high-quality 0.1" male header plugs on the end. Adafruit are carrying these to match...
$2.60 AUD, inc GST

2-Pin Female JST PH-Style Cable (14cm)

Brand: Pololu
This 5.5" (14cm) cable has two 26AWG conductors with a 2mm-pitch 2-pin female JST PH-style connector. The other ends of the wires are unterminated; they can be cut to length to match your application. The red and black wires are twisted together to reduce noise.
$3.20 AUD, inc GST

2.5mm Pitch 4-pin Cable Matching Pair - JST XH compatible

Brand: Adafruit
These solid 2.5mm pitch connector cable pairs are great when you need something that can carry a couple amps of current, easy to connect and disconnect, and is just-about 0.1" pitch compatible.
$2.10 AUD, inc GST

2.5mm Pitch 6-pin Cable Matching Pair - JST XH compatible

Brand: Adafruit
These solid 2.5mm pitch connector cable pairs are great when you need something that can carry a couple amps of current, easy to connect and disconnect, and is just-about 0.1" pitch compatible.
$3.10 AUD, inc GST

JST SH 1mm Pitch 3 Pin to Socket Headers Cable - 100mm long

Brand: Adafruit
If you're fancying to connect to the debug port on a Pico WH, or the two ports on a Pico Debug Probe or anything else with a JST SH compatible 3-pin...
$2.90 AUD, inc GST

6-Pin Single-Ended Female JST SH-Style Cable 30cm

Brand: Pololu
This 30 cm (12") cable has six 28 AWG wires and a 6-pin female JST SH-type connector that works with our Micro Metal Gearmotor Encoders with top-entry...
$4.95 AUD, inc GST

JST GH 1.25mm Pitch 6 Pin Cable - 100mm long

Brand: Adafruit
This cable is a little over 100mm / 4" long and fitted with JST-GH compatible 6-pin connectors on either end. We dig the solid and compact nature of...
$1.95 AUD, inc GST

6-Pin Female-Female JST SH-Style Cable 16cm

Brand: Pololu
This 16 cm (6.3") cable has six 28 AWG wires and 6-pin female JST SH-type connectors on both ends. These connectors work with our Micro Metal Gearmotor ...
$6.05 AUD, inc GST

Breakout for JST SH-Style Connector, 5-Pin Male Side-Entry (2-Pack)

Brand: Pololu
These simple boards serve as adapters between a JST SH-style 5-pin male connector and breadboard-compatible 0.1"-pitch through holes. They work with our...
$3.30 AUD, inc GST

3-Pin Female JST PH-Style Cable for Sharp Distance Sensors (30cm)

Brand: Pololu
This 12-inch (30-cm) cable has 26 AWG wires and a 3-pin female JST PH-style connector that mates with the connector on 3-pin Sharp analog distance sensors. The other ends of the wires are unterminated; they can be cut to length to match your application. The wire color scheme matches the Sharp distance sensor pinout: red for power, black for ground, and white for signal.
$3.25 AUD, inc GST

Breakout for JST SH-Style Connector, 3-Pin Male Side-Entry (2-Pack)

Brand: Pololu
These simple boards serve as adapters between a JST SH-style 3-pin male connector and breadboard-compatible 0.1"-pitch through holes. They work with our...
$2.95 AUD, inc GST

4-Pos JST PH [MH-FC] to 4-Pos JST XH [MH-FC] Adaptor (300mm Length)

Brand: goBILDA
This 300mm Length JST adaptor is able to plug into the encoder found on 5000 Series Motors and 52xx Series Gear Motors, using the JST XH Series end.
$4.95 AUD, inc GST

6-Pin Female-Female JST SH-Style Cable 10cm

Brand: Pololu
This 10 cm (4") cable has six 28 AWG wires and 6-pin female JST SH-type connectors on both ends. These connectors work with our Micro Metal Gearmotor ...
$5.60 AUD, inc GST

JST PH to Breadboard Jumper (3-pin)

Brand: SparkFun
This is a simple jumper adapter cable that comes pre-terminated with a female JST connector on one end and a breadboard hookup pigtail on the other. This cable makes it easy to connect components with a JST connector to a breadboard or an Arduino-based device’s pins.
$2.95 AUD, inc GST

JST PH-Style Cable, 6-Pin, Female-Female, 10cm

Brand: Pololu
This 6-conductor, 10 cm (4") cable has 24 AWG wires and 6-pin female JST PH-type connectors (2mm pitch) on both ends...
$5.40 AUD, inc GST

JST RCY Connector Pack, Male

Brand: Pololu
This JST RCY plug is also referred to as a BEC (battery eliminator circuit) connector and is commonly used with battery packs for RC applications. The connector is keyed so that power cannot be reversed. You can use a crimping tool to attach these connectors to your own 22- to 28-AWG wires. This pack contains enough housings and crimp pins (including two spare pins) for 3 male connectors.
$6.30 AUD, inc GST

Breakout for JST SH-Style Connector, 6-Pin Male Top-Entry (3-Pack, Untested)

Brand: Pololu
This simple board serves as an adapter between a JST SH-style 6-pin male connector and breadboard-compatible 0.1"-pitch through holes. It works with our ...
$4.95 AUD, inc GST

4-Pos JST PH [MH-FC] to 4-Pos JST XH [MH-FC] Adaptor (150mm Length)

Brand: goBILDA
This 150mm Length JST adaptor is able to plug into the encoder found on 5000 Series Motors and 52xx Series Gear Motors, using the JST XH.....
$4.90 AUD, inc GST

JST PH-Style Cable, 5-Pin, Female-Female, 10cm

Brand: Pololu
This 5-conductor, 10 cm (4") cable has 24 AWG wires and 5-pin female JST PH-type connectors (2mm pitch) on both ends...
$4.70 AUD, inc GST

JST PH-Style Cable with Female Pins for 0.1" Housings, 2-Pin, 12cm

Brand: Pololu
This 2-conductor, 12 cm (4.5") cable has 24 AWG wires and a 2-pin female JST PH-type connector (2mm pitch) on one end. The other ends of the wires are...
$2.40 AUD, inc GST

JST PH-Style Cable, 4-Pin, Female-Female, 63cm

Brand: Pololu
This 4-conductor, 63 cm (25") cable has 24 AWG wires and 4-pin female JST PH-type connectors (2mm pitch) on both ends...
$7.10 AUD, inc GST

JST SH 4-pin Vertical Connector (10-pack) - Qwiic Compatible

Brand: Adafruit
If you're a DIY enthusiast who likes to micro-manage your project's connections, here is a 10-pack of some micro JST SH connectors! They're solid plastic with 4...
$7.05 AUD, inc GST

3-Pin Female JST PH-Style Cable (30 cm) with Female Pins for 0.1" Housings

Brand: Pololu
This 12-inch (30-cm) cable has 26 AWG wires and a 3-pin female JST PH-style connector that mates with the connector on 3-pin Sharp analog distance sensors. The other ends of the wire are terminated with female pins for 0.1" housing. The wire color scheme matches the Sharp distance sensor pinout: red for power, black for ground, and white for signal.
$4.95 AUD, inc GST

JST SH 4-pin Right Angle Connector (10-pack) - Qwiic Compatible

Brand: Adafruit
If you're a DIY enthusiast who likes to micro-manage your project's connections, here is a 10-pack of some micro JST SH connectors! They're solid plastic with 4...
$7.95 AUD, inc GST

JST SH Vertical 6-Pin Connector - SMD

Brand: SparkFun
Here is a six pin vertical 1.0mm pitch connector. It is useful if you need something very tiny as a connection. These are not the standard JST type connectors we use on most of our boards, but are actually the much smaller JST-SH type.
$3.85 AUD, inc GST

JST SH-Style Connector Board for Micro Metal Gearmotors, 2-Pin, Side-Entry (2-Pack)

Brand: Pololu
Add connectors to your micro metal gearmotors with these boards that feature side-entry, 2-pin male JST SH-type connectors. These boards are compatible...
$3.30 AUD, inc GST

JST SH-Style Connector Board for Micro Metal Gearmotors, 2-Pin, Back-Entry (10-Pack)

Brand: Pololu
Add connectors to your micro metal gearmotors with these boards that feature back-entry, 2-pin male JST SH-type connectors. These boards are compatible...
$9.90 AUD, inc GST

JST PH 3-pin Horizontal Connector (10-pack) - STEMMA

Brand: Adafruit
Designing boards with plug-n-play connectivity is a snap, with STEMMA connectors. Here's a pack of 10 of Adafruit's favorite 2mm pitch connector - the JST PH 3 pin. These...
$6.60 AUD, inc GST

JST SH-Style Connector Board for Micro Metal Gearmotors, 2-Pin, Side-Entry (10-Pack)

Brand: Pololu
Add connectors to your micro metal gearmotors with these boards that feature side-entry, 2-pin male JST SH-type connectors. These boards are compatible...
$9.90 AUD, inc GST

Breakout for JST PH-Style Connector, 5-Pin Male Side-Entry, with SH

Brand: Pololu
This simple board serves as an adapter between a JST PH-style 5-pin, side-entry connector and breadboard-compatible 0.1"-pitch through holes. The PH...
$2.95 AUD, inc GST

JST PH-Style Cable with Female Pins for 0.1" Housings, 5-Pin, 30cm

Brand: Pololu
This 5-conductor, 30 cm (12") cable has 24 AWG wires and a 5-pin female JST PH-type connector (2mm pitch) on one end. The other ends of the wires are...
$5.90 AUD, inc GST

JST SH Horizontal 6-Pin Connector - SMD

Brand: SparkFun
Here is a six pin horizontal 1.0mm pitch connector. It is useful if you need something very tiny as a connection. These are not the standard JST type connectors we use on most of our boards, but are actually the much smaller JST-SH type. Check the drawing below.
$1.60 AUD, inc GST

JST PH 4-pin Vertical Connector (10-pack) - STEMMA

Brand: Adafruit
Designing boards with plug-n-play connectivity is a snap, with STEMMA connectors. Here's a pack of 10 of Adafruit's favorite 2mm pitch connector - the JST PH 4 pin. These...
$6.65 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.