Search results for: &#039;jst ph 6 pin&#039;

JST 2-pin cable

Red and black tinned wires with a 2-pin JST PH connector on the end. 4" / 100mm long. Matches up nicely with Adafruit's Lipoly charger! Adafruit don't have the 'mating' version...

$1.30 AUD, inc GST

JST PH 2.0mm Pitch Connector Kit - 220 Piece Kit

Totally 220 pieces, this JST-PH Connector Kit is a must-have for your workstation. You'll have enough sockets and plugs to fuel your maker tendencies for days on...

$23.80 AUD, inc GST

JST PH 3-Pin Plug to Male Header Cable - 200mm

This cable will let you turn a JST PH 3-pin cable port into 3 individual wires with high-quality 0.1" male header plugs on the end. Adafruit are carrying these to match...

$2.60 AUD, inc GST

Out of stock

2-Pin Female JST PH-Style Cable (14cm)

This 5.5" (14cm) cable has two 26AWG conductors with a 2mm-pitch 2-pin female JST PH-style connector. The other ends of the wires are unterminated; they can be cut to length to match your application. The red and black wires are twisted together to reduce noise.

$3.20 AUD, inc GST

4-pin JST PH to JST SH Cable - STEMMA to QT / Qwiic - 200mm long

Are you a maker in the midst of a STEMMA dilemma? This 200mm long 4-wire cable is a fantastic chimera-cable fitted with STEMMA QT / Sparkfun Qwiic JST SH on one...

$1.95 AUD, inc GST

JST PH 4-Pin to Female Socket Cable - I2C STEMMA Cable - 200mm

This cable will let you turn a JST PH 4-pin cable port into 3 individual wires with high-quality 0.1" female sockets on the end. Adafruit are carrying these to match up...

$3.20 AUD, inc GST

This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST connector on one end, bare cable on the opposite end. It also comes with the mating connector for the JST.

JST-PH Jumper 2 Wire Assembly

Brand: Sparkfun

$2.20 AUD, inc GST

2.5mm Pitch 6-pin Cable Matching Pair - JST XH compatible

These solid 2.5mm pitch connector cable pairs are great when you need something that can carry a couple amps of current, easy to connect and disconnect, and is just-about 0.1" pitch compatible.

$3.10 AUD, inc GST

3-pin LiPo Battery 4000mAh

Brand: Core Electronics

4000mAh Lithium-Ion battery with an inboard NTC.

$27.40 AUD, inc GST

Makerverse Nano Power Timer HAT for Raspberry Pi Pico

Brand: Makerverse

Periodically cycles power to your battery-powered projects

$12.75 AUD, inc GST

6-Pin Single-Ended Female JST SH-Style Cable 30cm

This 30 cm (12") cable has six 28 AWG wires and a 6-pin female JST SH-type connector that works with our Micro Metal Gearmotor Encoders with top-entry...

$4.95 AUD, inc GST

Available with a lead time

6V Air Valve with 2-pin JST PH Connector - FA0520E

Here's a cool new valve for makers interested in pneumatic systems, hydraulics, inflatables, projects with compressed air, and the like. These air valves, also known by other names like, automatic bleeding valve or air release valve, are typically used to passively release air from a pressurized container.

$6.65 AUD, inc GST

Breakout for JST SH-Style Connector, 6-Pin Male Side-Entry (Individually Packaged)

This simple board serves as an adapter between a JST SH-style 6-pin male connector and breadboard-compatible 0.1"-pitch through holes. It works with our ...

$2.50 AUD, inc GST

6-Pin Single-Ended Female JST SH-Style Cable 12cm

This 12 cm (4.5") cable has six 28 AWG wires and a 6-pin female JST SH-type connector that works with our Micro Metal Gearmotor Encoders with top-entry...

$3.50 AUD, inc GST

Available with a lead time

2.0mm Pitch 5-pin Cable Matching Pair - JST PH Compatible

These solid 2.0mm pitch connector cable pairs are great when you need something that can carry a couple of amps of current and are easy to connect and disconnect.

$2.25 AUD, inc GST

JST SH 1mm Pitch 3 Pin to Socket Headers Cable - 100mm long

If you're fancying to connect to the debug port on a Pico WH, or the two ports on a Pico Debug Probe or anything else with a JST SH compatible 3-pin...

$2.90 AUD, inc GST

JST-PH 2-Pin SMD Connector (Side Entry)

Add a power connector to your SMD PCB designs with this JST-PH 2-pin compatible connector...

$0.26 AUD, inc GST

This is a simple jumper adapter cable that comes pre-terminated with a female JST connector on one end and a breadboard hookup pigtail on the other. This cable makes it easy to connect components with a JST connector to a breadboard or an Arduino-based device’s pins.

JST PH to Breadboard Jumper (3-pin)

Brand: Sparkfun

$2.95 AUD, inc GST

2.0mm Pitch 3-pin Cable Matching Pair - JST PH Compatible

These solid 2.0mm pitch connector cable pairs are great when you need something that can carry a couple of amps of current and are easy to connect and disconnect.

$2.20 AUD, inc GST

JST-PH Jumper 3 Wire Assembly

Brand: Sparkfun

This is a simple three wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST-PH connector on one end, bare cable on the opposite end. It also comes with the mating connector for the JST.

$3.30 AUD, inc GST

JST PH 4-Pin Socket to Color Coded Cable - 200mm

This cable will let you turn a JST PH 4-pin cable socket into 4 individual tinned wires. These are great to match up with Adafruit's JST 4-PH cables, for extending and...

$2.10 AUD, inc GST