Search results for: 'idc header'

50 results

Header Kit for Raspberry Pi Pico

Brand: Core Electronics

Configure your stack of Pico HATs however you want with this header kit!

$2.80 AUD, inc GST

Female Header 2.54mm (2x20)

Brand: Core Electronics
Perfect for prototyping, this straight female header is a commonly used header type so grab a few and put your ideas to the test!
$0.82 AUD, inc GST

2.54mm 1x6-Pin Straight Female Header

Brand: Core Electronics

Do you have a headerless breakout module, custom PCB, or other 2.54mm-pitch connection you need a reliable set of headers for? If so, then these are the kind of headers you're after.

$0.16 AUD, inc GST

2.54mm 1x10-Pin Straight Female Header

Brand: Core Electronics

Got a breakout board, microcontroller, or PCB of your choice you need to breakout ten pins from? If so, here's the run-of-the-mill header solution you're looking for.

$0.27 AUD, inc GST

2.54mm 1x2-Pin Straight Female Header

Brand: Core Electronics

These minature header blocks are perfect for when there are a couple points side-by-side you need to interface to.

$0.11 AUD, inc GST

2.54mm 1x12-Pin Straight Female Header

Brand: Core Electronics

A header for twelve points on a PCB in a row that you want to connect to.

$0.32 AUD, inc GST

2.54mm 1x2-Pin Right Female Header

Brand: Core Electronics

Got two 0.1" seperated points on the edge of a board you need to connect to easily and permanently? In that case, there aren't many more simple options than a female header such as this.

$0.17 AUD, inc GST

2.54mm 1x4-Pin Right Female Header

Brand: Core Electronics

For four pin positions you require a four pin header for, this ought to do the trick.

$0.21 AUD, inc GST

Box IDC header 2x5

Brand: Core Electronics

Commonly used for large SWD or ICSP Programming these box headers are great for your PCB Projects

$0.23 AUD, inc GST

Pico/Pico W Female Header Pack

Brand: Core Electronics

Grab a couple female headers for your Pico or Pico W!

$0.82 AUD, inc GST

Break Away Male Headers - Right Angle

Brand: SparkFun
A row of right angle male headers - break to fit. 40 pins that can be cut to any size. Used with custom PCBs or general custom headers.
$4.40 AUD, inc GST

Break Away Headers - Right Angle 2x40

Brand: SparkFun
This is a 2x40 pin right-angle PTH header. This header can be broken apart with a fair amount of force to form smaller header formations. Don’t worry, it’s easy enough to break it where you need! Each pin has a spacing of 0.1" in between each other.
$4.80 AUD, inc GST

2x5 Pin Shrouded Header

Brand: SparkFun
Simple shrouded 10-pin connector. Good for preventing cable connection mishaps. Use for programming, data, power, or any other kind of connection. 2x5 pins on 0.1" centers.
$2.95 AUD, inc GST

DIN Rail 2x20 IDC to Terminal Block Adapter Breakout

Brand: Adafruit
This one's going out to all the makers and designers who use DIN railing in their builds. This adapter plate is perfect for simplifying complex wiring. You connect...
$34.80 AUD, inc GST

SWD 0.05 Pitch Connector - 10 Pin SMT Box Header

Brand: Adafruit
This 1.27mm pitch, 2x5 male SMT Box Header is the same one used on Adafruit's SWD Cable Breakout Board. The header alone is great if you want to incorporate this piece...
$3.05 AUD, inc GST

Header - 4-pin Male (SMD, 0.1", Right Angle)

Brand: SparkFun
This is a SMD 4-pin right angle male header. We use this header on our Graphic LCD Serial Backpack.
$1.25 AUD, inc GST

Mini SWD 0.05 Pitch Connector - 10 Pin SMT Box Header

Brand: Adafruit
Adafruit have carrying a new 1.27mm pitch 2x5 Mini SWD 0.05" Pitch Connector. It's a tinier, bite-sized version of the Box Header used on Adafruit's SWD Cable Breakout Board. Instead...
$3.45 AUD, inc GST

Box IDC header 2x3

Brand: Core Electronics

Commonly used for programming or general interconnects these box headers are great for your PCB Projects!

$0.23 AUD, inc GST

Shrouded Box Header: 2x3-Pin, 0.100" (2.54 mm) Male

Brand: Pololu
These hard-to-find 6-pin (2×3) shrouded male headers are great general-purpose connectors and are perfect for AVR ISP programming and work with Pololu's 6-pin IDC sockets and 6-conductor ribbon cables with IDC connectors.
$2.50 AUD, inc GST

2x17 (34 pin) IDC Box Header - 0.1" / 2.54mm Pitch

Brand: Adafruit
This handy double-row, 34-pin 2x17 IDC Box Header is a slightly smaller version of the 2x20 pin IDC Box Header, often used for floppy...
$2.05 AUD, inc GST

IDC socket: 2x3-Pin, 0.100" (2.54 mm) Female

Brand: Pololu
IDC socket 2.54mm 6-pin (with strain relief clip) for use with 2×3-pin shrouded male header.
$3.30 AUD, inc GST

Vertical Labelled Headers for Raspberry Pi Pico

Brand: The Pi Hut
The Raspberry Pi Pico is a fun and powerful development board, but the pin labels are printed in tiny letters on the bottom of the board. Since Where Labs...
$8.65 AUD, inc GST

Header - 2x23-pin Male (PTH, 0.1")

Brand: SparkFun
This is a 2x23 pin male PTH header. This piece is in the common configuration for Beaglebone Black headers that can be broken apart to form smaller header formations. Each pin has a spacing of 0.1" in between each other.
$2.20 AUD, inc GST

2.54mm 1x10-Pin Right Female Header

Brand: Core Electronics

If you need ten points connected to on the edge of a board to connect to inline with the surface of the PCB, these headers should do the trick.

$0.43 AUD, inc GST

Break Away Headers - Right Angle 3x40

Brand: SparkFun
Here we have some right-angle headers with 40x3 pins. They are break away and will take a bit of effort to break this beast where you need it to break. That being said, if you need a big header like this, it’s easy enough to break it where you need. The pins are spaced at 0.1" and there are 3 rows of 40 pins.
$10.75 AUD, inc GST

Header - 8-pin Female (PTH, 0.1")

Brand: SparkFun
These are standard 0.1" spaced header pins that can be through-hole mounted. This header connects perfectly with most 8-pin male headers.
$1.35 AUD, inc GST

DIN Rail 2x8 IDC to Terminal Block Adapter Breakout

Brand: Adafruit
This one's going out to all the makers and designers who use DIN railing in their builds. This adapter plate is perfect for simplifying complex wiring. You connect...
$23.80 AUD, inc GST

2x3 Pin Shrouded Header

Brand: SparkFun
Simple shrouded 6-pin connector. Good for preventing cable connection mishaps. Use for programming, data, power, or any other kind of connection. 2x3 pins on 0.1" centers.
$3.10 AUD, inc GST

2.54mm 1x40-Pin Right Male Header

Brand: Core Electronics

A classic 0.1" | 2.54mm pitch 40-pin header row, with right-angle mounting for the edge of your board.

$0.41 AUD, inc GST

Header - 40-pin Male (Long Centered, PTH, 0.1")

Brand: SparkFun
This is a row of 40 break away headers spaced 0.1" apart with long pins on both sides. This header is especially useful when you need to connect a PCB to a solderless breadboard. Each header can be broken apart to your preference to fit custom PCBs or general custom headers.
$2.70 AUD, inc GST

Low Profile 2x20 SMT header

Brand: Core Electronics

A must have for your own low-profile PCB designs!

$1.60 AUD, inc GST

Header - 2x5 Pin (Male, 1.27mm)

Brand: SparkFun
This is a super small, 2x5 pin male PTH header. This header is in the common configuration for JTAG applications. Each pin has a spacing of 1.27mm in between each...
$3.65 AUD, inc GST

GPIO Ribbon Cable 2x8 IDC Cable - 16 pins 12 long

Brand: Adafruit
Connect this to that! If you want to bridge those contacts out onto another PCB, you'll want this GPIO Ribbon Cable! Comes in a classic Adafruit Black, has a nice...
$4.75 AUD, inc GST

Pogo Pins Crown Head (10 pack) - P75-H2

Brand: Adafruit
Pogo pins are little spring-loaded contacts, very handy for making jigs, or making momentary (but electrically solid) contacts. Adafruit use them by the dozen for making...
$8.60 AUD, inc GST

Pogo Pins Spear Head (10 pack) - P75-LM3

Brand: Adafruit
Pogo pins are little spring-loaded contacts, very handy for making jigs, or making momentary (but electrically solid) contacts. Adafruit use them by the dozen for making...
$14.45 AUD, inc GST

IDC Breakout Helper - 2x3 (6 pin)

Brand: Adafruit
This little 2x3 (6 pin - 0.1 spaced) IDC Breadboard Helper is great in conjunction with Adafruit's 6-pin IDC cable. It comes in two parts, a 'pin-through' socket and a...
$1.95 AUD, inc GST

6-Conductor Ribbon Cable with IDC Connectors 12"

Brand: Pololu
This 12" (30 cm), 6-conductor ribbon cable has a female 2×3 IDC connector on each end that is designed to plug into a 0.100" (2.54 mm) 2×3 shrouded box header. It can also be used with 0.100" male header pins.
$6.65 AUD, inc GST

Rainbow 34-pin Dual Row IDC Floppy Ribbon Cable - 30cm long

Brand: Adafruit
Often used for floppy drives, 34 pin IDC cables have a 2x17 array of pins. This cable will let you connect one port to another with a festive rainbow...
$8.20 AUD, inc GST

PiGRRL 2.0 Custom Gamepad PCB

Brand: Adafruit
This is the Custom Gamepad PCB for the PiGRRL 2 pack! The board is designed for use in portable gaming projects like the PiGRRL 2 but it's basically everything-you-need...
$9.85 AUD, inc GST

40-pin FPC to Right Angle 2x20 IDC Female Socket Header

Brand: Adafruit
Here is an easy solution for extending your Raspberry Pi's GPIO capabilities. This is a 40-pin FPC to Right Angle 2x20 IDC Female Socket Header Adapter
$7.10 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.