Search results for: &#039;header pack&#039;

2.54mm 1x4-Pin Straight Female Header

Four header pins in a block for a permanent prototyping connection to your breakouts and PCBs.

$0.16 AUD, inc GST

2.54mm 1x6-Pin Right Female Header

For six pins you need to interface to at a right angle, these headers would be an easy option.

$0.26 AUD, inc GST

2.54mm 1x40-Pin Right Female Header

This long row of headers has you covered when you have an "unconventional" free 40-pins on the edge of your PCB to interface or prototype with.

$1.05 AUD, inc GST

40-Pin 2.54mm Round Male Pin Header

Available with a lead time

Great for low-profile designs or prototyping with DIP IC's.

$1.40 AUD, inc GST

This connector is a single-row, 7-pin, straight female header strip designed to match 0.1" male headers. The order quantity must be a multiple of two.

0.100" (2.54 mm) Female Header: 1x7-Pin, Straight

Brand: Pololu

$1.80 AUD, inc GST

40-Pin 2.54mm Round Female Pin Header

Available with a lead time

Great for low-profile designs or prototyping with DIP IC's.

$0.54 AUD, inc GST

2.54mm 1x3-Pin Straight Female Header

Got some 2.54mm | 0.1" pitch through holes on your PCB you need to connect to? Here's some headers you can use.

$0.11 AUD, inc GST

Slim Header -Male 1x40

If stacking your boards too high is an issue check out this range of low-profile headers!

$0.73 AUD, inc GST

This connector is a single-row, 40-pin, straight male header strip that can be cut or broken into smaller strips. This strip has a yellow plastic base;...

0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Straight, Yellow

Brand: Pololu

$1.75 AUD, inc GST

2.54mm 1x10-Pin Straight Female Header

Got a breakout board, microcontroller, or PCB of your choice you need to breakout ten pins from? If so, here's the run-of-the-mill header solution you're looking for.

$0.27 AUD, inc GST

2.54mm 1x2-Pin Straight Female Header

These minature header blocks are perfect for when there are a couple points side-by-side you need to interface to.

$0.11 AUD, inc GST

These 40-pin 2x20 male GPIO headers can be used on a Raspberry Pi Zero and come in a multi-pack containing all 5 colours! Great for any version of...

Coloured GPIO Headers - 5 Pack

Brand: The Pi Hut

$4.80 AUD, inc GST

A row of right angle headers - break to fit. 40 pins that can be cut to any size. Used with custom PCBs or general custom headers.

40 Pin Break Away Male Header- Right Angle-10 Pcs

Brand: DFRobot

$4.59 AUD, inc GST

This is a super small, 2x5 pin male PTH header. This header is in the common configuration for JTAG applications. Each pin has a spacing of 1.27mm in between each...

Header - 2x5 Pin (Male, 1.27mm)

Brand: SparkFun

$3.65 AUD, inc GST

2.54mm 1x20-Pin Right Female Header

If you've got exactly twenty positions for pins on the edge of your board you want some female headers on to interface with, these headers have you covered.

$0.74 AUD, inc GST

2.54mm 1x8-Pin Right Female Header

Got 8-pins on the edge of your PCB that you need to interface off a right right-angle? If so, this is the header for you.

$0.37 AUD, inc GST

2.54mm 1x2-Pin Right Female Header

Got two 0.1" seperated points on the edge of a board you need to connect to easily and permanently? In that case, there aren't many more simple options than a female header such as this.

$0.17 AUD, inc GST