Search results for: 'teensy stackable header kit'
Teensy Stackable Header Kit (Extended)
Brand: SparkFun
These headers are made to work with the Teensy 4.1, Teensy 3.6, and Teensy 3.5 development boards. Each set of headers allows for your Teensy to be easily incorporated...
$3.45 AUD, inc GST
Ultimate Header Pack
Brand: Core Electronics
A pack of the most commonly used headers!
$11.05 AUD, inc GST
Teensy 4.1 (Headers)
Brand: Teensy
The Teensy 4.1 is the newest iteration of the astoundingly popular development platform that features an ARM Cortex-M7 processor at 600MHz, with a NXP iMXRT1062...
$57.15 AUD, inc GST
2.54mm 1x4-Pin Straight Female Header
Brand: Core Electronics
Four header pins in a block for a permanent prototyping connection to your breakouts and PCBs.
$0.16 AUD, inc GST
Slim Header -Female 1x20
Brand: Core Electronics
If stacking your boards too high is an issue check out this range of low-profile headers!
$0.72 AUD, inc GST
2.54mm 1x2-Pin Straight Female Header
Brand: Core Electronics
These minature header blocks are perfect for when there are a couple points side-by-side you need to interface to.
$0.11 AUD, inc GST
2.54mm 1x12-Pin Straight Female Header
Brand: Core Electronics
A header for twelve points on a PCB in a row that you want to connect to.
$0.32 AUD, inc GST
Short Feather Male Headers - 12-pin and 16-pin Male Header Set
Brand: Adafruit
These two Short Male Headers alone are, well, lonely. But pair them with any of our Feather boards and you're in business! These headers are particularly cute and...
$1.30 AUD, inc GST
Pin headers experimental pack (Seeed Studio)
Brand: Seeed Studio
This pack included 41 units of most commonly used Pin-headers. They are very suitable for your project on breadboard/protoborad, take few back and enjoy...
$19.95 AUD, inc GST
Teensy 3.x Feather Adapter
Brand: Adafruit Feather
Oh man, is this not the best thing ever? You can now use the awesome Teensy 3 with any and all of our FeatherWings or Feather accessories and even get built-in LiPoly...
$13.15 AUD, inc GST
Assembled Adafruit HUZZAH32 – ESP32 Feather Board - with Stacking Headers
Brand: Adafruit
Aww yeah, it's the Feather you have been waiting for, and now with stacking headers! The HUZZAH32 is Adafruit's ESP32-based Feather, made with the official WROOM32 module...
$42.75 AUD, inc GST
Similar matches
Stackable Header Pins 2.54mm (1x20)
Brand: Core Electronics
Perfect for prototyping, the stacking header lets your signal and power flow through your project, grab a few and put your ideas to the test!
$0.96 AUD, inc GST
Header Kit for Raspberry Pi Pico
Brand: Core Electronics
Configure your stack of Pico HATs however you want with this header kit!
$2.80 AUD, inc GST
Teensy 4.0 (Headers)
Brand: SparkFun
Teensy 4.0 features an ARM Cortex-M7 processor at 600MHz, with a NXP iMXRT1062 chip, the fastest microcontroller available today. No soldering required!
$43.50 AUD, inc GST
Female Header 2.54mm (2x20)
Brand: Core Electronics
Perfect for prototyping, this straight female header is a commonly used header type so grab a few and put your ideas to the test!
$0.82 AUD, inc GST
2.54mm 1x8-Pin Straight Female Header
Brand: Core Electronics
This is a 1 × 8 set of 2.54mm | 0.1" separated female headers perfect for small microcontroller breakouts and similar boards to allow easy access to a row of pins
$0.22 AUD, inc GST
Feather Stacking Headers - 12-pin and 16-pin female headers
Brand: Adafruit
These two Female Stacking Headers alone are, well, lonely. But pair them with any of our Feather boards and you're in business! What do they do? They stack. Put...
$2.70 AUD, inc GST
Slim Header -Male 1x40
Brand: Core Electronics
If stacking your boards too high is an issue check out this range of low-profile headers!
$0.73 AUD, inc GST
Slim Header -Female 1x40
Brand: Core Electronics
If stacking your boards too high is an issue check out this range of low-profile headers!
$1.40 AUD, inc GST
2.54mm 1x3-Pin Straight Female Header
Brand: Core Electronics
Got some 2.54mm | 0.1" pitch through holes on your PCB you need to connect to? Here's some headers you can use.
$0.11 AUD, inc GST
2.54mm 1x10-Pin Straight Female Header
Brand: Core Electronics
Got a breakout board, microcontroller, or PCB of your choice you need to breakout ten pins from? If so, here's the run-of-the-mill header solution you're looking for.
$0.27 AUD, inc GST
Stackable 0.100″ Female Header: 2x20-pin, Straight
Brand: Pololu
This stackable 40-pin female header features two rows of 20 pins spaced with a 0.1″ (2.54 mm) pitch. The extended pins allow multiple units to be stacked as popularized on Arduino shields. The 2×20 size is notably used on the Raspberry Pi Models A+ and B+.
$7.90 AUD, inc GST
Low Profile 2x20 SMT header
Brand: Core Electronics
A must have for your own low-profile PCB designs!
$1.60 AUD, inc GST
Slim Header -Male 1x20
Brand: Core Electronics
If stacking your boards too high is an issue check out this range of low-profile headers!
$0.42 AUD, inc GST
Shield stacking headers for Arduino (R3 Compatible)
Brand: Adafruit
“How could something so simple be so useful?” Adafruit heard once that in the 4th millenium B.C. some guy asked the person who invented the wheel that question. The person...
$3.95 AUD, inc GST
Coloured GPIO Headers - 5 Pack
Brand: The Pi Hut
These 40-pin 2x20 male GPIO headers can be used on a Raspberry Pi Zero and come in a multi-pack containing all 5 colours! Great for any version of...
$4.80 AUD, inc GST
2mm Pitch 40-Pin Break-apart Male Headers - Pack of 5
Brand: Adafruit
Never get frustrated with 2mm-pitch modules again! Each one of these 40-pin break-apart header packs contains 5 pieces of 40-pin, 2mm pitch headers. Great for when...
$5.95 AUD, inc GST
0.100" 2x20-pin Strip Right Angle Female Header
Brand: Adafruit
This 2x20-pin strip, right-angle female header is a perfect companion piece to Adafruit's 2x20-pin Dual Male Header. It's a great way to add right-angle capability to a 2x20 pin circuit board either by attaching the right-angle male headers to the board and having a right-angle female header or connecting the female header to Adafruit's 2x20 Dual Male headers.
$3.60 AUD, inc GST
GPIO Stacking Header for Pi A+/B+/Pi 2/Pi 3 - Extra-long 2x20 Pins
Brand: Adafruit
Connect your own PCB to a Raspberry Pi B+ and stack on top with this normal-height female header with extra long pins. The female header part is about 8.5mm tall...
$5.65 AUD, inc GST
Stackable 0.100″ Female Header with Extra 0.3″ Spacer: 2x20-pin, Straight
Brand: Pololu
This extra-tall stackable 40-pin female header features two rows of 20 pins spaced with a 0.1″ (2.54 mm) pitch. It includes three 0.1″-thick spacers for additional clearance, and the extended pins allow multiple units to be stacked as popularized on Arduino shields. The 2×20 size is notably used on the Raspberry Pi Models A+ and B+, and the extra 0.3″ of height allows for stacked boards to clear all of the components on the Raspberry Pi B+.
$11.10 AUD, inc GST
Stackable Header - 8 Pin
Brand: DFRobot
This is an 8-pin female header, with extra long legs -- great for stacking Arduino shields.Pins are spaced by 0.1".
$4.72 AUD, inc GST
Arduino Nano Stackable Header Kit
Brand: SparkFun
These stackable headers are made to work with the SparkFun Qwiic Shield for Arduino Nano or any comparable shield to connect the shield with a Arduino Nano footprint...
$4.60 AUD, inc GST
Feather Header Kit - 12-pin and 16-pin Female Header Set
Brand: Adafruit
These two Female Headers alone are, well, lonely. But pair them with any of our Feather boards and you're in business! What do they do? They get soldered on either...
$2.15 AUD, inc GST
Box IDC header 2x5
Brand: Core Electronics
Commonly used for large SWD or ICSP Programming these box headers are great for your PCB Projects
$0.23 AUD, inc GST
Feather Stackable Header Kit
Brand: SparkFun
These stackable headers are made to work with the SparkFun ESP32 Thing Plus to connect to shield with a Feather footprint.
$4.10 AUD, inc GST
Arduino Stackable Header Kit - R3
Brand: SparkFun
These headers are made to work with the Arduino Uno R3, Leonardo and new Arduino boards going forward. They are the perfect height for clearing the USB-B connector and great for stacking multiple shields. This kit includes 4 headers (2 8-pin, 1 10-pin and 1 6-pin), enough to connect a shield to an Arduino board. These are the same headers we use in our tutorials and with our own shields.
$4.95 AUD, inc GST
Stackable Header - 6 Pin
Brand: DFRobot
This is a 6-pin female header, with extra long legs -- great for stacking Arduino shields.Pins are spaced by 0.1".
$4.69 AUD, inc GST
Female Header Pack
Brand: SparkFun
This pack of female headers includes two 6-pin headers and two 8-pin headers. This is similar to the header kit that comes with Arduino shields except that the pins are shorter so they don’t stack. These are useful for Arduino compatible boards that don’t come with headers already installed (like the Arduino Pro).
$3.90 AUD, inc GST
3x4 Right Angle Male Header - 4 pack
Brand: Adafruit
Three rows in a right angle header!? Yes! These chunks of 0.1" header has yet-another-row - handy for when you want to connect cables that come in sets of three...
$5.70 AUD, inc GST
Arduino Stackable Header - 6 Pin
Brand: SparkFun
This is a 6-pin female header, with extra long legs – great for stacking Arduino shields.
$1.35 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.