Search results for: 'teensy 4.1 headers'
Teensy 4.1 (Headers)
Brand: Teensy
The Teensy 4.1 is the newest iteration of the astoundingly popular development platform that features an ARM Cortex-M7 processor at 600MHz, with a NXP iMXRT1062...
$57.15 AUD, inc GST
Teensy 4.1 without Ethernet (Headers)
Brand: SparkFun
The Teensy 4.1 with Headers features an ARM Cortex-M7 processor at 600MHz, 4x larger flash memory than the 4.0, and optional locations for more memory...
$59.95 AUD, inc GST
Teensy 4.1
Brand: Teensy
The Teensy 4.1 is newest iteration of the astoundingly popular development platform that features an ARM Cortex-M7 processor at 600MHz, with a NXP iMXRT1062 chip...
$52.95 AUD, inc GST
Teensy Audio Adapter Board (Rev D)
Brand: Teensy
This is the Teensy Audio Adapter Board that can be added to a Teensy 4.0 for your next audio project. The shield provides you with an easy-to-use tool to add high...
$16.40 AUD, inc GST
Ethernet Kit for Teensy 4.1
Brand: Teensy
This kit has all the parts needed to connect to the Ethernet port on Teensy 4.1...
$16.10 AUD, inc GST
Teensy Stackable Header Kit (Extended)
Brand: SparkFun
These headers are made to work with the Teensy 4.1, Teensy 3.6, and Teensy 3.5 development boards. Each set of headers allows for your Teensy to be easily incorporated...
$3.45 AUD, inc GST
2x20 Socket Riser Header for Raspberry Pi HATs and Bonnets
Brand: Adafruit
Give yourself a lift with this 2x20 female socket header that has slightly longer than usual pins. You can plug this into your Raspberry Pi GPIO port and then plug...
$3.90 AUD, inc GST
Break Away Headers - Straight
Brand: SparkFun
A row of headers - break to fit. 40 pins that can be cut to any size. Used with custom PCBs or general custom headers.
$3.35 AUD, inc GST
Slim Header -Female 1x20
Brand: Core Electronics
If stacking your boards too high is an issue check out this range of low-profile headers!
$0.72 AUD, inc GST
Slim Header -Male 1x40
Brand: Core Electronics
If stacking your boards too high is an issue check out this range of low-profile headers!
$0.73 AUD, inc GST
Slim Header -Female 1x40
Brand: Core Electronics
If stacking your boards too high is an issue check out this range of low-profile headers!
$1.40 AUD, inc GST
Slim Header -Male 1x20
Brand: Core Electronics
If stacking your boards too high is an issue check out this range of low-profile headers!
$0.42 AUD, inc GST
Short Plug Headers for Raspberry Pi Pico - 2 x 20 Male Headers
Brand: Adafruit
These three Short Plug / Male Headers alone are, well, lonely. But pair them with the Raspberry Pi Pico, and you're in business!These 2.54mm /...
$1.85 AUD, inc GST
Stackable 0.100″ Female Header: 2x20-pin, Straight
Brand: Pololu
This stackable 40-pin female header features two rows of 20 pins spaced with a 0.1″ (2.54 mm) pitch. The extended pins allow multiple units to be stacked as popularized on Arduino shields. The 2×20 size is notably used on the Raspberry Pi Models A+ and B+.
$7.90 AUD, inc GST
Break Away Male Headers - Right Angle
Brand: SparkFun
A row of right angle male headers - break to fit. 40 pins that can be cut to any size. Used with custom PCBs or general custom headers.
$4.40 AUD, inc GST
Break Away Headers - Right Angle 2x40
Brand: SparkFun
This is a 2x40 pin right-angle PTH header. This header can be broken apart with a fair amount of force to form smaller header formations. Don’t worry, it’s easy enough to break it where you need! Each pin has a spacing of 0.1" in between each other.
$4.80 AUD, inc GST
SMT GPIO Header for Raspberry Pi HAT - 2x20 Short Female Header
Brand: Adafruit
For super-slim SMT designs, this custom-made, 2x20 short SMT female header can be used to plug a Raspberry Pi HAT onto a B+ or A+ or Pi 2. It's harder to use than...
$3.60 AUD, inc GST
SparkFun Qwiic Shield for Teensy - Extended
Brand: SparkFun
The SparkFun Extended Qwiic Shield for Teensy provides you with a quick and easy way to enter into SparkFun's Qwiic ecosystem with your Teensy boards. This shield...
$8.50 AUD, inc GST
36-pin 0.1 Short Female Header - Pack of 5
Brand: Adafruit
In this world nothing can be said to be certain, except Adafruit need headers, headers, and more headers! Each pack contains five 36-pin short female headers, 0.1" pitch...
$14.50 AUD, inc GST
SmartMatrix SmartLED Shield for Teensy 4
Brand: Adafruit
So you have a fresh and fancy Teensy 4 and an RGB LED Matrix Panel and you want an easy way to add graphics to your matrix without having to toss aside your Teensy or do too much soldering. Enter the SmartMatrix SmartLED Shield for Teensy 4!
$51.70 AUD, inc GST
Similar matches
Ultimate Header Pack
Brand: Core Electronics
A pack of the most commonly used headers!
$11.05 AUD, inc GST
Teensy 4.0 (Headers)
Brand: SparkFun
Teensy 4.0 features an ARM Cortex-M7 processor at 600MHz, with a NXP iMXRT1062 chip, the fastest microcontroller available today. No soldering required!
$43.50 AUD, inc GST
Teensy 4.0
Brand: Teensy
Teensy 4.0 is the latest Teensy, offering the fastest microcontroller and powerful peripherals in the Teensy 1.4 by 0.7 inch form factor. It features an ARM Cortex-M7...
$40.15 AUD, inc GST
Female Header 2.54mm (2x20)
Brand: Core Electronics
Perfect for prototyping, this straight female header is a commonly used header type so grab a few and put your ideas to the test!
$0.82 AUD, inc GST
Header Kit for Raspberry Pi Pico
Brand: Core Electronics
Configure your stack of Pico HATs however you want with this header kit!
$2.80 AUD, inc GST
2.54mm 1x4-Pin Straight Female Header
Brand: Core Electronics
Four header pins in a block for a permanent prototyping connection to your breakouts and PCBs.
$0.16 AUD, inc GST
2.54mm 1x8-Pin Straight Female Header
Brand: Core Electronics
This is a 1 × 8 set of 2.54mm | 0.1" separated female headers perfect for small microcontroller breakouts and similar boards to allow easy access to a row of pins
$0.22 AUD, inc GST
2.54mm 1x3-Pin Straight Female Header
Brand: Core Electronics
Got some 2.54mm | 0.1" pitch through holes on your PCB you need to connect to? Here's some headers you can use.
$0.11 AUD, inc GST
2.54mm 1x2-Pin Straight Female Header
Brand: Core Electronics
These minature header blocks are perfect for when there are a couple points side-by-side you need to interface to.
$0.11 AUD, inc GST
Stacking Header for Pi A+/B+/Pi 2/Pi 3 - 2x20 Extra Tall Header
Brand: Adafruit
Stack multiple plates, breakouts etc onto your Raspberry Pi Model B+ with this custom-made extra-tall and extra-long 2x20 female header. The female header part has...
$6.30 AUD, inc GST
Low Profile 2x20 SMT header
Brand: Core Electronics
A must have for your own low-profile PCB designs!
$1.60 AUD, inc GST
2.54mm 1x12-Pin Straight Female Header
Brand: Core Electronics
A header for twelve points on a PCB in a row that you want to connect to.
$0.32 AUD, inc GST
2.54mm 1x4-Pin Right Female Header
Brand: Core Electronics
For four pin positions you require a four pin header for, this ought to do the trick.
$0.21 AUD, inc GST
Teensy 4.1 without Ethernet
Brand: Teensy
The Teensy 4.1 features an ARM Cortex-M7 processor at 600MHz, four times larger flash memory than the 4.0, and optional locations for more memory...
$56.95 AUD, inc GST
Pico/Pico W Female Header Pack
Brand: Core Electronics
Grab a couple female headers for your Pico or Pico W!
$0.82 AUD, inc GST
Stackable 0.100″ Female Header with Extra 0.3″ Spacer: 2x20-pin, Straight
Brand: Pololu
This extra-tall stackable 40-pin female header features two rows of 20 pins spaced with a 0.1″ (2.54 mm) pitch. It includes three 0.1″-thick spacers for additional clearance, and the extended pins allow multiple units to be stacked as popularized on Arduino shields. The 2×20 size is notably used on the Raspberry Pi Models A+ and B+, and the extra 0.3″ of height allows for stacked boards to clear all of the components on the Raspberry Pi B+.
$11.10 AUD, inc GST
3x4 Right Angle Male Header - 4 pack
Brand: Adafruit
Three rows in a right angle header!? Yes! These chunks of 0.1" header has yet-another-row - handy for when you want to connect cables that come in sets of three...
$5.70 AUD, inc GST
Feather Stackable Header Kit
Brand: SparkFun
These stackable headers are made to work with the SparkFun ESP32 Thing Plus to connect to shield with a Feather footprint.
$4.10 AUD, inc GST
Right-Angled Labelled Headers for Raspberry Pi Pico
Brand: The Pi Hut
The Raspberry Pi Pico is a fun and powerful development board, but the pin labels are printed in tiny letters on the bottom of the board. Since Where Labs...
$8.60 AUD, inc GST
Female Header Pack
Brand: SparkFun
This pack of female headers includes two 6-pin headers and two 8-pin headers. This is similar to the header kit that comes with Arduino shields except that the pins are shorter so they don’t stack. These are useful for Arduino compatible boards that don’t come with headers already installed (like the Arduino Pro).
$3.90 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.