Search results for: 'gpio header'

Perfect for prototyping, the straight male header is a super common header type so grab a few and put your ideas to the test!

If your soldering isn't quite up to scratch, or you just don't own a soldering iron yet, then these nifty hammer headers form Pimoroni might be just what you need...

Give yourself a lift with this 2x20 female socket header that has slightly longer than usual pins. You can plug this into your Raspberry Pi GPIO port and then plug...

This 2x20 “tall” header has the same number and spacing of pins as a Raspberry Pi and provides your board with the ability to extend the heights of your GPIO to...

Connect your own PCB to a Raspberry Pi with this normal-height female header. The female header part is about 8.5mm tall, good for small HATs that do not to clear...

If you already own the GPIO Hammer Headers Jig and just want some more headers, then these are the headers you are after.

This 2x20 shrouded header has the same number and spacing of pins as the Raspberry Pi B+ so you can easily connect via ribbon cable to the low-level peripherals and get hacking! This through-hole header has 40 0.1"-spaced pins and is keyed for polarity.

If you already own the GPIO Hammer Headers Jig and just want some more headers, then these are the headers you are after.

These 40-pin 2x20 male GPIO headers can be used on a Raspberry Pi Zero and come in a multi-pack containing all 5 colours! Great for any version of...

Connect your own PCB to a Raspberry Pi B+ and stack on top with this normal-height female header with extra long pins. The female header part is about 8.5mm tall...

Here's a snazzy accessory for your Raspberry Pi Zero or Zero W, a color-coded 2x20 header! This Color Coded Header takes the mystery out of your Raspberry Pi's 2x20...

These three Short Plug / Male Headers alone are, well, lonely. But pair them with the Raspberry Pi Pico, and you're in business!These 2.54mm /...

Stack multiple plates, breakouts etc onto your Raspberry Pi Model B+ with this custom-made extra-tall and extra-long 2x20 female header. The female header part has...

For super-slim SMT designs, this custom-made, 2x20 short SMT female header can be used to plug a Raspberry Pi HAT onto a B+ or A+ or Pi 2. It's harder to use than...

This 0.1mm pitch 2x2 Female Header is the perfect boost to use with boards that use the 4-pin 'PoE' header on the Raspberry Pi 3 and 4, like the Raspberry Pi PoE HAT! It's a great pairing to the 2x20 socket riser header to get a full lift.

This stackable 40-pin female header features two rows of 20 pins spaced with a 0.1″ (2.54 mm) pitch. The extended pins allow multiple units to be stacked as popularized on Arduino shields. The 2×20 size is notably used on the Raspberry Pi Models A+ and B+.

This extra-tall stackable 40-pin female header features two rows of 20 pins spaced with a 0.1″ (2.54 mm) pitch. It includes three 0.1″-thick spacers for additional clearance, and the extended pins allow multiple units to be stacked as popularized on Arduino shields. The 2×20 size is notably used on the Raspberry Pi Models A+ and B+, and the extra 0.3″ of height allows for stacked boards to clear all of the components on the Raspberry Pi B+.

This is an 8-pin female header, with extra long legs -- great for stacking Arduino shields.Pins are spaced by 0.1".

This is a super small, 2x5 pin male PTH header. This header is in the common configuration for JTAG applications. Each pin has a spacing of 1.27mm in between each...

This connector is a single-row, 16-pin, straight female header strip designed to match 0.1" male headers.

This 'shorty' 2x20 header is great for a slim connection to your Raspberry Pi model A+ or B+, it's basically the through-hole version of the SMT GPIO Header for...

This 2x20 pin female header is meant to allow you to extend the reach of any board with the standard 2x20 GPIO pin footprint like the Raspberry Pi, Google Coral...

The Raspberry Pi Pico is a fun and powerful development board, but the pin labels are printed in tiny letters on the bottom of the board. Since Where Labs...

This stackable 38-pin female header features two rows of 19 pins spaced with a 0.1" (2.54 mm) pitch. The extended pins allow multiple units to be stacked...

This is a simple 2x3 male PTH header. This header is in the common configuration for an ISP connector. Each pin has a spacing of 0.1" in between each other.

These hard-to-find 6-pin (2×3) shrouded male headers are great general-purpose connectors and are perfect for AVR ISP programming and work with Pololu's 6-pin IDC sockets and 6-conductor ribbon cables with IDC connectors.

Simple shrouded 10-pin connector. Good for preventing cable connection mishaps. Use for programming, data, power, or any other kind of connection. 2x5 pins on 0.1" centers.

These headers are made to work with the Arduino Uno R3, Leonardo and new Arduino boards going forward. They are the perfect height for clearing the USB-B connector and great for stacking multiple shields. This kit includes 4 headers (2 8-pin, 1 10-pin and 1 6-pin), enough to connect a shield to an Arduino board. These are the same headers we use in our tutorials and with our own shields.

These headers are made to work with the Arduino Main Board, Arduino Pro, and the Arduino Mega. They are the perfect height for clearing the USB-B connector and great for stacking multiple shields. This kit includes 4 headers (2 8-pin and 2 6-pin), enough to connect a shield to an Arduino Main Board. These are the same headers we use in our tutorials and with our own shields.

These stackable headers are made to work with the SparkFun ESP32 Thing Plus to connect to shield with a Feather footprint.

Connect your own PCB to a Raspberry Pi with this extra-tall female header. The female header part has extra spaces to make it 13.6mm tall: when placed on your Pi...

Connect your own PCB to a Raspberry Pi B+ with this extra-tall female header. The female header part has extra spaces to make it 16.5mm tall: when placed on your...

If your soldering isn't quite up to scratch, or you just don't own a soldering iron yet, then these nifty hammer headers from Pimoroni might be...

The Raspberry Pi Pico is a fun and powerful development board, but the pin labels are printed in tiny letters on the bottom of the board. Since Where Labs...

This is a 2x23 pin male PTH header. This piece is in the common configuration for Beaglebone Black headers that can be broken apart to form smaller header formations. Each pin has a spacing of 0.1" in between each other.

These are standard 0.1" spaced header pins that can be surface mounted for applications where through-hole pins won’t work. The surface mount side of the legs are staggered for stress relief.

This is a SMD 4-pin right angle male header. We use this header on our Graphic LCD Serial Backpack.