Search results for: 'battery terminal'

50 results

Battery Holder - 1x18650 (wire leads)

Brand: SparkFun
This is an incredibly simple one cell 18650 Battery Holder. When someone thinks of 18650 Cells they tend to think of flashlights first, which is fair since that is what they have been primarily used for. However, with this battery holder you will gain the ability to incorporate 18650 cells into applications like robotics or prototyping by simply dropping one into this device and attaching the leads, that’s it.
$2.65 AUD, inc GST

9V Battery Clip

Brand: Core Electronics
Standard 9V Battery Clip with leads.
$0.46 AUD, inc GST

Battery Holder - 2x18650 (wire leads)

Brand: SparkFun
This is an incredibly simple two cell 18650 Battery Holder. When someone thinks of 18650 Cells they tend to think of flashlights first, which is fair since that is what they have been primarily used for. However, with this battery holder you will gain the ability to incorporate 18650 cells into applications like robotics or prototyping by simply dropping one into this device and attaching the leads, that’s it.
$3.60 AUD, inc GST

4-AA Battery Holder

Brand: Pololu
Battery holder for four AA batteries.
$5.65 AUD, inc GST

9V Battery Clip to 2.1mm Barrel Jack Adapter

Brand: Core Electronics
This adapter consists of a 9V battery clip and a standard 5.5*2.1mm center positive barrel jack, it applied to power any device needs 9V input voltage...
$0.76 AUD, inc GST

3-AA Battery Holder

Brand: Pololu
Battery holder for three AA cells.
$3.60 AUD, inc GST

3-AAA Battery Holder, Enclosed with Switch

Brand: Pololu
Enclosed battery holder for three AAA cells. This holder features a lid that slides over the batteries and snaps into place to fully enclose them. It also features a switch that lets you open and close the electrical connection between the batteries and the holder’s leads.
$8.70 AUD, inc GST

4-AA Battery Holder, Back-to-Back

Brand: Pololu
Battery holder for four AA cells arranged as two back-to-back two-cell holders.
$5.20 AUD, inc GST

2-AAA Battery Holder

Brand: Pololu
Battery holder for two AAA cells.
$2.80 AUD, inc GST

9V Battery Holder

Brand: SparkFun
This 9V battery holder allows your battery to snap in tight and holds it in place, which is great in situations where you don’t want the battery just hanging. It also has three mounting holes so you can attach it securely to your enclosure.
$7.35 AUD, inc GST

2xAAA Battery Holder with JST-PH Connector

Brand: Kitronik
2xAAA Battery Cage with JST connector. Supplied with 145mm colour coded leads. Perfect as a power supply to the BBC micro:bit.
$1.90 AUD, inc GST

3-AAA Battery Holder

Brand: Pololu
Battery holder for three AAA cells.
$4.75 AUD, inc GST

2-AA Battery Holder

Brand: Pololu
Battery holder for two AA cells.
$5.20 AUD, inc GST

4 x AA Battery Holder with 2.1mm Plug

Brand: Adafruit
Here's another addition to Adafruit's growing family of AA battery holders. A holder for four (4) AA batteries! It's got an 8" long power cable with a 2.1mm DC jack at...
$6.90 AUD, inc GST

2 x AAA Battery Holder with On/Off Switch & JST PH Connector

Brand: Adafruit
This battery holder connects 2 AAA batteries together in series for powering all kinds of projects. Adafruit spec'd these out because the box is nicely slim, and 2 AAA's...
$4.65 AUD, inc GST

2 x AA Battery Holder with Premium Jumper Header Wires

Brand: Adafruit
Adafruit have got battery holders for all sorts of needs and projects! Waterproof? Here ya go. With an on/off switch? Easy peasy. Here's Adafruit's latest addition in classy Adafruit...
$4.15 AUD, inc GST

4-AAA Battery Holder

Brand: Pololu
Battery holder for 4 AAA cells.
$4.25 AUD, inc GST

Coin Cell Battery Holder - 12mm (SMD)

Brand: SparkFun
This is the SMD version of PRT-07948, which is the unit we like to use as RTC backup and SRAM backup for GPS units. Holds battery in place with friction. The metal housing connects to the positive side of the battery and the PCB pad underneath is connected to the negative side.
$1.40 AUD, inc GST

9V Snap Connector

Brand: SparkFun
Classic 9V connector terminated with 2-pin polarized Molex connector. 5" in length.
$3.20 AUD, inc GST

9V battery clip with 5.5mm/2.1mm plug

Brand: Adafruit
I found these high-quality battery clips. They're molded plastic so they wont tear like cheap clips, and they cover the battery terminals to prevent shorts. Comes...
$5.95 AUD, inc GST

3-C Battery Holder

Brand: Pololu
Battery holder for three C cells.
$11.10 AUD, inc GST

Battery Holder 3xAA with Cover and Switch - JST Connector

Brand: SparkFun
This 3xAA battery holder with JST connector puts a nice finishing touch on your battery powered project...
$5.10 AUD, inc GST

Battery Holder - 4xAA to Barrel Jack Connector

Brand: SparkFun
This is a simple 4 cell AA battery holder. The 5 inch cable is terminated with a standard 5.5x2.1mm, center positive barrel jack connector.
$5.40 AUD, inc GST

3x AA Battery box (JST-PH, Switch)

Brand: Core Electronics

Conveniently power your projects with this sleek, quality battery box!

$1.80 AUD, inc GST

2x AA Battery box (JST-PH, Switch)

Brand: Core Electronics

Conveniently power your projects with this sleek, quality battery box!

$1.60 AUD, inc GST

4x AA Battery box (JST-PH, Switch)

Brand: Core Electronics

Conveniently power your projects with this sleek, quality battery box!

$2.80 AUD, inc GST

Single CR2032 / 20mm Coin Cell Battery Holder with Switch

Brand: Adafruit
This tiny coin cell battery holder is ideal for small portable or wearable projects. It holds one 20mm coin cell (also known as CR2032) in series to generate 3V nominal. 20mm coin cells are popular as they are used in keychain lights and remotes, so they are easy to get and fairly low cost. They tend to have about 220mAh capacity.
$2.10 AUD, inc GST

18650 Battery Holder (Through Hole tabs)

Brand: Core Electronics
Gracefully hold 18650 batteries with these durable ABS holders.
$2.25 AUD, inc GST

JST-PH Battery Extension Cable - 500mm

Brand: Adafruit
By popular demand, Adafruit now have a handy extension cord for all of Adafruit's JST-terminated battery packs (such as Adafruit's LiIon/LiPoly and 3xAAA holders). One end has a JST-PH...
$3.80 AUD, inc GST

2-Way 18650 Battery Holder

Brand: DFRobot
This easy-to-use 16850 battery holder with dual-slot offers micro and type-C charging inputs, five 5V/2A output ports, five 3.3V/1A output ports and one...
$20.33 AUD, inc GST

2 x 18650 Battery Holder with DC2.1 Power Jack

Brand: DFRobot
The 18650 lithium battery is a commonly used lithium battery in electronic products. It is often used in batteries of laptop computers and power banks. 18650, which...
$3.40 AUD, inc GST

3 x 18650 Battery Holder with DC2.1 Power Jack

Brand: DFRobot
The 18650 lithium battery is a commonly used lithium battery in electronic products. It is often used in batteries of laptop computers and power banks. 18650, which...
$4.40 AUD, inc GST

4 x AA Battery Holder with On/Off Switch

Brand: Adafruit
Make a nice portable power pack with this 4 x AA battery holder. It fits any alkaline or rechargeable AA batteries in series. There's a snap on cover and an on/off...
$7.70 AUD, inc GST

Battery Holder 3xAA with Cover and Switch

Brand: SparkFun
This 3xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable, sliding cover, which is secured with a small phillips head screw. Another bonus is the ON/OFF switch which can be used to control power to your project.
$5.90 AUD, inc GST

3x AA Battery Box (micro-USB, Switch)

Brand: Core Electronics

Conveniently power up your Pico or micro:bit using their micro-USB input

$4.50 AUD, inc GST

18650 Battery Holder (Surface Mount Tabs)

Brand: Core Electronics

Cradle your 18650 batteries with these ABS holders

$1.85 AUD, inc GST

9V battery holder with switch & 5.5mm/2.1mm plug

Brand: Adafruit
This is a 9V battery pack with on/off switch and a pre-attached 5.5mm/2.1mm center-positive barrel plug. Use this to battery-power your Arduino (or other electronic...
$8.75 AUD, inc GST

4×AA Battery Holder (with Power Switch, DC2.1 Jack, and Cover)

Brand: DFRobot
This battery holder can hold 4 AA batteries and comes with a DC 2.1 jack that offers a simpler and more secure wire connection...
$3.83 AUD, inc GST

3 x AAA Battery Holder with On/Off Switch and 2-Pin JST-PH

Brand: Adafruit
This battery holder connects 3 AAA batteries together in series for powering all kinds of projects. Adafruit spec'd these out because the box is slim, and 3 AAA's add...
$5.40 AUD, inc GST

Battery Holder 4xAA with Cover and Switch

Brand: SparkFun
This 4xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable, sliding cover, which is secured with a small phillips head screw. Another bonus is the ON/OFF switch which can be used to control power to your project.
$5.40 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.