Search results for: 'battery connector wire'

The nested form-factor of this 12V battery allows it to be tucked away in an 1120 Series U-Channel to protect it from the moving pieces of your chassis.

Adafruit have got battery holders for all sorts of needs and projects! Waterproof? Here ya go. With an on/off switch? Easy peasy. Here's Adafruit's latest addition in classy Adafruit...

This 6V battery contains five 3000mAh sub-C cells wired in series. The high strand silicone wire has a built-in mini-blade fuse holder...

This XT30 lead consists of 300mm length, 16AWG, bonded wire that is terminated in an XT30 (MH-FC) connector on one end and bare wires on...

This 100mm length servo lead has a TJC8 Servo Connector on one end and bare wires on the other so that it can be inserted into screw.....

This inverter is the most common way to power EL wire because they tend to be cheap and batteries generally last a long time.

This female JST RCY plug, also called a BEC connector, has 10 cm 20-AWG leads with stripped and tinned terminations. The connector is keyed so that power cannot be reversed.

The SparkFun JST battery removal tool is a tool to remove a standard 2-pin JST-PH connector (2mm pitch) from its housing! Use the JST battery removal tool...

The SparkFun Pro RF is a LoRa®-enabled wireless board that marries a SAMD21 and a long-range RFM95W to make a compact and easy-to-use IoT Arduino board. With its...

This JST RCY plug is also referred to as a BEC (battery eliminator circuit) connector and is commonly used with battery packs for RC applications. The connector is keyed so that power cannot be reversed. You can use a crimping tool to attach these connectors to your own 22- to 28-AWG wires. This pack contains enough housings and crimp pins (including two spare pins) for 3 male connectors.

This style of high-current connector is commonly used with the 7.2V sub-C battery packs that power many RC cars. The connector is keyed so that power cannot be reversed, and a latch secures the connection so that it will not become disconnected. You can use a crimping tool to attach these connectors to your own 14- to 20-AWG wires. This pack contains enough housings and crimp pins (including two spare pins) for 3 female connectors.

This male JST RCY plug, also called a BEC connector, has 10 cm 20-AWG leads with stripped and tinned terminations. The connector is keyed so that power cannot be reversed.

This is a 2-pin, through-hole PH series JST connector. The pins are spaced by 2mm.

This JST RCY plug is also referred to as a BEC (battery eliminator circuit) connector and is commonly used with battery packs for RC applications. The connector is keyed so that power cannot be reversed. You can use a crimping tool to attach these connectors to your own 22- to 28-AWG wires. This pack contains enough housings and crimp pins (including two spare pins) for 3 female connectors.

This 300mm length servo lead has a TJC8 Servo Connector on one end and bare wires on the other end so that it can be inserted into screw.....

Learn the basics of programming, coding, and electronics including current, voltage, and digital logic. No prior knowledge or experience is necessary as the kit guides you through step by step.

This style of high-current connector is commonly used with the 7.2V sub-C battery packs that power many RC cars. The connector is keyed so that power cannot be reversed, and a latch secures the connection so that it will not become disconnected. You can use a crimping tool to attach these connectors to your own 14- to 20-AWG wires. This pack contains enough housings and crimp pins (including two spare pins) for 3 male connectors.

This Lithium Polymer Ion based battery is a slim, lightweight battery that is perfect for a portable project! LIPO chemistry is the highest energy density chemistry around and due to that, you get nominal 3.7V at 6000mAh!

This 4-wire cable is a little over 150mm / 6" long and fitted with JST-PH female 4-pin connectors on each end. These types of JST cables are commonly found on small...

This pocket inverter can power 3 meters of EL wire for 10 hours! with three different power modes (steady/blinking/off). Comes with JST connector and removable clip. (Batteries not included)

Everything you need to create fun, engaging, and relevant STEAM lessons for high school students.

When you need a portable 12V power pack, this big holder will do the job! The holder will store 8 AA batteries end to end, to give approximately 12VDC output with...

This 300mm length servo lead has a TJC8 Servo Connector on one end and bare wires on the other so that it can be inserted into screw.....

This pack contains everything you need to add up to three female JR connectors — the connectors commonly found on generic RC servos — to custom cables. You can use a crimping tool to attach the included pins to your own 22–26 AWG wires. This pack contains enough housings and crimp pins (including 3 spare pins) for 3 female connectors. The crimp pins have gold-flashed female contacts.

Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable...

This style of high-current connector is commonly used with the 7.2V battery packs that power many RC cars. The connector is keyed so that power cannot be reversed, and a latch secures the connection so that it will not become disconnected. This male Tamiya connector has 10cm 14-AWG leads with stripped and tinned terminations.

This XT30 lead consists of 300mm length, 16AWG, bonded wire that is terminated in an XT30 (FH-MC) connector on one end and bare wires on...

This 150mm length servo lead has a TJC8 Servo Connector on one end and bare wires on the other end so it can be inserted into screw.....

This Lithium Polymer Ion based battery is a slim, lightweight battery that is perfect for a portable project! LIPO chemistry is the highest energy density chemistry around and due to that, you get nominal 3.7V at 4400mAh!

This 300mm length XT90 extension is a plug-n-play solution for connecting components with XT90 connectors—such as a battery dock to a motor.....

This style of high-current connector is commonly used with the 7.2V sub-C battery packs that power many RC cars. The connector is keyed so that power cannot be reversed, and a latch secures the connection so that it will not become disconnected. This female Tamiya connector has 10cm 14-AWG leads with stripped and tinned terminations.

This pack contains everything you need to add up to three female Futaba J connectors — the connectors found on many Futaba servos — to custom cables. You can use a crimping tool to attach the included pins to your own 22–26 AWG wires. This pack contains enough housings and crimp pins (including 3 spare pins) for 3 female connectors. The crimp pins have gold-flashed female contacts.

The MCP motor controllers from Basicmicro (formerly Ion Motion Control) can control a pair of brushed DC motors using USB serial, TTL serial, RS-232...

These solid 2.5mm pitch connector cable pairs are great when you need something that can carry a couple amps of current, easy to connect and disconnect, and is just-about 0.1" pitch compatible.

Polymer Lithium Ion batteries offer superior energy density with this 400mAh battery being only 6mm in height!

Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! Adafruit designed Feather to be a new standard for portable...