Search results for: '6 pin connector cable'

This simple board serves as an adapter between a JST SH-style 6-pin male connector and breadboard-compatible 0.1"-pitch through holes. It works with our ...

This simple board serves as an adapter between a JST SH-style 6-pin male connector and breadboard-compatible 0.1"-pitch through holes. It works with our ...

This cable is a little over 100mm / 4" long and fitted with JST-GH compatible 6-pin connectors on either end. We dig the solid and compact nature of...

Secure your project with biometrics - this adorably tiny, all-in-one, optical fingerprint sensor will make adding fingerprint detection and verification super simple. It's extremely slim, with a plastic casing that can be glued or panel mounted into any enclosure! There are some embedded blue LEDs that light up the outer casing when the sensor is waiting for finger touches.

This 6-conductor, 75 cm (30") cable has 24 AWG wires and a 6-pin female JST PH-type connector (2mm pitch) on one end. The other ends of the wires are...

These 2x3 crimp connectors can be snapped onto 6-wire ribbon cable to make your own cable assemblies and keep your connections organized. Simply press the connector onto your ribbon cable, no soldering required, which makes it easy to add as many mid-cable connectors as you need.

These solid 2.5mm pitch connector cable pairs are great when you need something that can carry a couple amps of current, easy to connect and disconnect, and is just-about 0.1" pitch compatible.

With this handy 7 Pin Mini-DIN Connector you can now jack into the hackport on your iRobot and control it with an Arduino or some other favorite microcontroller...

This is a jumper adapter cable that comes pre-terminated with a 6-pin JST-SH connector on one end and a breadboard hookup pigtail on the other...

When 0.1" is too big, and JST PH's too chunky, this ultra-slim 1.25mm connector cable is a reliable alternative. These are 1.25mm pitch but have...

Connect this to that with an IDC cable! This cable has 10 pins (2x5) in 0.1"x0.1" spacing. Often used for programming AVRs. 6" long with two sockets crimped onto...

This simple board serves as an adapter between a JST PH-style 6-pin, top-entry connector and breadboard-compatible 0.1"-pitch through holes. The PH...

These solid 2.0mm pitch connector cable pairs are great when you need something that can carry a couple of amps of current and are easy to connect and disconnect.

1.25mm Pitch 6-pin Cable Matching Pair - 10 cm long - Molex PicoBlade Compatible

Connect this to that with an IDC cable! This cable has 6 pins (2x3) in 0.1"x0.1" spacing. Often used for programming AVRs. 6" long with two sockets crimped onto...

That new Raspberry Pi 400 computer you just got has a row of 2x20 pin headers on the right side - those are the GPIO (general purpose input/output) pins, and for those of Adafruit who like to hack electronics, they are where the real fun lies

These 6-wire cables are 162mm (6.4") long and come as a set. One cable has a JST SM type connector plug on the end. The other cable has a matching JST SM type receptacle...

This is a simple six wire cable. Great for jumping from board to board or just about anything else. There is a 6-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.

This 6-conductor, 10 cm (4") cable has 24 AWG wires and 6-pin female JST PH-type connectors (2mm pitch) on both ends...

This panel mount cable is great for making USB Type C connections with a panel-mount setup. On the small panel-mount side you get a USB C connector, the...

This 12" (30 cm), 6-conductor ribbon cable has a female 2×3 IDC connector on each end that is designed to plug into a 0.100" (2.54 mm) 2×3 shrouded box header. It can also be used with 0.100" male header pins.

This simple board serves as an adapter between a JST SH-style 6-pin male connector and breadboard-compatible 0.1"-pitch through holes. It works with our ...

Connect TinyFX devices easily with these 2-pin JST-SUR cables, perfect for linking expansion boards and mono LED strips in 15cm lengths - includes 6 black cables per pack.

This simple board serves as an adapter between a JST SH-style 6-pin male connector and breadboard-compatible 0.1"-pitch through holes. It works with our ...

This is a 6-pin JST-ZHR cable that's terminated on the end with breadboard compatible Dupont connectors. The six male pins that terminate one side of the cable feature...

Here is a six pin horizontal 1.0mm pitch connector. It is useful if you need something very tiny as a connection. These are not the standard JST type connectors we use on most of our boards, but are actually the much smaller JST-SH type. Check the drawing below.

This 4-wire cable is a little over 150mm / 6" long and fitted with JST-PH female 4-pin connectors on each end. These types of JST cables are commonly found on small...

This 12 cm (4.5") cable has six 28 AWG wires and a 6-pin female JST SH-type connector that works with our Micro Metal Gearmotor Encoders with top-entry...

You might have seen these cables used in computers. They are typically used to bring USB connections from a motherboard to the external case, or the rear expansion slots. They have a 0.1" spaced 4-pin header on one end and a USB A connector on the other.

This is a handy cable for connecting a six pin GHR-06V type locking connector to breadboard friendly male pins. The six male pins that terminate one side of the...

USB To UART/I2C/SPI/JTAG Converter, Supports Multiple Interfaces, Compatible with 3.3V and 5V, Multiple Protection Circuits, Multiple Systems Support,...

Connect your TinyFX expansion boards and mono LED strips with these reliable 2-pin JST-SUR cables, available in 5cm and 15cm lengths for flexible installation options.

The Pogo Pin Probe Clip with 6 pins in a 2.54 / 0.1" pitch spacing is a great way to test and connect with pin-point accuracy without soldering!...

This 30 cm (12") cable has six 28 AWG wires and a 6-pin female JST SH-type connector that works with our Micro Metal Gearmotor Encoders with top-entry...

This is a 150mm (~6") long, 10-conductor cable that's especially ideal for many JTAG applications. Both ends are terminated with 2x5 pin female connectors with 1.27mm...

This 75 cm (30") cable has six 28 AWG wires and a 6-pin female JST SH-type connector that works with our Micro Metal Gearmotor Encoders with top-entry...

This 63 cm (25") cable has six 28 AWG wires and 6-pin female JST SH-type connectors on both ends. These connectors work with our Micro Metal Gearmotor ...

This is a USB AVR programmer supported by offical Arduino IDE. Once the Arduino has lost its bootloader for some reasons, use this programmer to reburn the bootloader and save the dead Arduino.

This is a USB 2.0 type B to Mini-B 5-pin black cable. You know, the mini-B connector that usually comes with USB Hubs, Cameras, MP3 players, etc. We specifically like these 6" long cables because using USB peripherals in projects within a small enclosure is much easier these days, and most times you really don’t need six feet of cable to do that. You can still use this USB cable with our SparkFun RedBoards, FTDI Basics, ProtoSnap, or anything else that utilizes a Mini-B connector type!

This 40 cm (16") cable has six 28 AWG wires and 6-pin female JST SH-type connectors on both ends. These connectors work with our Micro Metal Gearmotor ...