Search results for: '2x20 female header'

50 results

Female Header 2.54mm (2x20)

Brand: Core Electronics
Perfect for prototyping, this straight female header is a commonly used header type so grab a few and put your ideas to the test!
$0.82 AUD, inc GST

GPIO Header for Raspberry Pi - 2x20 Female Header

Brand: Adafruit
Connect your own PCB to a Raspberry Pi with this normal-height female header. The female header part is about 8.5mm tall, good for small HATs that do not to clear...
$2.95 AUD, inc GST

0.100" (2.54 mm) Female Header: 2x20-Pin, Straight

Brand: Pololu
This connector is a double-row, 40-pin (2×20), straight female header strip designed to match 0.1" male headers.
$6.75 AUD, inc GST

0.100" 2x20-pin Strip Right Angle Female Header

Brand: Adafruit
This 2x20-pin strip, right-angle female header is a perfect companion piece to Adafruit's 2x20-pin Dual Male Header. It's a great way to add right-angle capability to a 2x20 pin circuit board either by attaching the right-angle male headers to the board and having a right-angle female header or connecting the female header to Adafruit's 2x20 Dual Male headers.
$3.60 AUD, inc GST

Stackable 0.100″ Female Header: 2x20-pin, Straight

Brand: Pololu
This stackable 40-pin female header features two rows of 20 pins spaced with a 0.1″ (2.54 mm) pitch. The extended pins allow multiple units to be stacked as popularized on Arduino shields. The 2×20 size is notably used on the Raspberry Pi Models A+ and B+.
$7.90 AUD, inc GST

Stackable 0.100″ Female Header with Extra 0.3″ Spacer: 2x20-pin, Straight

Brand: Pololu
This extra-tall stackable 40-pin female header features two rows of 20 pins spaced with a 0.1″ (2.54 mm) pitch. It includes three 0.1″-thick spacers for additional clearance, and the extended pins allow multiple units to be stacked as popularized on Arduino shields. The 2×20 size is notably used on the Raspberry Pi Models A+ and B+, and the extra 0.3″ of height allows for stacked boards to clear all of the components on the Raspberry Pi B+.
$11.10 AUD, inc GST

GPIO Header for Raspberry Pi HAT - 2x20 Short Female Header

Brand: Adafruit
This 'shorty' 2x20 header is great for a slim connection to your Raspberry Pi model A+ or B+, it's basically the through-hole version of the SMT GPIO Header for...
$4.05 AUD, inc GST

SMT GPIO Header for Raspberry Pi HAT - 2x20 Short Female Header

Brand: Adafruit
For super-slim SMT designs, this custom-made, 2x20 short SMT female header can be used to plug a Raspberry Pi HAT onto a B+ or A+ or Pi 2. It's harder to use than...
$3.60 AUD, inc GST

Extended GPIO Female Header - 2x20 Pin (13.5mm/9.80mm)

Brand: Sparkfun
This 2x20 pin female header is meant to allow you to extend the reach of any board with the standard 2x20 GPIO pin footprint like the Raspberry Pi, Google Coral...
$5.80 AUD, inc GST

GPIO Header for RaspberryPi A+/B+/Pi 2/Pi 3 - Tall 2x20 Female Header

Brand: Adafruit
Connect your own PCB to a Raspberry Pi B+ with this extra-tall female header. The female header part has extra spaces to make it 16.5mm tall: when placed on your...
$6.25 AUD, inc GST

Makerverse Protoboard for Raspberry Pi

Brand: Makerverse
Breaks out and labels every GPIO to a convenient prototyping board.
$6.95 AUD, inc GST

40 Pin GPIO Extension Cable for any 2x20 Pin Raspberry Pi - 150mm / 6 long

Brand: Adafruit
That new Raspberry Pi 400 computer you just got has a row of 2x20 pin headers on the right side - those are the GPIO (general purpose input/output) pins, and for those of Adafruit who like to hack electronics, they are where the real fun lies
$8.10 AUD, inc GST

Current/Voltage/Power Monitor HAT for Raspberry Pi (4 Channel)

Brand: Waveshare
4-channel current, voltage and power monitoring HAT for Raspberry Pi with I2C interface and 0–26V range.
$30.90 AUD, inc GST

Pico/Pico W Female Header Pack

Brand: Core Electronics

Grab a couple female headers for your Pico or Pico W!

$0.82 AUD, inc GST

Raspberry Pi Hat Hardware Kit

Brand: Sparkfun
Effortlessly mount any standard Pi HAT onto your Raspberry Pi 3, 4, or 5, even with a bulky cooling fan or heat sink installed. This harware kit provides...
$18.30 AUD, inc GST

GPIO Ribbon Cable for Raspberry Pi Model A+/B+/Pi 2/Pi 3/ Pi 4 - (40 pins)

Brand: Adafruit
That new Raspberry Pi® Model B+ computer you just got has a row of 2x20 pin headers soldered on - those are the GPIO (general purpose input/output) pins and for...
$7.60 AUD, inc GST

40-pin FPC to Right Angle 2x20 IDC Female Socket Header

Brand: Adafruit
Here is an easy solution for extending your Raspberry Pi's GPIO capabilities. This is a 40-pin FPC to Right Angle 2x20 IDC Female Socket Header Adapter
$7.10 AUD, inc GST

40-pin FPC to Straight 2x20 IDC Female Socket Header

Brand: Adafruit
Here is an easy solution for extending your Raspberry Pi's GPIO capabilities. This is a 40-pin FPC to Straight 2x20 IDC Female Socket Header Adapter
$6.95 AUD, inc GST

Adafruit RGB Matrix HAT + RTC for Raspberry Pi - Mini Kit

Brand: Adafruit
You can now create a dazzling display with your Raspberry Pi Model A+/B+/Pi 2, 3, or 4 with the Adafruit RGB Matrix HAT. This HAT plugs into your Pi and makes it...
$48.15 AUD, inc GST

Pimoroni Mote pHAT

Brand: Pimoroni
Mote pHAT lets you run Pimoroni's beautiful Mote lights straight from your Pi or Pi Zero, for a super-compact setup. Connect up to 4 Mote light strips, with Pimoroni's Mote cables, to the 4 channels provided and away you go! That's up to 64 pixels.
$13.70 AUD, inc GST
Similar matches

Female Header Pins 2.54mm (1x20)

Brand: Core Electronics

Perfect for prototyping, these straight female headers are a super common header type so grab a few and put your ideas to the test!

$0.41 AUD, inc GST

2x20 Socket Riser Header for Raspberry Pi HATs and Bonnets

Brand: Adafruit
Give yourself a lift with this 2x20 female socket header that has slightly longer than usual pins. You can plug this into your Raspberry Pi GPIO port and then plug...
$3.90 AUD, inc GST

Slim Header -Female 1x20

Brand: Core Electronics

If stacking your boards too high is an issue check out this range of low-profile headers!

$0.72 AUD, inc GST

2.54mm 1x8-Pin Straight Female Header

Brand: Core Electronics

This is a 1 × 8 set of 2.54mm | 0.1" separated female headers perfect for small microcontroller breakouts and similar boards to allow easy access to a row of pins

$0.22 AUD, inc GST

2.54mm 1x4-Pin Straight Female Header

Brand: Core Electronics

Four header pins in a block for a permanent prototyping connection to your breakouts and PCBs.

$0.16 AUD, inc GST

Slim Header -Female 1x40

Brand: Core Electronics

If stacking your boards too high is an issue check out this range of low-profile headers!

$1.40 AUD, inc GST

2.54mm 1x40-Pin Right Female Header

Brand: Core Electronics

This long row of headers has you covered when you have an "unconventional" free 40-pins on the edge of your PCB to interface or prototype with.

$1.05 AUD, inc GST

2.54mm 1x3-Pin Straight Female Header

Brand: Core Electronics

Got some 2.54mm | 0.1" pitch through holes on your PCB you need to connect to? Here's some headers you can use.

$0.11 AUD, inc GST

2.54mm 1x6-Pin Straight Female Header

Brand: Core Electronics

Do you have a headerless breakout module, custom PCB, or other 2.54mm-pitch connection you need a reliable set of headers for? If so, then these are the kind of headers you're after.

$0.16 AUD, inc GST

Slim Header -Male 1x40

Brand: Core Electronics

If stacking your boards too high is an issue check out this range of low-profile headers!

$0.73 AUD, inc GST

2.54mm 1x2-Pin Straight Female Header

Brand: Core Electronics

These minature header blocks are perfect for when there are a couple points side-by-side you need to interface to.

$0.11 AUD, inc GST

0.100" (2.54 mm) Female Header: 1x7-Pin, Straight

Brand: Pololu
This connector is a single-row, 7-pin, straight female header strip designed to match 0.1" male headers. The order quantity must be a multiple of two.
$1.80 AUD, inc GST

Stacking Header for Pi A+/B+/Pi 2/Pi 3 - 2x20 Extra Tall Header

Brand: Adafruit
Stack multiple plates, breakouts etc onto your Raspberry Pi Model B+ with this custom-made extra-tall and extra-long 2x20 female header. The female header part has...
$6.30 AUD, inc GST

2.54mm 1x20-Pin Right Female Header

Brand: Core Electronics

If you've got exactly twenty positions for pins on the edge of your board you want some female headers on to interface with, these headers have you covered.

$0.74 AUD, inc GST

GPIO Stacking Header for Pi A+/B+/Pi 2/Pi 3 - Extra-long 2x20 Pins

Brand: Adafruit
Connect your own PCB to a Raspberry Pi B+ and stack on top with this normal-height female header with extra long pins. The female header part is about 8.5mm tall...
$5.65 AUD, inc GST

2.54mm 1x2-Pin Right Female Header

Brand: Core Electronics

Got two 0.1" seperated points on the edge of a board you need to connect to easily and permanently? In that case, there aren't many more simple options than a female header such as this.

$0.17 AUD, inc GST

2.54mm 1x12-Pin Straight Female Header

Brand: Core Electronics

A header for twelve points on a PCB in a row that you want to connect to.

$0.32 AUD, inc GST

2.54mm 1x8-Pin Right Female Header

Brand: Core Electronics

Got 8-pins on the edge of your PCB that you need to interface off a right right-angle? If so, this is the header for you.

$0.37 AUD, inc GST

2.54mm 1x3-Pin Right Female Header

Brand: Core Electronics

Need a simple three pin connection parallel to your board? There are not many easier options than a female header such as this.

$0.16 AUD, inc GST

2.54mm 1x10-Pin Straight Female Header

Brand: Core Electronics

Got a breakout board, microcontroller, or PCB of your choice you need to breakout ten pins from? If so, here's the run-of-the-mill header solution you're looking for.

$0.27 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.