Search results for: 'gpio riser'
Raspberry Pi Extra-Long Stacking Header (2x20 pins)
Brand: Core Electronics
Need another HAT on top of the stack? Grab one of these stacking headers!
$1.95 AUD, inc GST
Raspberry Pi Dual-Access GPIO Extension Board
Brand: The Pi Hut
Enhance your Raspberry Pi projects with this dual-access GPIO extension board, featuring both vertical and horizontal pin headers for flexible GPIO access on all 40-pin Raspberry Pi models including Pi 5, 4, and Zero.
$11.95 AUD, inc GST
2x20 Socket Riser Header for Raspberry Pi HATs and Bonnets
Brand: Adafruit
Give yourself a lift with this 2x20 female socket header that has slightly longer than usual pins. You can plug this into your Raspberry Pi GPIO port and then plug...
$3.90 AUD, inc GST
Stacking Header for Pi A+/B+/Pi 2/Pi 3 - 2x20 Extra Tall Header
Brand: Adafruit
Stack multiple plates, breakouts etc onto your Raspberry Pi Model B+ with this custom-made extra-tall and extra-long 2x20 female header. The female header part has...
$6.30 AUD, inc GST
GPIO Female Socket Riser Header - 2x2 4-pin
Brand: Adafruit
This 0.1mm pitch 2x2 Female Header is the perfect boost to use with boards that use the 4-pin 'PoE' header on the Raspberry Pi 3 and 4, like the Raspberry Pi PoE HAT! It's a great pairing to the 2x20 socket riser header to get a full lift.
$1.05 AUD, inc GST
Raspberry Pi GPIO Tall Header - 2x20
Brand: Sparkfun
This 2x20 “tall” header has the same number and spacing of pins as a Raspberry Pi and provides your board with the ability to extend the heights of your GPIO to...
$5.95 AUD, inc GST
GPIO Stacking Header for Pi A+/B+/Pi 2/Pi 3 - Extra-long 2x20 Pins
Brand: Adafruit
Connect your own PCB to a Raspberry Pi B+ and stack on top with this normal-height female header with extra long pins. The female header part is about 8.5mm tall...
$5.65 AUD, inc GST
Assembled Pi T-Cobbler Plus - GPIO Breakout
Brand: Adafruit
This is the assembled version of the Pi T-Cobbler Plus. This cobbler will break out your Pi's GPIO pins, with a labelled circuit board making prototyping easy like it should be.
$17.10 AUD, inc GST
Extended GPIO Female Header - 2x20 Pin (13.5mm/9.80mm)
Brand: Sparkfun
This 2x20 pin female header is meant to allow you to extend the reach of any board with the standard 2x20 GPIO pin footprint like the Raspberry Pi, Google Coral...
$5.80 AUD, inc GST
40-pin FPC to Straight 2x20 IDC Female Socket Header
Brand: Adafruit
Here is an easy solution for extending your Raspberry Pi's GPIO capabilities. This is a 40-pin FPC to Straight 2x20 IDC Female Socket Header Adapter
$6.95 AUD, inc GST
GPIO Header for Raspberry Pi - Extra tall 2x13 Female Header
Brand: Adafruit
Connect your own PCB to a Raspberry Pi with this extra-tall female header. The female header part has extra spaces to make it 13.6mm tall: when placed on your Pi...
$3.40 AUD, inc GST
GPIO Header for RaspberryPi A+/B+/Pi 2/Pi 3 - Tall 2x20 Female Header
Brand: Adafruit
Connect your own PCB to a Raspberry Pi B+ with this extra-tall female header. The female header part has extra spaces to make it 16.5mm tall: when placed on your...
$6.25 AUD, inc GST
40-pin FPC to Straight 2x20 IDC Male Plug Header
Brand: Adafruit
Here is an easy solution for extending your Raspberry Pi's GPIO capabilities. This is a 40-pin FPC to Straight 2x20 IDC Male Plug Header Adapter
$6.20 AUD, inc GST
Stackable Header - 2x23 Pin Female
Brand: Sparkfun
This is a 2x23 pin female PTH header, with extra long legs which makes great for stacking. This piece is in the common configuration for Beaglebone Black headers. Each pin has a spacing of 0.1" in between each other.
$5.70 AUD, inc GST
Raspberry Pi GPIO 40-Pin Ribbon Cable
Brand: Core Electronics
Extend your Raspberry Pi's functionality with this rainbow ribbon cable!
$3.70 AUD, inc GST
40-pin Raspberry Pi GPIO Breakout
Brand: Core Electronics
If you're after a quick and easy to way to connect external circuitry up to your Raspberry Pi, then look no further! This breakout board has a form factor perfect for connecting to breadboards using the included 40-pin ribbon cable.
$5.65 AUD, inc GST
GPIO Hammer Headers - Solderless Raspberry Pi Connectors - Male + Female + Installation Jig
Brand: Pimoroni
If your soldering isn't quite up to scratch, or you just don't own a soldering iron yet, then these nifty hammer headers form Pimoroni might be just what you need...
$16.95 AUD, inc GST
Adafruit MCP23017 I2C GPIO Expander Breakout - STEMMA QT / Qwiic
Brand: Adafruit
We’ve gotten a lot of requests for a MCP23017 breakout and we’ve always sorta been like “ehh why not just use the DIP chip?” but...
$11.25 AUD, inc GST
Raspberry Pi Model B - GPIO Shrouded Header (2x20)
Brand: Sparkfun
This 2x20 shrouded header has the same number and spacing of pins as the Raspberry Pi B+ so you can easily connect via ribbon cable to the low-level peripherals and get hacking! This through-hole header has 40 0.1"-spaced pins and is keyed for polarity.
$1.80 AUD, inc GST
GPIO Header for Raspberry Pi - 2x20 Female Header
Brand: Adafruit
Connect your own PCB to a Raspberry Pi with this normal-height female header. The female header part is about 8.5mm tall, good for small HATs that do not to clear...
$2.95 AUD, inc GST
Raspberry Pi B - GPIO Ribbon Cable (40-pin, 150mm)
Brand: Sparkfun
This 2x20 flat ribbon-cable fits the GPIO headers on the Raspberry Pi B+ so you can easily connect to the low-level peripherals and get hacking! This cable has 0.1"-spaced connectors and is keyed for polarity.
$9.15 AUD, inc GST
40pin GPIO Reference Board
Brand: Core Electronics
This slice of PCB is a one-to-one reference for the Raspberry Pi GPIO. If you're prototyping, this can save you a lot of hassle by helping prevent wiring problems. It's designed to slip over the GPIO header and give you a label right next to each pin.
$0.33 AUD, inc GST
GPIO Multi-Function Expansion Board (Pi 4B/3B/3B+)
Brand: Core Electronics
This handy HAT sits right on the top of your Pi, and will break out the 40-Pin header on your Raspberry Pi 3B, 3B+ and 4B into 3 banks of pins, and adjacent pins to these connect to screwless spring terminals on the outside of the board.
$6.10 AUD, inc GST
SMT GPIO Header for Raspberry Pi HAT - 2x20 Short Female Header
Brand: Adafruit
For super-slim SMT designs, this custom-made, 2x20 short SMT female header can be used to plug a Raspberry Pi HAT onto a B+ or A+ or Pi 2. It's harder to use than...
$3.60 AUD, inc GST
SparkFun Qwiic GPIO
Brand: Sparkfun
Do you find yourself wishing that you had just a few more GPIO pins? What if you only need that one more pin? You could add another microcontroller to your project...
$11.70 AUD, inc GST
Zooz Z-Wave GPIO HAT Hub
Z-Wave Hub HAT for Pi/Home Assistant, add a low form-factor Z-wave connection to your Smart Home system.
$41.95 AUD, inc GST
Stackable 0.100″ Female Header with Extra 0.3″ Spacer: 2x20-pin, Straight
Brand: Pololu
This extra-tall stackable 40-pin female header features two rows of 20 pins spaced with a 0.1″ (2.54 mm) pitch. It includes three 0.1″-thick spacers for additional clearance, and the extended pins allow multiple units to be stacked as popularized on Arduino shields. The 2×20 size is notably used on the Raspberry Pi Models A+ and B+, and the extra 0.3″ of height allows for stacked boards to clear all of the components on the Raspberry Pi B+.
$11.10 AUD, inc GST
Gravity: Expansion Board for Raspberry Pi Pico
Brand: DFRobot
This Gravity Expansion Board, specifically designed for Raspberry Pi Pico, is compatible with a variety of Gravity sensors and modules, offering...
$9.65 AUD, inc GST
Terminal GPIO Expansion for Pico
Brand: The Pi Hut
This one is for all the makers and designers who want to use terminal blocks with the Pico's GPIO. The Terminal GPIO Expansion allows you to use both...
$22.80 AUD, inc GST
GPIO Header for Raspberry Pi HAT - 2x20 Short Female Header
Brand: Adafruit
This 'shorty' 2x20 header is great for a slim connection to your Raspberry Pi model A+ or B+, it's basically the through-hole version of the SMT GPIO Header for...
$4.05 AUD, inc GST
Coloured GPIO Headers - 5 Pack
Brand: The Pi Hut
These 40-pin 2x20 male GPIO headers can be used on a Raspberry Pi Zero and come in a multi-pack containing all 5 colours! Great for any version of...
$4.80 AUD, inc GST
Similar matches
GPIO Hammer Headers - Male
Brand: Pimoroni
If you already own the GPIO Hammer Headers Jig and just want some more headers, then these are the headers you are after.
$3.95 AUD, inc GST
Gravity: MCP23017 IIC 16 Digital IO Expansion Module
Brand: DFRobot
This is an IO expansion module that based on the chip MCP23017. The module can expand additional 16 IOs. It can set 8 IIC addresses, which means with this module...
$10.10 AUD, inc GST
GPIO Hammer Headers - Female
Brand: Pimoroni
If you already own the GPIO Hammer Headers Jig and just want some more headers, then these are the headers you are after.
$6.10 AUD, inc GST
Stackable Header - 8 Pin
Brand: DFRobot
This is an 8-pin female header, with extra long legs -- great for stacking Arduino shields.Pins are spaced by 0.1".
$4.70 AUD, inc GST
Fan Controller for Raspberry Pi - Horizontal
Brand: The Pi Hut
This is a small board with a load switch that allows a Raspberry Pi to automatically temperature control a fan (not included) via GPIO3. It's an...
$9.60 AUD, inc GST
Gravity: CH423 I2C 24 Digital IO Expansion Module
Brand: DFRobot
This CH423 IO expansion board extends 24 digital ports via I2C, including 8 GPIOs with interrupt functions and 16 GPOs...
$8.60 AUD, inc GST
4Tronix PiStep2 Quad Stepper Motor Control Board for Raspberry Pi
Brand: 4tronix
This neat little board plugs directly into the Raspberry Pi GPIO header and provides 2 or 4 connectors for small stepper motors
$21.80 AUD, inc GST
Pololu RC Switch with Digital Output
Brand: Pololu
This RC switch converts hobby radio control pulses to digital on/off signals for use in RC switch and simple RC adapter applications. One output indicates the presence of a valid RC signal, and the other indicates whether the switch is active. The activation threshold and direction are configurable, and a safe-start feature reduces the likelihood of unexpected activation.
$12.60 AUD, inc GST
Adafruit STSPIN220 Stepper Motor Driver Breakout Board
Brand: Adafruit
Stepper motors are used for CNC machines, 3D printers, and whenever else one needs precise, powerful motion. But to get good behavior from steppers, you...
$11.70 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.