Search results for: '1x5 pin header'

These five-pin housings work with Pololu's wires with pre-crimped terminals to let you quickly make custom cables that mate with various 0.1"-spaced connectors, including male or female headers and solderless breadboards. They are sold in packs of 10.

This connector is a single-row, 5-pin, right-angle female header strip designed to match 0.1" male headers. The order quantity must be a multiple of two.

This connector is a single-row, 5-pin, straight female header strip designed to match 0.1" male headers. The order quantity must be a multiple of two.

These jumper cables are exactly what you need to connect common 0.1" header devices together. Sure you can tape together individual 1x1 header ...

An all-singing, all-dancing time of flight distance sensor that uses PEW PEW LASERS (low-powered ones), our VL53L1X breakout is easy to use with Raspberry Pi or Arduino alike!

A really nice environmental sensor that's ideal for indoor monitoring of temperature, pressure, and humidity, or even outdoors in a suitable enclosure. It's Raspberry Pi and Arduino-compatible.

The state-of-the-art BME680 breakout lets you measure temperature, pressure, humidity, and indoor air quality, and is Raspberry Pi and Arduino-compatible!

An H-bridge DC motor driver with configurable current limit (0.2 or 1A) and up to four different I2C addresses. Great for DIY robot builds.

The MAX30105 breakout is a sophisticated heart rate, oximeter, and smoke/particle sensor. Use it as a fun way to see your heartbeat, or to make LEDs or lights pulse in time with your heart.

An ultra-low-power ( ~100 nA), highly accurate real-time clock breakout. The RV3028 RTC breakout is perfect for adding timekeeping to your project and, thanks to the tiny on-board battery, it'll keep time when your device is powered off. Like all the best timepieces, it's Swiss-made!

Oh boy, this is a Big. Damn. Switch. Program it to switch loads up to 40V / 10A connected to the HT0740 breakout's sturdy screw terminals, and use up to...

A crisp, bright 1.12" OLED that's ideal for adding a small display to your project. Raspberry Pi and Arduino-compatible, this 128x128 pixel, monochrome white/black display is ideal for graphing, readouts, and displaying basic icons.

Detect fourteen distinct channels of light (from 380 nm to 1000 nm) with this versatile spectral sensor...

A fast and precise environmental sensor that can measure temperature, pressure, and altitude. Our BMP280 breakout is Raspberry-Pi and Arduino-compatible.

A simple 3 Degrees of Freedom accelerometer breakout that measures acceleration in three axes - X, Y, and Z. If you need simple and reliable motion detection for your project, then this is a great choice!

A crisp, bright 1.12" OLED that's ideal for adding a small display to your project. Raspberry Pi and Arduino-compatible, this 128x128 pixel, monochrome white/black display is ideal for graphing, readouts, and displaying basic icons

This simple board breaks out all five pins of a USB Mini-B connector to a 0.1″ pin spacing that is compatible with standard perfboards, solderless breadboards, and 0.1" connectors.

This light and proximity sensor detects light over a wide dynamic range (0.01 lux to 64,000 lux) and proximity within a short range of ~5cm. Read more...

Add a colourful light-up dial and spin your Raspberry Pi project right round!

This tiny breakout board for TI’s DRV8838 motor driver can deliver a continuous 1.7 A (1.8 A peak) to a single brushed DC motor. With an operating voltage range from 0 V to 11 V and built-in protection against reverse-voltage, under-voltage, over-current, and over-temperature, this driver is a great solution for powering a small, low-voltage motor. The carrier board has the form factor of a 10-pin DIP package, which makes it easy to use with standard solderless breadboards and 0.1″ perfboards.

Add oodles of extra analog-friendly input and output pins to your Raspberry Pi project!

Add a colourful light-up dial and turn your Raspberry Pi project up to 11!

This compact module packs three IR LED/phototransistor pairs onto a 1.25″ × 0.3″ board. The sensors are mounted on a 0.375″ pitch, making this array a great minimal sensing solution for a line-following robot. Each sensor provides a separate analog voltage output.

A true carbon dioxide sensor that can detect CO2 levels between 400 and 5,000 ppm, mounted on a Breakout Garden and Qw/ST-compatible breakout. SCD41 is...

The MinIMU-9 v6 is an inertial measurement unit (IMU) that packs an LSM6DSO 3-axis gyro and 3-axis accelerometer and an LIS3MDL 3-axis magnetometer onto a...

These shrouded, 5-pin JST XH-style male connectors have extended right-angle leads. They can be used with female JST XH-style connectors, and they also work with other many other 0.1″-pitch female connectors, such as Pololu's female premium jumper wires. They are sold in packs of two units.

This compact breakout board for Maxim’s MAX14870 motor driver offers a wide operating voltage range of 4.5 V to 36 V and can deliver a continuous 1.7 A...

This connector is a single-row, 9-pin, right-angle female header strip designed to match 0.1" male headers. The order quantity must be a multiple of two.

This connector is a single-row, 8-pin, straight female header strip designed to match 0.1" male headers. The order quantity must be a multiple of two.

This connector is a single-row, 3-pin, straight female header strip designed to match 0.1" male headers. The order quantity must be a multiple of five.

This connector is a single-row, 4-pin, right-angle female header strip designed to match 0.1" male headers. The order quantity must be a multiple of two.

This connector is a single-row, 3-pin, right-angle female header strip designed to match 0.1" male headers. The order quantity must be a multiple of five.

This connector is a single-row, 2-pin, right-angle female header strip designed to match 0.1" male headers. The order quantity must be a multiple of five.

This connector is a single-row, 8-pin, right-angle female header strip designed to match 0.1" male headers. The order quantity must be a multiple of two.

This connector is a single-row, 6-pin, right-angle female header strip designed to match 0.1" male headers. The order quantity must be a multiple of two.

This connector is a single-row, 7-pin, straight female header strip designed to match 0.1" male headers. The order quantity must be a multiple of two.

This connector is a single-row, 9-pin, straight female header strip designed to match 0.1" male headers. The order quantity must be a multiple of two.

This connector is a single-row, 2-pin, straight female header strip designed to match 0.1" male headers. The order quantity must be a multiple of five.

This connector is a single-row, 7-pin, right-angle female header strip designed to match 0.1" male headers. The order quantity must be a multiple of two.

This connector is a single-row, 6-pin, straight female header strip designed to match 0.1" male headers. The order quantity must be a multiple of two.