BeaglePlay
Available with a lead time
Expect dispatch between May 15 and May 20
Quantity Discounts:
- 5+ $190.45 (exc GST)
Restrictions apply to this equipment as it uses button/coin cell batteries:
- The equipment is intended to be used in trades, professions or industries
- The equipment is not intended for sale to the general public
- The equipment is not intended to be used where children are present
- You are aware that this equipment may not meet child safety testing requirements as it is not intended to be used by consumers or general public, but rather, is intended to be used in trades, professions or industries in conjunction with the limitations and restrictions listed above
- You are aware that these restrictions are due to a change in Australian legislation in 2022 for button/coin cell batteries
A declaration of use will need to be submitted during checkout.
BeaglePlay is an open-source single board computer designed to simplify the process of adding sensors, actuators, indicators, human interfaces, and connectivity to a reliable embedded system. It features a powerful 64-bit, quad-core processor and innovative connectivity options, including WiFi, Gigabit Ethernet, sub-GHz wireless, and single-pair Ethernet with power-over-data-line. With compatibility with 1,000s of off-the-shelf add-ons and a customized Debian Linux image, BeaglePlay makes expansion and customization easy. It also includes ribbon-cable connections for cameras and touch-screen displays, and a socket for a battery-backed real-time-clock, making it ideal for human-machine interface designs.
BeaglePlay is built around Texas Instruments AM62x Sitara™ Processors which is a Quad-Core Arm® Cortex®-A53 Human-machine-interaction SoC. It comes with 2GB DDR4 RAM, 16GB eMMC storage, Full size HDMI, USB-A host port, USB-C power & connectivity port, serial debug interface, and much more.
Features
- Processor: TI AM6254 (multicore A53s with R5, M4s and PRUs)
- PMIC: TPS6521901
- Memory: 2GB DDR4
- Storage: 16GB eMMC
- WiFi:
- PHY: WL1807MOD (roadmap to next-gen TI CC33XX WiFi 6 & BLE)
- Antennas: 2.4GHz & 5GHz
- BLE/SubG:
- CC1352P7 M4+M0 with BeagleConnect firmware
- BeagleConnect Wireless enabled
- Antennas: 2.4GHz & SubG IEEE802.15.4 software defined radio (SDR)
- Ethernet:
- PHY: Realtek RTL8211F-VD-CG Gigabit Ethernet phy
- Connector: integrated magnetics RJ-45
- Single-pair Ethernet:
- BeagleConnect Wired enabled
- PHY: DP83TD510E 10Mbit 10BASE-T1L single-pair Ethernet phy
- Connector: RJ-11 jack
- Power (PoDL): Input: N/A (protection to 12V), Output: 5V @ 250mA
- USB type-C:
- PD/CC: None, HS shorted to both sides
- Power: Input: 5V @ 3A, Output: N/A (USB-C DRP Not supported)
- HDMI:
- Transmitter: IT66121
- Connector: full-size
- Other Connectors:
- microSD
- USB 2.0 type-A (480Mbit)
- mikroBUS connector (I2C/UART/SPI/MCAN/MCASP/PWM/GPIO)
- Grove connector (I2C/UART/ADC/PWM/GPIO)
- QWIIC connector (I2C)
- CSI connector compatible with BeagleBone AI-64, Raspberry Pi Zero / CM4 (22-pin)
- OLDI connector (40-pin)
Documents
Exact shipping can be calculated on the view cart page (no login required).
Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).
We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):
- $3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
- $6+ for Standard Post (typically 6+ business days, tracked)
- $10+ for Express Post (typically 2+ business days, tracked)
- Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.
Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.
Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.
International Orders - the following rates are for New Zealand and will vary for other countries:
- $11+ for Pack and Track (3+ days, tracked)
- $16+ for Express International (2-5 days, tracked)
If you order lots of gear, the postage amount will increase based on the weight of your order.
Our physical address (here's a PDF which includes other key business details):
Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia
Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.
Have a product question? We're here to help!
Guides
The Maker Revolution
Projects
Analogue Quad Oscillator Drone Synth
Raspberry Pi Microscope
Accurate IoT Clock With ESP8266
Makers love reviews as much as you do, please follow this link to review the products you have purchased.
Product Comments