Wearable projects require careful power management because of weight and size restrictions and multiple battery options are available to get your next running.

per page

11 Items

Set Ascending Direction
  1. Polymer Lithium Ion Battery (LiPo) 3.7V 1100mAh
    Rating:
    99% of 100
    SKU: CE04377 Brand: Core Electronics Guides (1)
    Rely on the superior chemistry and energy density of Lithium Ion batteries for your next portable project. This battery has a capacity of 1100mAh and connects to your circuit by the attached JST connector.
    - +

    248 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Delivered by Aug 16th
  2. Polymer Lithium Ion Battery (LiPo) 3.7V 120mAh
    Rating:
    99% of 100
    SKU: CE04374 Brand: Core Electronics Guides (1)
    Welcome to the awesomeness that is LiPo batteries. Polymer Lithium Ion batteries offer superior energy density with this 120mAh battery being only 5mm in height!
    - +

    202 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Delivered by Aug 17th
  3. Coin Cell Battery - 20mm (CR2032) [Bulk, Minimum of 5 Units]
    Rating:
    100% of 100
    SKU: CE00276 Brand: Core Electronics Guides (1)
    CR2032 Lithium metal 3V 250mAh button cell battery. Great for powering low power processors or blink an LED for weeks at a time.
    - +

    0 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Available with 4 to 6 day lead time
  4. Alligator Clip Wire / Cable 10 Pack
    Rating:
    100% of 100
    SKU: 019-ZY-810
    Great for prototyping and interfacing with devices. 5 colors per pack, 2 of each color (10 total leads).
    - +

    82 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Delivered by Aug 17th
  5. Coin Cell Battery Holder - 20mm (Sewable)
    Rating:
    100% of 100
    SKU: DEV-08822 Brand: Sparkfun
    This is a coin cell holder for the common CR2032 type battery. The holder has a neat pop-in, pop-out feature that makes changing the battery easy. The feet of the holder have a small hole that allow it to be sewn without modification.
    - +

    7 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Delivered by Aug 17th
  6. LilyPad Coin Cell Battery Holder - Switched - 20mm
    Rating:
    100% of 100
    SKU: DEV-13883 Brand: Sparkfun
    Sure, your flashing, chip-tune playing T-shirt is really cool at the party… but at some point you need to turn it off. And yes, you could just pull the battery, or maybe you’ve even sewn a LilyPad slide switch in-line. Wouldn’t it be nice if there was just a switch on the battery? Well, look no further.
    - +

    0 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Available with 4 to 7 day lead time
  7. Coin Cell Battery Holder - 2xCR2032 (Enclosed)
    SKU: PRT-12618 Brand: Sparkfun
    This is a simple coin cell battery holder that can enclose two CR2032 batteries inside itself, and kept closed via two phillips head screws. Each battery holder will run batteries in series, output up to 6V, and is equipped with an On/Off slide switch and two 6" power wires (one positive and one negative) on the back.
    - +

    12 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Delivered by Aug 17th
  8. 3 x AAA Battery Holder with On/Off Switch and 2-Pin JST-PH
    Rating:
    84% of 100
    SKU: ADA727 Brand: Adafruit Guides (3)
    This battery holder connects 3 AAA batteries together in series for powering all kinds of projects. Adafruit spec'd these out because the box is slim, and 3 AAA's add...
    - +

    25 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Delivered by Aug 17th
  9. 2 x 2032 Coin Cell Battery Holder - 6V output with On/Off switch
    Rating:
    100% of 100
    SKU: ADA783 Brand: Adafruit
    This tiny coin cell battery holder is ideal for small portable or wearable projects. It holds two 20mm coin cells (2032 are the most popular size) in series to generate...
    - +

    3 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Delivered by Aug 17th

Did you know: We create free online courses, tutorials, and videos. For makers, by makers.

Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.