Waveshare RP2350A USB Mini Development Board

SKU: WS-30274 Brand: Waveshare
Waveshare RP2350A USB Mini Development Board, Based On Raspberry Pi RP2350A Dual-core & Dual-architecture Microcontroller, 150MHz Operating Frequency...
$9.70 AUD, inc GST
$8.82 AUD, exc GST

Available with a lead time
Expect dispatch between Jul 04 and Jul 07

Quantity Discounts:

  • 10+ $8.46 (exc GST)
  • 25+ $8.20 (exc GST)
- +

0 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

Shipping:

  • $7+ Standard (5+ days*, tracked)
  • $11+ Express (2+ days*, tracked)
  • FREE Pickup (Newcastle only - must order online*)

Shipping costs may increase for heavy products or large orders.

Exact shipping can be calculated on the view cart page.

*Conditions apply, see shipping tab below.

The Waveshare RP2350A USB Mini Development Board is a compact and versatile board built around the RP2350A microcontroller. It features a unique dual-core architecture combining an Arm Cortex-M33 and a Hazard3 RISC-V processor, running at up to 150 MHz.

With 520KB of SRAM, 2MB onboard Flash, and support for USB 1.1 device and host, it also includes an onboard USB Type-A port via PIO for extended connectivity. The board is equipped with a USB Type-C connector, castellated edges for direct soldering, and supports drag-and-drop programming over USB.

Specifications

  • RP2350A microcontroller.
  • Adopts unique dual-core and dual-architecture design: dual-core Arm Cortex-M33 processor and dual-core Hazard3 RISC-V processor, flexible clock running up to 150 MHz
  • 520KB of SRAM, and 2MB of onboard Flash memory
  • Type-C connector, keeps it up to date, easier to use
  • Castellated module allows soldering directly to carrier boards
  • USB 1.1 with device and host support
  • Onboard 1x USB Type A expansion port via PIO, compatible with USB 2.0/1.1 transmission
  • Low-power sleep and dormant modes
  • Drag-and-drop programming using mass storage over USB
  • Adapting 15 × multi-function GPIO pins
  • 2 × SPI, 2 × I2C, 2 × UART, 4 × 12-bit ADC, 14 × controllable PWM channels
  • Accurate clock and timer on-chip
  • Temperature sensor
  • Accelerated floating-point libraries on-chip
  • 12 × Programmable I/O (PIO) state machines for custom peripheral support

What's On Board

RP2350A USB Mini development board, onboard components
  1. USB 2.0 Type A connector - Supports USB host or device via PIO
  2. BOOT button - Press it when resetting to enter download mode
  3. RESET button
  4. RP2350A - Dual-core and dual-architecture design, up to 150 MHz operating frequency
  5. WS2812 - cool RGB LED
  6. RT9013-33GB - 500mA LDO regulator, low noise, ultra-fast response
  7. W25Q16JVUXIQ - 2MB NOR-Flash
  8. USB Type-C connector - for programming, USB 1.1 with device and host support
 

Dimensions

RP2350A USB Mini development board, outline dimensions

Resources

Shipping List

  • 1 x RP2350-USB-A

This product is listed in:

Raspberry Pi>Pico>RP2 Based Boards

Product Comments

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

  • $3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
  • $7+ for Standard Post (typically 6+ business days, tracked)
  • $11+ for Express Post (typically 2+ business days, tracked)
  • Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

  • $12+ for Pack and Track (3+ days, tracked)
  • $16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

40 Aruma Place
Cardiff
NSW, 2285
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!

Write Your Own Review

Videos

View All

Guides

How to add mmWave Radar to a Pico | Detect and Track Humans

In this guide, we will be learning how to use the RD-03D radar sensor with a Raspberry Pi Pico so y...
In this guide, we will be learning how to use the RD-03D radar sensor with a Raspberry Pi Pico so y...

How to Control a Water Pump with a Raspberry Pi Pico

In this guide, we will be learning how to control a pump with a Raspberry Pi Pico. Whether you are ...
In this guide, we will be learning how to control a pump with a Raspberry Pi Pico. Whether you are ...

How to add GPS to a Raspberry Pi Pico | Get Real-Time Location in Your Project!

In this guide, we will be learning how to use a GPS module with the Raspberry Pi Pico and MicroPyth...
In this guide, we will be learning how to use a GPS module with the Raspberry Pi Pico and MicroPyth...

Raspberry Pi 5 Vs Raspberry Pi 4 Model B | Comparison & Benchmarking

The Raspberry Pi 5 is here and one of the biggest questions is, how does it stack up against the pr...
The Raspberry Pi 5 is here and one of the biggest questions is, how does it stack up against the pr...

Projects

safePower

I like working with the Pi Zero W and Pi 4 as they are very compact, very powerful and very cheap fo...
I like working with the Pi Zero W and Pi 4 as they are very compact, very powerful and very cheap fo...

ESP32 IR-Triggered Camera with Home Assistant Integration

I love the ESP line-up. I started by messing around with the ESP8266 and I completely fell in love w...
I love the ESP line-up. I started by messing around with the ESP8266 and I completely fell in love w...

LuMa 1 - The Neo Disco Ball

It is real and here it is! Including everything you need to make one a Luma 1 for yourself! S...
It is real and here it is! Including everything you need to make one a Luma 1 for yourself! S...

Educational Workshops

Raspberry Pi Workshop for Beginners

Welcome to the Raspberry Pi Workshop for Beginners! Here you'll be able to follow along with our s...
Welcome to the Raspberry Pi Workshop for Beginners! Here you'll be able to follow along with our s...
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.