Ultra Flexible 5V Natural White LED Strip - 320 LEDs per meter - 1 meter long - 4000K Color

SKU: ADA5851 Brand: Adafruit
Here at Adafruit, we love discovering new and exotic glowing things. Like moths to the flame, we were intrigued by these 'chip on board'...
$22.90 AUD, inc GST
$20.82 AUD, exc GST

Available with a lead time
Expect dispatch between Nov 28 and Dec 03

Quantity Discounts:

  • 10-25 $19.98 (exc GST)
  • 25+ $19.36 (exc GST)
- +

0 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

Shipping:

  • $7+ Standard (5+ days*, tracked)
  • $11+ Express (2+ days*, tracked)
  • FREE Pickup (Newcastle only - must order online*)

Shipping costs may increase for heavy products or large orders.

Exact shipping can be calculated on the view cart page.

*Conditions apply, see shipping tab below.

Here at Adafruit, Adafruit love discovering new and exotic glowing things. Like moths to the flame, Adafruit were intrigued by these 'chip on board' ultra-flexible white LED Strips with a whopping 320 SMT LEDs per meter, soldered side-by-side and diffused with a thin silicone epoxy! They look a lot like neon or incandescent tubing or maybe really nice EL wire, but without the need for expensive transformers, glass tubing, or inert gasses. The strip itself is only 5mm wide, the casing is 8mm wide but can be removed.

Unlike addressable neopixel-dot strips, these lights have a continuous, light source, and unlike Adafruit's 'Neon' tubing, they're much thinner and more flexible (but don't have a chunky diffused look) The trade-off for having a thin silicone cover and non-diffused tubing casing is that close up you can see the little hot spots between LEDs.

The silicone casing makes for a strong, durable, weather-proof casing. They're not guaranteed for dunking underwater or long-term outdoor exposure, but they're durable enough for outdoor projects like costumes, bike lighting, or festival decorations. Plus, with the adhesive backing, you can stick it where you please.

You'll get a 1-meter-long strip with two wires: black and red. Provide 3V at 220mA (bright) to 5V at 1.3A (very bright!), and the strip starts to glow.

This strip is powered from 5V, They also have similar white LED strips that are powered from 12V

Note these are not 'NeoPixel' LED strips; you cannot turn individual LEDs on or offThis guide on analog RGB LED strip control will show you how it works - you'll want a microcontroller with a PWM output and N-MOSFETs or a ULN2803 to control the power to the entire LED element.

Technical Details

RoHS 2 2011 65 EU CompliantRoHS 2 2015 863 EU Compliant

This product is listed in:

Components & Parts>LEDs>Non-addressable

Product Comments

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

  • $3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
  • $7+ for Standard Post (typically 6+ business days, tracked)
  • $11+ for Express Post (typically 2+ business days, tracked)
  • Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

  • $12+ for Pack and Track (3+ days, tracked)
  • $16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!

Write Your Own Review

Videos

View All

Guides

The Maker Revolution

The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...
The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...

Addressable RGB LED Controllers

Addressable RGB LED strips are one maker favourite that can really spruce up any project or even b...
Addressable RGB LED strips are one maker favourite that can really spruce up any project or even b...

What Are NeoPixel LEDs?

So in case you haven’t heard yet, digital LEDs are the go-to solution for any project that use...
So in case you haven’t heard yet, digital LEDs are the go-to solution for any project that use...

What Are DotStar LEDs (APA102/SK98225)?

So in case you haven’t heard yet, digital LEDs are the go-to solution for any project that use...
So in case you haven’t heard yet, digital LEDs are the go-to solution for any project that use...

Projects

Aircraft Lighting Model

The aim of this project was to create a working model of the aircraft exterior lighting systems. Ini...
The aim of this project was to create a working model of the aircraft exterior lighting systems. Ini...

Hogwarts Lights

Although there are commercially available lighting kits for Lego models, we found those that are ava...
Although there are commercially available lighting kits for Lego models, we found those that are ava...

Time lapsing in OctoPrint (Properly!)

Now that we have decked out our Lulzbot Taz 6 3D Printer with a really nice looking acrylic enclosur...
Now that we have decked out our Lulzbot Taz 6 3D Printer with a really nice looking acrylic enclosur...
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.