Skip to the beginning of the images gallery

SparkFun Thing Plus - DA16200

SKU: WRL-19696 Brand: Sparkfun

The SparkFun DA16200 Thing Plus utilizes a highly integrated ultra-low power WiFi system on chip that allows users to develop WiFi and IoT applications...

$60.30 AUD, inc GST

$54.82 AUD, exc GST

Quantity Discounts:

6-12 $53.17 (exc GST)
12+ $52.07 (exc GST)

Out of Stock

The SparkFun DA16200 Thing Plus utilizes a highly integrated ultra-low power WiFi system on chip (SoC) from Dialog that allows users to develop WiFi and IoT solutions. The DA16200 module contains an 802.11b/g/n radio (PHY), a baseband processor, a media access controller (MAC), on-chip memory and a host networking application processor all on a single silicon die. To make the Thing Plus as easy to use as possible, we've made the board Feather-compatible and it utilizes our handy Qwiic Connect System which means no soldering or shields are required to connect it to the rest of your system!

The SparkFun DA16200 Thing Plus includes Qwiic and LiPo battery connectors, multiple GPIO pins, and JTAG PTH pins for debugging. This unique Thing Plus model is ideal for your next IoT project, thanks partly to the numerous sleep modes that allow you to take advantage of current draws as low as 0.2 - 3.5 µA on the WiFi module.

The DA16200's system on a chip (SoC) has full offload capabilities to run the entire networking OS and TCP/IP stack on the chip; therefore, an external network processor, CPU, or microcontroller is not required. The module is WiFi Alliance certified for IEEE802.11b/g/n, WiFi Direct, and WPS functionalities. The WiFi Alliance transfer policy can transfer the WiFi Certifications without being tested again.

Note: Please be aware that the Thing Plus - DA16200 has a 3.3V logic level voltage.

The SparkFun Qwiic Connect System is an ecosystem of I²C sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you can’t hook it up wrong.

Features

SparkFun Thing Plus - DA16200 Features

Dialog DA16200MOD WiFi Module
- 16 Multifunctional GPIO Pins:
  - Up to four 12-bit ADC channels
  - Up to two UARTs
  - An available SPI Bus
  - An available I²C Bus
Thing Plus (or Feather) Form-Factor:
- Dimensions: 2.3" x 0.9"
- Two Mounting Holes:
  - 4-40 screw compatible
- 28 PTH Pins
- USB-C Connector
- 2-pin JST Connector for a LiPo Battery (not included)
- 4-pin JST Qwiic Connector
LEDs:
- PWR - Red 3.3V power indicator
- CHG - Yellow battery charging indicator
- STAT - Blue status/test LED (GPIO 4)
Buttons:
- IOC7
JTAG/SWD PTH Pins

DA16200MOD General Features:

Operating voltage: 2.1V to 3.6V
Operating temperature: -40 to 85 °C
Arm® Cortex®-M4F core w/ clock frequency of 30~160MHz
- ROM: 256kB
- SRAM: 512kB
- OTP: 2kB
- Retention SRAM: 48kB
WiFi processor
- IEEE 802.11b/g/n, 1x1, 20MHz channel bandwidth, 2.4GHz (up to 54 Mbps)
- IEEE 802.11s WiFi mesh
- WiFi security: WPA/WPA2-Enterprise/Personal, WPA2 SI, WPA3 SAE, and OWE
- Operating modes: Station, SoftAP, and WiFi Direct® Modes (GO, GC, GO fixed)
On-Chip RTC (± 250 ppm)
Three ultra-low power sleep modes
- Sleep current: 3.5 µA
RF Regulatory certifications:
- FCC (USA), IC (Canada), CE (EU), KC (Korea), TELEC (Japan), SRRC (China)

Documents

This product is listed in:

Development Boards
Wireless>General RF>Development Tools

Product Comments

Start the conversation

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

$3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
$6+ for Standard Post (typically 6+ business days, tracked)
$10+ for Express Post (typically 2+ business days, tracked)
Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

$11+ for Pack and Track (3+ days, tracked)
$16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!

Write Your Own Review

Guides

The Maker Revolution

By Michael

Date 13 April 2022

The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...

#poster #infographic #maker #movement #revolution

The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...

#poster #infographic #maker #movement #revolution

Projects

433mHz Radio connected pool thermometer

By Nathan

Date 30 March 2022

I was wanting to know what the water temperature was without having to physically go and check and I...

#arduino #feather #433mhz #rfm69hcw #rpi3