M5StickC ESP32-PICO Mini IoT Development Kit + Accessories

SKU: CE07684 Brand: M5Stack

Retired Product

Search for an alternative
We currently have limited local stock of this product and back-ordering is unavailable due to global supplier chipset shortages.
This product has been retired. It is no longer available, but this page has been kept for reference.

M5StickC is a mini M5Stack, powered by ESP32. It is a portable, easy-to-use, open source, IoT development board. What it can do? This tiny block is able to realize your idea, enlighten your creativity, and help with your IoT prototying in a very short time. It will take away a lot of pains from the development process.M5stickC is one of the core devices in M5Stack product series.

It is built in a continually growing hardware and software ecosystem. It has a lot of compatible modules and units, as well as the open source code & engineering communities that will help you maximize your benefits in every step of the developing process.

Power switch operation:

  • Power on :Press power button for 2 seconds
  • Power off :Press power button for 6 seconds

Notice:

  • Baud rate supported by M5StickC: 1200 ~115200, 250K, 500K, 750K, 1500K

Features

  • ESP32-based
  • Built-in 6-Axis IMU
  • Red LED
  • IR transmitter
  • Microphone
  • Buttons, LCD(0.96 inch)
  • Built-in Lipo Battery
  • Extendable Socket
  • Wearable & Wall mounted
  • Development Platform UIFlow, MicroPython, Arduino

Include

  • 1x M5StickC
  • 1x USB Type-C(20cm)

Applications

  • Internet of things terminal controller
  • Wearable devices
  • Stem education product
  • DIY creation

Specification

  • ESP32 240MHz dual core, 600 DMIPS, 520KB SRAM, Wi-Fi, dual mode Bluetooth
  • Flash Memory 4MB
  • Power Input 5V @ 500mA
  • Port TypeC x 1, GROVE(I2C+I/0+UART) x 1
  • LCD screen 0.96 inch, 80*160 Colorful TFT LCD, ST7735S
  • Button Custom button x 2
  • LED RED LED
  • MEMS MPU6886
  • IR Infrared transmission
  • MIC SPM1423
  • RTC BM8563
  • PMU AXP192
  • Battery 95 mAh @ 3.7V
  • Antenna 2.4G 3D Antenna
  • PIN port G0, G26, G36
  • Operating Temperature 32°F to 104°F ( 0°C to 40°C )
  • Net weight 15.1g
  • Gross weight 33g
  • Product Size 48.2*25.5*13.7mm
  • Package Size 55*55*20mm
  • Case Material Plastic ( PC )

Documents

If the drivers for the ESP32 don't automatically install you can download them here.

This product is listed in:

Retired

Product Comments

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

  • $3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
  • $7+ for Standard Post (typically 6+ business days, tracked)
  • $11+ for Express Post (typically 2+ business days, tracked)
  • Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

  • $12+ for Pack and Track (3+ days, tracked)
  • $16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!

Write Your Own Review

Guides

The Maker Revolution

The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...
The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...

Projects

The Snooze Logger - A Wearable Sleep Position Monitor

Everyone needs a good night’s sleep!One of the factors affecting sleep quality is sleep posit...
Everyone needs a good night’s sleep!One of the factors affecting sleep quality is sleep posit...

Spectral Animations with a DIY MSGEQ7 I2C Device

Frequency Reactive LEDs, i2c Protocol, Raspberry Pi, and Other Adventures.Here at Pix Incorpor...
Frequency Reactive LEDs, i2c Protocol, Raspberry Pi, and Other Adventures.Here at Pix Incorpor...

VisionSphere: Camera Motion Detection for Raspberry Pi

A simple camera motion detection system for Raspberry Pi. Definitely written with Aussie's in mind ...
A simple camera motion detection system for Raspberry Pi. Definitely written with Aussie's in mind ...
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.