M5StickC Development Kit with Hat

SKU: CE07614 Brand: M5Stack

Retired Product

Search for an alternative

We currently have limited local stock of this product and back-ordering is unavailable due to global supplier chipset shortages.

This product has been retired. It is no longer available, but this page has been kept for reference.

M5StickC is a mini M5Stack, powered by ESP32, which is a single 2.4 GHz Wi-Fi and Bluetooth combo chip and integrates a 4-MB SPI flash. It is a portable, easy-to-use, open source, IoT development board. What it can do? This tiny block is able to realize your idea, enlighten your creativity, and help with your IoT prototying in a very short time. It will take away a lot of pains from the development process.M5stickC is one of the core devices in M5Stack product series.

ENV II is an environment sensor which can sense temperature, humidity and atmospheric pressure. It is built with SHT30, BMP280 and BMM150 sensors, it is programmed over I2C. SHT30 is a digital temperature and humidity sensor with high precision and low power consumption. BMP280 is an absolute barometric pressure sensor which is especially designed for mobile applications. BMM150 is a magnetometer, which can be used to monitor the change of magnetic field and the direction of magnetic field.It offers the highest flexibility to optimize the device regarding power consumption, resolution and filter performance.

SPK HAT is an M5StickC compatible speaker, integrated PAM8303 amplifier (3w single channel type D power amplifier), High PSRR and differential inputs eliminate noise and rf interference, thus it has the characteristics of simple functions and high audio reproduction.

It is built in a continually growing hardware and software ecosystem. It has a lot of compatible modules and units, as well as the open source code & engineering communities that will help you maximize your benefits in every step of the developing process.

Features

ESP32-based
Built-in 6-Axis IMU
Red LED
IR transmitter
Microphone
Buttons, LCD(0.96 inch)
Built-in Lipo Battery
Extendable Socket
Wearable & Wall mounted
Development Platform UIFlow, MicroPython, Arduino
ENV HAT II

Measurement of temperature, humidity, air pressure and magnetic field
High-precision
Support IIC
GROVE interface, support UIFlow and Arduino
Two Lego installation holes

SPK HAT

Ultra-low EMI interference, 20dB better than FCC class B standard at 300MHz
Voltage 5 v power supply, with 4 Ω load power output 3 w, 10% of the total harmonic distortion
Ultra-low noise without input
Power range: 2.8V～5.5V
Shortcut protection

Includes

1x M5StickC
1x 20cm USB Type-C cable
1x ENV Hat II
1x SPK Hat
1x WALL/1515
1x Brick
1x Watch Belt

Applications

IoT terminal controller
Wearable devices
STEM education product
DIY creation
Weather Station
Compass
MP4/MP3

This product is listed in:

Retired

Product Comments

Start the conversation

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

$3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
$7+ for Standard Post (typically 6+ business days, tracked)
$11+ for Express Post (typically 2+ business days, tracked)
Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

$12+ for Pack and Track (3+ days, tracked)
$16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!