Standoffs are useful for mounting circuit boards, hardware, and anything that has holes for standard screw sizes. If your standoffs will make contact with any electrically sensitive components be sure to choose nylon.
Be sure to grab some stick on rubber feet so your project doesn't slide away!
Suitable for all kinds of circuit boards, sensors, mechanical support of the installation. They are great for building a multi-level robot chassis. This 10-pack of standoffs includes 10 sets screws and nuts for securing the top of the standoff to your project.
"These go to eleven." 11 millimeters that is! Adafruit's Black Plated M/F Brass Standoffs are engineered specifically to keep your Pi HAT snug on your Pi while also keeping...
Finally Adafruit get Adafruit's very own super sweet sixteen... 16 millimeters that is! Adafruit's Black Plated M/F Brass 16mm Standoffs are engineered specifically to keep your PiTFT...
These nylon standoffs are ¾" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure, or just getting it up off the table.
These nylon standoffs are 3/8" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure, or just getting it up off the table.
This M3 mounting kit provides you with different types of standoffs with screws and nuts which are most commonly used in DFRobot's projects. We use them to mount circuit boards and help build robots.
These hexagonal male-female aluminum standoffs keep parts spaced 0.25" (6 mm) apart and are great for building a multi-level robot chassis. Both ends of these 3/16"-wide standoffs have 2-56 threads. The standoffs are sold in packs of 4.
These hexagonal male-female aluminum standoffs keep parts spaced 0.375" (10 mm) apart and are great for building a multi-level robot chassis. Both ends of these 3/16"-wide standoffs have 2-56 threads. The standoffs are sold in packs of 4.
These hexagonal male-female aluminum standoffs keep parts spaced 0.5" (13 mm) apart and are great for building a multi-level robot chassis. Both ends of these 3/16"-wide standoffs have 2-56 threads. The standoffs are sold in packs of 4.
These hexagonal male-female aluminum standoffs keep parts spaced 0.25" (6 mm) apart and are great for building a multi-level robot chassis. Both ends of these 3/16"-wide standoffs have 4-40 threads. The standoffs are sold in packs of 4.
Keep your components separated with this 10-pack of 20mm-long (0.79") nylon spacers. These spacers have an outer diameter (OD) of 4 mm (0.16") and an inner diameter (ID) of 2.7 mm (0.11"), and they work with #2 and M2 screws.
Keep your components separated with this 10-pack of 25mm-long (0.98") nylon spacers. These spacers have an outer diameter (OD) of 4 mm (0.16") and an inner diameter (ID) of 2.7 mm (0.11"), and they work with #2 and M2 screws.
Keep your components separated with this 10-pack of 20mm-long (0.79") nylon spacers. These spacers have an outer diameter (OD) of 5 mm (0.20") and an inner diameter (ID) of 3.3 mm (0.13"), and they work with #2, #4, #6, M2, and M3 screws.
These 1/8"-long hexagonal female-female aluminum standoffs keep parts spaced 0.125 inches (3.2 mm) apart. They are like elongated, 3/16″-wide hex nuts, with 4-40 threads running through the entire length of each standoff. They are sold in packs of 4.
These hexagonal male-female aluminum standoffs keep parts spaced 0.75" (19 mm) apart and are great for building a multi-level robot chassis.Both ends of these 3/16"-wide standoffs have 2-56 threads. The standoffs are sold in packs of 4.
These hexagonal male-female aluminum standoffs keep parts spaced 0.5" (13 mm) apart and are great for building a multi-level robot chassis. Both ends of these 3/16"-wide standoffs have 4-40 threads. The standoffs are sold in packs of 4.
Keep your components separated with this 25-pack of 10mm-long (0.39") nylon spacers. These spacers have an outer diameter (OD) of 4 mm (0.16") and an inner diameter (ID) of 2.7 mm (0.11"), and they work with #2 and M2 screws.
Keep your components separated with this 25-pack of 10mm-long (0.39") nylon spacers. These spacers have an outer diameter (OD) of 5 mm (0.20") and an inner diameter (ID) of 3.3 mm (0.13"), and they work with #2, #4, #6, M2, and M3 screws.
Keep your components separated with this 25-pack of 12mm-long (0.47") nylon spacers. These spacers have an outer diameter (OD) of 5 mm (0.20") and an inner diameter (ID) of 3.3 mm (0.13"), and they work with #2, #4, #6, M2, and M3 screws.
Please continue if you would like to leave feedback for any of these topics:
Website features/issues
Content errors/improvements
Missing products/categories
Product assignments to categories
Search results relevance
For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.
Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.
Makers love reviews as much as you do, please follow this link to review the products you have purchased.