Search results for: 'usb to serial adapter cables'

33 results

USB to TTL Serial Cable - Debug / Console Cable for Raspberry Pi

Brand: Adafruit
The cable is easiest way ever to connect to your microcontroller/Raspberry Pi/WiFi router serial console port. Inside the big USB plug is a USBSerial conversion...
$19.20 AUD, inc GST

FTDI Serial TTL-232 USB Cable

Brand: Adafruit
Just about all electronics use TTL serial for debugging, bootloading, programming, serial output, etc. But it's rare for a computer to have a serial port anymore...
$38.95 AUD, inc GST

CP2102N USB-to-Serial Adapter Carrier

Brand: Pololu
This USB-to-serial adapter lets you easily connect a TTL serial device to a PC by acting as a virtual serial port. The board is a Micro-USB carrier for ...
$25.05 AUD, inc GST

USB to CAN Adapter Model A, STM32 Chip Solution, Multiple Working modes, Multi-system Compatible

Brand: Waveshare
USB to CAN Adapter Model A, STM32 Chip Solution, Multiple Working modes, Multi-system Compatible...
$33.25 AUD, inc GST

USB Cable A to Micro-B, 6 ft

Brand: Pololu
This Micro-USB cable is 6 ft (1.8 m) long and is terminated on one end by a Type-A USB plug and on the other by a Micro-B USB plug. This cable works with high-speed USB devices.
$8.20 AUD, inc GST

Xbee USB adapter

Brand: DFRobot
The DFRobot Xbee USB adapter is used for the XBee module configuration parameters to facilitate or to use as a wireless data transmission. It can be easily connected to a PC via mini USB cable. Further, it has XBee-setting support software X-CTU. It can also be used as a USB-TTL adapter.
$15.67 AUD, inc GST

USB to Multi-Protocol Serial Adapter: RS-232 / TTL UART / RS-485

Brand: Adafruit
No matter what serial-esque protocol you need to interface with, this USB to Multi-Protocol Serial adapter will be able to get this-connected-to-that. It...
$39.95 AUD, inc GST

USB to TTL Serial Cable

Brand: SparkFun
This is a USB to TTL Serial Cable which allows for a simple way to connect TTL interface devices to USB. The I/O pins of this cable are configured to operate at 3.3V specifically with a Raspberry Pi with each serial pin broken apart. Thanks to its separated pins, this cable is a perfect candidate for powering, connecting, and accessing the login and debug console on the Raspberry Pi.
$39.45 AUD, inc GST

FTDI Friend + extras - v1.0

Brand: Adafruit
Note: These use genuine FTDI chips, either Adafruit purchase them or they are manufactured to Adafruit's specifications with the requirement of genuine FTDI chips 10/22/14 -...
$27.10 AUD, inc GST

FTDI Cable 5V VCC-3.3V I/O

Brand: SparkFun
The FTDI cable is a USB to Serial (TTL level) converter which allows for a simple way to connect TTL interface devices to USB. The VCC pins of this FTDI cable are configured to operate at 5V with 3.3V I/O.
$44.15 AUD, inc GST

USB to RS232 Converter - 6ft

Brand: SparkFun
There are a lot of devices out there that still communicate over RS232 but we bet your new laptop isn’t one of them. Don’t worry, though, we’ve got you covered. This 6ft converter plugs into your computer’s USB port and provides you with a DB-9 RSR232 connection. After installing the drivers onto your Windows, Mac or RedHat Linux system, the FTDI chipset inside the cable will enumerate as a COM port with a baud rate adjustable to whatever setup you want to connect to.
$61.90 AUD, inc GST

Pololu USB AVR Programmer

Brand: Pololu
This device is a programmer for AVR-based controllers, such as Pololu's Orangutan robot controllers and the 3pi robot. The programmer emulates an STK500 on a virtual serial port, making it compatible with standard AVR programming software. Two additional features help with building and debugging projects: a TTL-level serial port for general-purpose communication and a SLO-scope for monitoring signals and voltage levels. A USB cable and ISP cable are included.
$50.20 AUD, inc GST

USB to Multi-Protocol Serial Cable - RS-232 / TTL UART / RS-485

Brand: Adafruit
No matter what serial-esque protocol you need to interface with, this USB to Multi-Protocol Serial adapter cable will be able to get...
$51.95 AUD, inc GST

FTDI Basic Breakout - 3.3V

Brand: SparkFun
This is the newest revision of our FTDI Basic. We now use a SMD 6-pin header on the bottom, which makes it smaller and more compact. Functionality has remained the same.
$34.35 AUD, inc GST

USB Type C to DB-9 Adapter Cable - 1.5m long

Brand: Adafruit
This USB Type C cable adds a DB-9 (DE-9) serial port to your computer or laptop. Works with MacOS X, Linux, and Windows. Note that this provides...
$36.35 AUD, inc GST

SparkFun Beefy 3 - FTDI Basic Breakout

Brand: SparkFun
This is SparkFun Beefy 3 FTDI Basic Breakout for the FTDI FT231X USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 3.3V Arduino boards. It can also be used for general serial applications. Built upon the same foundation as our 3.3V SparkFun FTDI Basic Breakout, the Beefy 3 is equipped with an AP2112K voltage regulator making this FTDI basic breakout board capable of handling a current load of up to 600 mA! With the addition of a more “Beefy” voltage regulator your will now be able to power a 3.3V project directly from the FTDI. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 3.3V Arduino boards.
$31.40 AUD, inc GST

XBee Explorer Dongle

Brand: SparkFun
This is the XBee Explorer Dongle unit for the Digi XBee module line. With the XBee Explorer Dongle you can plug the unit directly into your USB port and have it act as a gateway between your computer and the XBee. No cables needed! This unit works with all XBee modules including the Series 1 and Series 2.5, standard and Pro version. The on-board voltage regulator is good up to 500mA.
$53.95 AUD, inc GST

Adafruit WCH CH9102F Friend - USB to Serial Converter

Brand: Adafruit
Long gone are the days of parallel ports and serial ports. Now the USB port reigns supreme! But USB is hard, and you just want to transfer your everyday...
$8.95 AUD, inc GST

SparkFun FTDI Starter Kit - 3.3V

Brand: SparkFun
The SparkFun 3.3V FTDI Starter Kit gives you just what you need to get started with FTDI FT232RL USB to serial IC. The pinout of the included board matches the FTDI...
$33.15 AUD, inc GST

USB/Serial Converter - FT232RL

Brand: Adafruit
This USB cable adds a DB9 serial port to your computer or laptop. Works with MacOS X, Linux and Windows. Note that this provides (approximately) +-10V serial (RS232)...
$39.20 AUD, inc GST

XBee USB Adapter V2

Brand: DFRobot
The XBee USB Adapter V2 is an update version from DFRobot. It features an Atmega8U2 programmed as a USB-to-serial converter, the same chip found on the Arduino Uno.
$31.52 AUD, inc GST

Pololu USB AVR Programmer v2.1

Brand: Pololu
A USB In-system programmer, suitable for AVR controllers and AVR based boards. Can be used for general purpose serial communication, debugging or programming microcontrollers
$29.35 AUD, inc GST

FTDI Cable 5V

Brand: SparkFun
The FTDI cable is a USB to Serial (TTL level) converter which allows for a simple way to connect TTL interface devices to USB. The I/O pins of this FTDI cable are configured to operate at 5V.
$46.40 AUD, inc GST

RFID USB Reader

Brand: SparkFun
The RFID USB Reader is a simple to use, USB to serial base unit for the ID-3LA, ID-12LA, and ID-20LA readers. Simply plug a reader into the headers and attach a miniUSB cable. Open a terminal program of your choice at 9600bps 8N1, then scan your 125kHz ID tag and the unique 32-bit ID will be shown on the screen. The unit is based on a FTDI chip and comes with a read LED and buzzer.
$49.65 AUD, inc GST

FTDI Basic Breakout - 5V

Brand: SparkFun
This is the newest revision of our FTDI Basic. We now use a SMD 6-pin header on the bottom, which makes it smaller and more compact. Functionality has remained the same.
$31.95 AUD, inc GST

Mini Maestro 18-Channel USB Servo Controller (Assembled)

Brand: Pololu
The 18-channel Mini Maestro 18 raises the performance bar for serial servo controllers with features such as a native USB interface and internal scripting control. Whether you want the best servo control available (0.25μs resolution with built-in speed and acceleration control and pulse rates up to 333 Hz) or a general I/O controller (e.g. to interface with a sensor or ESC via your USB port), this compact, versatile device will deliver. This fully-assembled version ships with header pins installed.
$78.15 AUD, inc GST

PiKVM V4 Mini

Brand: HiPi.io
The next generation of Raspberry Pi based KVM over IP. Manage your servers or PC remotely! PiKVM is a feature-rich, production grade, open-source, Raspberry Pi based KVM over IP device.
$394.95 AUD, inc GST

SparkFun FT231X Breakout Kit

Brand: SparkFun
The SparkFun FT231X Breakout Kit provides you with everything that you need to get started with FTDI with the full UART hardware handshake feature! The pin-out of...
$31.90 AUD, inc GST

SiK Telemetry Radio V3 - 915MHz, 100mW

Brand: SparkFun
The 915MHz SiK Telemetry Radio V3 is a lightweight and inexpensive open source radio platform that can allow for ranges of 300m or more out of the box...
$289.95 AUD, inc GST

Unit CamS3 Wi-Fi Camera 5MP

Brand: M5Stack
DescriptionCAMS3 5MP Unit is a streamlined camera module based on the ESP32S3, supporting WiFi cloud image transmission. It features 8M PSRAM and 16M...
$41.80 AUD, inc GST

PM2.5 Air Quality Sensor and Breadboard Adapter Kit - PMS5003

Brand: Adafruit
Breathe easy, knowing that you can track and sense the quality of the air around you with the PM2.5 Air Quality Sensor with Breadboard Adapter particulate sensor...
$77.95 AUD, inc GST

UM7-LT Orientation Sensor (Redshift Labs)

Brand: Pololu
The UM7-LT orientation sensor from Redshift Labs is an Attitude and Heading Reference System (AHRS) that contains a three-axis accelerometer, rate gyro, and magnetometer. It combines this data using an Extended Kalman Filter to produce attitude and heading estimates. This LT version of the UM7 does not have an enclosure.
$259.95 AUD, inc GST

2.5" SATA III to USB 3.0 Adapter Cable - 30cm long

Brand: Adafruit
This 2.5" SATA III to USB 3.0 Adapter Cable allows you to connect a standard 2.5" hard drive (HDD or SSD) to your computer. SATA III is like, a...
$31.90 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.