Search results for: 'usb power delivery trigger board'

16 results

USB-C Power Delivery Trigger Board (Selectable voltage)

Brand: Core Electronics

Tired of needing a different regulator or plug pack for every single project? This board gives you selectable voltages through USB-C PD!

$6.70 AUD, inc GST

Adafruit USB Type C Power Delivery Dummy Breakout - I2C or Fixed - HUSB238

Brand: Adafruit
The HUSB238 USB PD sink chip is neat in that you can either use jumpers (really, resistor selection) to set the desired PD voltage and current or you can...
$10.55 AUD, inc GST

Adafruit USB Type C Power Delivery Dummy - I2C or Switchable - HUSB238 - STEMMA QT / Qwiic

Brand: Adafruit
The HUSB238 USB PD sink chip is neat in that you can either use switches (really, resistor selection) to set the desired PD voltage or use I2C for dynamic...
$18.45 AUD, inc GST

PPSTrigger V2.2 - Current Limit USB PD/PPS trigger

Brand: CentyLab

Turn your USB-C PPS charger into a variable lab supply. This module negotiates 3.3 – 21 volt outputs and features constant current limiting for safely driving LEDs directly.

$24.95 AUD, inc GST

SparkFun Power Delivery Board - USB-C (Qwiic)

Brand: Sparkfun
It's time to effectively manage the power distribution into your project and with the SparkFun Power Delivery Board, you can! Traditional power adapters can provide...
$52.40 AUD, inc GST

PD Power Extension Board for Raspberry Pi 5

Brand: The Pi Hut
The PD Power Expansion board from 52Pi is a multi-feature power management solution for Raspberry Pi 5. The board offers a range of power input options,...
$58.45 AUD, inc GST

5V USB-C Dual Supply - Dual Ideal Diodes

Brand: The Pi Hut
Power USB-C devices from two USB-C power sources! Where does power go? Power from each USB-C input (A/B) connector goes via a MOSFET "Ideal Diode" to the...
$9.30 AUD, inc GST

USB C PD to 2.1mm Cable with Selectable Voltage Button

Brand: Adafruit
This USB C PD to 2.1mm Cable with Selectable Voltage Button will help you get the most out of your USB C Power Delivery wall warts by letting you select...
$22.70 AUD, inc GST
Similar matches

Raspberry Pi 45W Power Supply (USB-C)

Brand: Core Electronics

Power up any USB-C devices with this beefy 45W power supply, with PD up to 20V 2.25A!

$25.30 AUD, inc GST

DC-DC USB 0.9V-5V to 5V DC Boost Step-up Power Supply Module

Brand: Core Electronics
Converts any DC voltage between 0.9V and 5V to a steady 5VDC. Can supply up to 600mA output current.
$0.63 AUD, inc GST

Simple USB C Socket Breakout

Brand: Adafruit
This Simple USB Type C breakout is kinda interesting, it looks similar to this USB Type C SMT Inline Breakout Board, but it's an 'inline'...
$3.30 AUD, inc GST

USB KeepAlive SMD - Pre-assembled Power Bank Adapter

Brand: The Pi Hut
Keep your power bank from auto-shutting off with this pre-assembled USB KeepAlive adapter, designed to maintain power delivery for low-current devices like microcontrollers, Raspberry Pi Pico, and other USB-powered projects.
$15.95 AUD, inc GST

USB-C 112W PD Device Power Supply

Brand: Core Electronics

This slim & lightweight 112W USB-C power delivery (PD) charger offers fast recharging for MacBooks, Nintendo Switch and other type “C” devices. It's also fitted with a 2.4A USB charging output for powering or charging other peripheral devices.

$109.95 AUD, inc GST

WisBlock USB LiPo Solar Power Slot Module RAK19012

Brand: RAKwireless

Modular power board offers USB-C, battery and solar charging to flash and test firmware in WisBlock projects.

$11.50 AUD, inc GST

SparkFun Soft Power Switch - USB-C

Brand: Sparkfun
The SparkFun Soft Power Switch is a passive, hard on/off switch with software feedback and control via USB-C connectors...
$14.50 AUD, inc GST

USB micro B JIG Dummy Plug

Brand: Adafruit
This USB micro B "JIG" Dummy Plug is a small, handy device for those interested in debugging their smartphones or other devices that...
$2.85 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.