Search results for: 'trunnion'

This compact bracket enables convenient mounting of popular, Sanyo-style micro metal gearmotors. The black plastic bracket encloses the otherwise exposed gears, and the mounting tabs capture the nuts for easy installation. The brackets are sold in pairs, and each bracket comes with two #2 screws and two nuts.

These aluminum gearmotor brackets let you mount Pololu’s 37D mm metal gearmotors to your project. The brackets are sold in pairs, and each bracket includes six M3 screws for securing the motor to the bracket. Each bracket also features fourteen mounting holes for M3 or #4-size screws (not included), giving you a variety of mounting options.

High quality black anodized aluminum multi-purpose standard servo bracket. It is suitable to make Pan/Tilt and multi-axis joints for use in robot arms and legs.

This 6mm Bore Aluminum Clamping Collar has an M4 socket head pinch bolt to provide excellent clamping force on a 6mm round or 6mm D profile.....

4002 Series Flexible Clamping Shaft Coupler (6mm Round Bore to 8mm Round Bore)

4002 Series Flexible Clamping Shaft Coupler (5mm Round Bore to 8mm Round Bore)

These aluminum gearmotor brackets let you securely mount Pololu’s 25D mm metal gearmotors to your project. The brackets are sold in pairs, and each bracket includes four M3 screws for securing the motor to the bracket. Each bracket also features seven mounting holes and twelve mounting slots for M3 or #4-size screws (not included), giving you a variety of mounting options.

These are very handy. They are simple angle brackets with one threaded and unthreaded hole. Use them for connecting PCBs at 90 degree angles, mounting accelerometers, gryros, etc. They can also be used on the universal plate set for mounting all sorts of sensors and such.

This compact bracket enables convenient mounting of popular, Sanyo-style micro metal gearmotors. The white plastic bracket encloses the otherwise exposed gears, and the mounting tabs capture the nuts for easy installation. This version has mounting tabs that allow for use with the Pololu Wheel 42×19 mm and encoder. The brackets are sold in pairs, and each bracket comes with two #2 screws and two nuts.

This machined aluminum gearmotor bracket lets you securely mount Pololu’s 37D mm metal gearmotors to your project. The six holes on the bracket face line up with the six mounting holes on the 37D gearbox, and the bracket features three tapped M3 holes on the bottom that can be used to mount it to a surface. The bracket includes nine M3 screws: three for mounting the bracket to a surface and six for mounting it to the gearmotor.

This machined aluminum bracket allows the Concentric LD series linear actuators to be mounted to a structure. Complete mounting hardware is included. Two brackets are required for mounting each actuator.

This steel 90° bracket is a sturdy solution for right angles in your project. Its 16mm goBILDA pattern thru-holes not only surround.....

This Male-to-Female 8mm REX™ CV Joint offers positive drive at variable angles. A constant-velocity (CV) joint allows you to create a drive.....

A 64mm length of 2106 Series 8mm Diameter Stainless Steel REX Shaft with E-Clip

A 24mm length of 2106 Series 8mm Diameter Stainless Steel REX Shaft with E-Clip

A 52mm length of 2106 Series 8mm Diameter Stainless Steel REX Shaft with E-Clip

While this incredibly robust Steel U-Bracket rocks the same height, width, and 2.5mm thickness of a 1-hole length of 1120 Series U-Channel,.....

This bracket was designed specifically for the Glideforce Industrial-Duty (ID) linear actuators. It is made from stamped, black powder coated steel and...

This is a high quality aluminum servo bracket (short), available in black anodized. Works great with DFRobot's Multi-Purpose Servo Bracket.

This bracket was designed specifically for the Glideforce Light-Duty (LD) linear actuators. It is made from stamped, zinc-plated steel and has been tested...

This bracket was designed specifically for the Glideforce Industrial-Duty (ID) linear actuators. It is machined out of a single piece of aluminum and has...

These aluminum gearmotor brackets let you securely mount Pololu's larger Pololu plastic gearmotors (228:1 offset, 120:1 offset, 200:1 90-degree, and 120:1 90-degree) to your project. These brackets are sold in pairs, and each bracket comes with two 1″ long and two 0.75″ long #2-56 screws for securing different size motors. Each bracket also features two mounting holes and one mounting slot intended for #4-size screws (not included).

This bracket was designed specifically for the Glideforce Medium-Duty (MD) linear actuators. It is made from stamped, zinc-plated steel and has been...

This coated steel bracket lets you securely mount typical NEMA 23-size stepper motors to your project. The bracket features two slots for various mounting...

This bracket was designed specifically for the Glideforce Medium-Duty (MD) linear actuators. It is machined out of a single piece of aluminum and has been...

This Steel U-Bracket is a dimensional sibling to the 1-hole length of 1120 Series U-Channel. It differs only in its steel construction and.....

A 2-1 1108 Series Flat Pattern Bracket

A 1-1 1108 Series Flat Pattern Bracket

This 2501-0001-0002 Pulley Bracket is designed for use with the 2500-0014-0336 Viper Slide. This pack includes four pulley brackets and.....

A 3-1 1111 Series Angle Pattern Bracket

This 8mm REX profile shaft is for those of you FTC Teams that wish to fasten an 8mm REX shaft to the REV motion pattern, such as found on.....

Downloads