Search results for: 'sht30'

23 results

SHT-30 Mesh-protected Weather-proof Temperature/Humidity Sensor - 1M Cable

Brand: Adafruit
Take your next outdoor sensor project to the next level with this SHT-30 based temperature/humidity sensor. The sensor includes a dual-use sensor module from Sensirion...
$53.70 AUD, inc GST

Gravity: Analog SHT30 Temperature & Humidity Sensor

Brand: DFRobot
Gravity: Analog SHT30 Temperature & Humidity Sensor adopts the new generation SHT30 temperature and humidity sensor from Sensirion. Thanks to Sensirion's CMOSens®...
$11.58 AUD, inc GST

SHT30 Temperature And Humidity Sensor - Wired Enclosed Shell

Brand: Adafruit
Keep your electronics from going barefoot, and give them sleek cyberpunk metal feet! These aluminum bumpers are originally designed for keyboard enclosures that are made of anodized aluminum with a black rubber nubbin embedded inside for no-slip support. They're so cool looking we figure they could be your new favorite accessory.
$18.45 AUD, inc GST

JST SH 4-Pin to Premium Male Headers Cable - Qwiic Compatible - 150mm Long

Brand: Adafruit
This 4-wire cable is a little over 150mm / 6" long and fitted with JST-SH female 4-pin connectors on one end and premium Dupont male headers on the other. Compared...
$1.95 AUD, inc GST

Adafruit Sensirion SHT40 Temperature & Humidity Sensor - STEMMA QT / Qwiic

Brand: Adafruit
Sensirion Temperature/Humidity sensors are some of the finest & highest-accuracy devices you can get. And finally, Adafruit have some that have a true I2C interface for easy reading. The SHT40 sensor is the fourth generation (started at the SHT10 and worked its way up to the top!). The SHT40 has an excellent ±1.8% typical relative humidity accuracy from 25 to 75% and ±0.2 °C typical accuracy from 0 to 75 °C.
$10.80 AUD, inc GST

STEMMA QT / Qwiic JST SH 4-Pin Cable - 200mm Long

Brand: Adafruit
This 4-wire cable is a little over 200mm / 7.8" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH these are 1mm...
$2.55 AUD, inc GST

Adafruit Sensirion SHT45 Precision Temp & Humidity with PTFE - STEMMA QT / Qwiic

Brand: Adafruit
Sensirion Temperature/Humidity sensors are some of the finest & highest-accuracy devices you can get. And finally, we have some that have a true I2C...
$26.20 AUD, inc GST

Gravity: AHT20 Temperature and Humidity Sensor

Brand: DFRobot
The AHT20 is a high-precision but low-cost temperature and humidity sensor, which is equipped with an improved MEMS semiconductor capacitive humidity...
$6.63 AUD, inc GST

Adafruit AHT20 - Temperature & Humidity Sensor Breakout Board - STEMMA QT / Qwiic

Brand: Adafruit
The AHT20 is a nice but inexpensive temperature and humidity sensor from the same folks that brought Adafruit the DHT22. You can take sensor readings as often as you like, and it uses standard I2C so its super easy to use with any Arduino or Linux/Raspberry Pi board.
$8.85 AUD, inc GST

Fermion:SHT40 Humidity & Temperature Sensor (Breakout)

Brand: DFRobot
The SHT4X is the 4th generation digital temperature and humidity sensor from Sensirion. In line with Sensirion’s industry-proven humidity and temperature...
$14.02 AUD, inc GST

Adafruit Sensirion SHTC3 Temperature & Humidity Sensor - STEMMA QT / Qwiic

Brand: Adafruit
Sensirion Temperature/Humidity sensors are some of the finest & highest-accuracy devices you can get. And finally, Adafruit have some that have a true I2C interface for easy reading. The SHTC3 sensor has an excellent ±2% relative humidity and ±0.2 °C accuracy for most uses. Unlike some earlier SHT sensors, this sensor has a true I2C interface on address 0x70.
$13.65 AUD, inc GST

JST SH-Style Cable, 4-Pin, Single-Ended Female, 75cm

Brand: Pololu
This 4-conductor, 75 cm (30") cable has 28 AWG wires and a 4-pin female JST SH-type connector on one end. The other ends of the wires are unterminated;...
$5.55 AUD, inc GST

M5StickC ENV Hat III (SHT30, QMP6988)

Brand: M5Stack
The ENV III HAT is a multifunctional environmental sensor adapted to attach to the M5StickC series.
$20.95 AUD, inc GST

JST-SH 4-pin Cable with Micro SMT Test Hooks - STEMMA QT / Qwiic

Brand: Adafruit
This cable will make it super easy to use our plug-and-play STEMMA QT boards and controllers with chips, breakouts, and other devices that are I2C compatible but don't come with a STEMMA QT socket already on 'em.
$5.70 AUD, inc GST

M5Stack Universal IOT Experiment Kit for ESP32(SHT30)

Brand: M5Stack
An all-in-one Learning board powered by ESP32, which includes anything you can imagine in an IoT + industrial application scenarios.
$249.95 AUD, inc GST

Adafruit HDC3022 Precision Temperature & Humidity Sensor - STEMMA QT / Qwiic

Brand: Adafruit

This breakout features the highest accuracy & precision that we have see so far! It has the TI HDC302x series chip with typical 0.5% accuracy for the RH sensor (with 0.19% long-term drift) and ±0.1°C typical accuracy for the temperature sensor. All at a very nice price.

$15.60 AUD, inc GST
Similar matches

SHT31 Weather-proof Temperature & Humidity Sensor

Brand: DFRobot
This is an SHT31 Temperature & Humidity sensor housed in a weather-proof enclosure. The sensor is designed to be waterproof so you can use it safely in outdoor projects...
$33.06 AUD, inc GST

Adafruit Sensirion SHT45 Precision Temperature & Humidity Sensor - STEMMA QT / Qwiic

Brand: Adafruit
Sensirion Temperature/Humidity sensors are some of the finest & highest-accuracy devices you can get. And finally, we have some that have a true I2C...
$22.90 AUD, inc GST

SHT31 Digital Temperature & Humidity Sensor Breakout

Brand: DFRobot
This DFRobot SHT31 digital temperature and humidity sensor is based upon the Sensirion SHT31 sensor IC. Thanks to Sensirion’s CMOSens® technology, highly integrated...
$14.49 AUD, inc GST

Gravity: SHT31-F Digital Temperature and Humidity Sensor

Brand: DFRobot
Gravity: SHT31-F digital temperature and humidity sensor is based upon the Sensirion SHT31-F sensor IC. Thanks to Sensirion’s CMOSens® technology, highly integrated...
$16.17 AUD, inc GST

Particulate Matter Sensor - SPS30

Brand: SparkFun
The Sensirion Particulate Matter Sensor SPS30 is a compact, high quality, optical particle sensor that uses laser scattering and Sensirion’s innovative contamination...
$95.25 AUD, inc GST

Adafruit SGP30 Air Quality Sensor Breakout - VOC and eCO2 - STEMMA QT / Qwiic

Brand: Adafruit
Breathe easy with the SGP30 Multi-Pixel Gas Sensor, a fully integrated MOX gas sensor. This is a very fine air quality sensor from the sensor experts at Sensirion...
$30.10 AUD, inc GST

Adafruit LPS28 (LPS28DFW) Pressure Sensor - STEMMA QT / Qwiic

Brand: Adafruit
We stock a large number of barometric pressure sensors, and they all have slight differences: some are ported, some are tiny, some are popular and precise...
$21.60 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.