Search results for: &#039;shielded twisted pair can bus cable&#039;

Add connectivity to a computer, switch or ethernet device.

$4.10 AUD, inc GST

Cat6 0.3m Patch Cable (RJ45)

Add connectivity to a computer, switch or ethernet device.

$3.75 AUD, inc GST

Cat6 0.15m Patch Cable (RJ45)

Add connectivity to a computer, switch or ethernet device.

$3.30 AUD, inc GST

Single Pair Ethernet Cable - 0.5m (Shielded)

This 0.5m SPE cable enables Ethernet data transmissions by using only two wires and the simultaneous power supply for terminals via a Power over Data Line...

$41.25 AUD, inc GST

Similar matches

Add connectivity to a computer, switch or ethernet device.

$5.40 AUD, inc GST

Cat6 2m Patch Cable (RJ45)

Add connectivity to a computer, switch or ethernet device.

$7.85 AUD, inc GST

Silicone Cover Stranded-Core Wire - 2m 30AWG Red

24AWG White 4 Core Security Cable (per metre)

If you need data and power somewhere far from your control box - grab some of this cable!

$1.05 AUD, inc GST

Flexible Qwiic Cable - 500mm

This is a 500mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be used for other applications...

$5.80 AUD, inc GST

Cat6 5m Patch Cable (RJ45)

Add connectivity computer, switch, or ethernet device on the other side of the room.

$13.95 AUD, inc GST

Silicone Cover Stranded-Core Wire - 50ft 30AWG Black

Silicone-sheathing wire is super-flexible and soft, and its also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps out. Adafruit...

$10.95 AUD, inc GST

CANBed - Arduino CAN-BUS Development Kit

CANBed - Arduino CAN-BUS Development Kit embeds an ATmega32U4 chip, which means you don’t need to add other jump wires to another Arduino Board

$50.15 AUD, inc GST

CAT 6 Cable - 1M

This 3ft Category 6 (CAT 6) Ethernet cable is the solution to your internet working needs. With a speed of up to 500MHz you can connect to your LAN/WAN segments and networking gear at maximum speed. Also, with its superior connector you get a cable that is built for speed and endurance.

$5.30 AUD, inc GST

Cat6 3m Patch Cable (RJ45)

Add connectivity to a computer, switch or ethernet device.

$7.50 AUD, inc GST

CAN bus Module (B) for Raspberry Pi Pico, enabling long range communication through SPI...

CAN bus Module (B) for Raspberry Pi Pico

Brand: Waveshare

$20.15 AUD, inc GST

I2C CAN-BUS Module based on MCP2551 and MCP2515

We launched the Serial CAN Bus Module years ago, which is very practical and easy to use. Now we have slightly modified the Serial CAN Bus...

$36.65 AUD, inc GST

Cat6 20m Patch Cable (RJ45)

Add connectivity to a distant computer, switch or ethernet device.

$36.65 AUD, inc GST

The CAN-BUS shield v2.0 is designed for the Arduino Microcontroller. It is compatible with the Arduino standard interface and can be stacked on an Arduino UNO, Leonardo or MEGA board. The shield integrates an MCP2515 CAN-BUS chip on the shield and has a CAN-BUS transceiver function. With an on-board DB9 and CAN-BUS connector you can choose a suitable port according to your host device. There is also an integrated MicroSD socket for data storage - a perfect solution for data logging applications.

CAN-BUS Shield V2.0

Brand: DFRobot

$36.22 AUD, inc GST

Blue Cat5e U/UTP LAN Data Cable (per metre)

If you need data and power somewhere far from your control box - grab some of this cable!

$2.10 AUD, inc GST

Silicone Cover Stranded-Core Wire - 50ft 30AWG White

Silicone-sheathing wire is super-flexible and soft, and its also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps out. Adafruit...

$10.60 AUD, inc GST

Grove - CAN BUS Module based on GD32E103, CAN FD supported

CAN BUS Module based on GD32E103 adopts a brand-new design, uses the cheap and high-performance GD32E103 microcontroller as the main...

$12.50 AUD, inc GST

CAN-BUS Shield V2 (Seeed Studio)

CAN-BUS is a common industrial bus because of its long travel distance, medium communication speed and high reliability.

$50.90 AUD, inc GST

Cat6 10m Patch Cable (RJ45)

Add connectivity to a distant computer, switch or ethernet device.

$25.60 AUD, inc GST

Waterproof Polarized 4-Wire Cable Set

Outdoor enthusiasts rejoice! Adafruit now have very useful 4-wire polarized cable sets in a waterproof variety. These cable sets are ideal for projects that must weather...

$6.40 AUD, inc GST

This 12" (30 cm), 6-conductor ribbon cable has a female 2×3 IDC connector on each end that is designed to plug into a 0.100" (2.54 mm) 2×3 shrouded box header. It can also be used with 0.100" male header pins.

6-Conductor Ribbon Cable with IDC Connectors 12"

Brand: Pololu

$6.65 AUD, inc GST

Passive PoE Cable Set

Integrating Ethernet support into your project is a great way to relay data through a local area network and even bounce information out to the internet. Sometimes it’s hard to get power to your Ethernet devices. Wouldn’t it be convenient to use the same cable for power and data? Using these power over Ethernet adapters, you can do just that!

$11.60 AUD, inc GST

Skinny Ethernet LAN UTP CAT5 Cable - 3mm diameter - 30cm long

When you want a super skinny Ethernet / CAT-5 cable, this noodle-y UTP jumper is only 3mm thick at the center so that it can flex around enclosures...

$5.35 AUD, inc GST

CAN-BUS Shield

The CAN-BUS Shield provides your Arduino or Redboard with CAN-BUS capabilities and allows you to hack your vehicle. It uses the Microchip MCP2515 CAN controller with the MCP2551 CAN transceiver. CAN connection is via a standard 9-way sub-D for use with OBD-II cable. Ideal for automative CAN application. The shield also has a uSD card holder, serial LCD connector and connector for an EM406 GPS module. These features make this shield ideal for data logging application.

$62.60 AUD, inc GST

This 12-inch (300-mm), twisted Y-cable can be used to split a single RC hobby servo signal into two identical outputs. It has 22-AWG wires terminated on all three ends by “JR”-style female connectors, which are compatible with 0.1" header bins and both male JR and male Futaba J connectors. The split occurs close to the cable’s input, so the two output ends can be separated by up to approximately 18" (450 mm). The cable’s conductors each consist of 60 strands, making it much more flexible than standard servo cables, and the wires are twisted to reduce electromagnetic interference (EMI).

Twisted Servo Y Splitter Cable 12" Female - 2x Female

Brand: Pololu

$14.55 AUD, inc GST

6-conductor 0.1 socket-socket cable - 6 long

6" (150mm) long jumper cable of 6 conductors, 0.1" spacing with two 'female'/sockets on either end. Great for wiring up ShiftBrites together!

$3.60 AUD, inc GST

Out of stock

Thin RG-174/U Coaxial Cable - 3 meters / approx 10 feet

If you are doing biomedical instrumentation or maybe RF work or just need to get signal from here to there, cleanly, you will love this cable! It's extremely thin...

$11.10 AUD, inc GST

Out of stock

This 6-inch (150-mm), twisted cable has 22-AWG wires and female “JR”-style connectors on both ends, the same kind of connector commonly found on RC hobby servos. It can be used to make connections between devices with 0.1" 3-pin male headers, such as between RC servo controllers or RC receivers and motor controllers with an RC interface. It can also be a convenient way to connect various 3-pin sensors to a robot controller. The cable’s conductors each consist of 60 strands, making it much more flexible than standard servo cables, and the wires are twisted to reduce electromagnetic interference (EMI).

Twisted Servo Extension Cable 6" Female - Female

Brand: Pololu

$7.10 AUD, inc GST

Skinny Ethernet LAN UTP CAT5 Cable - 3mm diameter - 1 meter long

When you want a super skinny Ethernet / CAT-5 cable, this noodle-y UTP jumper is only 3mm thick at the center, so it can flex around enclosures easily....

$6.75 AUD, inc GST

Out of stock