Search results for: &#039;sandisk 32gb&#039;

Adafruit microSD Card BFF Add-On for QT Py and Xiao

Our QT Py boards are a great way to make very small microcontroller projects that pack a ton of...

$5.50 AUD, inc GST

This simple board breaks out the pins of a microSD card connector to a 0.1″ pin spacing that is compatible with standard perfboards, solderless breadboards, and 0.1" connectors.

Breakout Board for microSD Card

Brand: Pololu

$8.30 AUD, inc GST

Micro SD Card Extender - 68cm (26 inch) long cable

Stop fiddling with SD card sockets in the back of your latest gadget, and streeeeeeeeeetch out with a Micro SD Card Extender . This simple, but effective device...

$13.90 AUD, inc GST

Round Panel Mount Micro SD Card Extender

If you need to add a panel-mount connection that extends a micro SD card, this Round Panel Mount MicroSD Adapter Plug is the easiest and fastest way to...

$18.65 AUD, inc GST

White Shortening microSD to SD Card Adapter

This short-style white microSD adapter slides in where the SD card goes but is 11mm shorter (excluding the silver lip). This makes it stick out a lot less...

$3.50 AUD, inc GST

microSD Card Holder

Mary Poppins had her TARDIS-like carpet bag. 90s kids had their Pokémon card binders. But we have the next best thing: microSD Holder, a super-slim...

$13.85 AUD, inc GST

The SparkFun Level Shifting microSD Breakout is quite similar to the SparkFun microSD Transflash Breakout, but with the included level shifting hardware, this board allows you to utilize a microSD card at Arduino’s SD library’s top speed on a 5V system. With this small breakout board, that is not much bigger than your fingernail, adding mass storage to your project will never be easier.

SparkFun Level Shifting microSD Breakout

Brand: Sparkfun

$10.85 AUD, inc GST

MicroSD Socket

Add tons of storage to your next project with this micro SD card socket. Adafruit use this part in all Adafruit's designs and it works great with any microSD ('transflash') of...

$3.45 AUD, inc GST

4 Pack MicroSD Exteneders

Brand: Arducam

Extend your uSD slot on your Raspberry Pi or 3D printer.

$25.10 AUD, inc GST

SD to MicroSD Extender - 23cm (9 inch) long cable

Stop fiddling with SD card sockets in the back of your latest gadget, and streeeeeeeeeetch out with an SD Card Extender. This simple, but effective device...

$13.55 AUD, inc GST

SD Card Extender - 68cm (26 inch) long cable

Stop fiddling with SD card sockets in the back of your latest gadget, and streeeeeeeeeetch out with an SD Card Extender . This simple, but effective device gives...

$15.10 AUD, inc GST

microSD Sniffer

Brand: Sparkfun

When playing with microSD, you sometimes need to view what the SPI traffic is doing, whether for hacking or debugging. The microSD Sniffer allows you to hook up an external device, such as a logic analyzer or microcontroller, to view what signals are being passed back and forth. Insert one side into a regular uSD socket and a uSD card into the on-board socket, simple as that.

$22.95 AUD, inc GST

RasPiKey is a 16GB or 32GB (select version above) eMMC module which can be inserted into your Raspberry Pi’s Micro SD card slot. It works like a micro SD...

RasPiKey: Plug And Play EMMC Module For Raspberry Pi - 32GB - 32GB

Brand: The Pi Hut

$70.10 AUD, inc GST

Out of stock

DiMeCard 8 microSD Card Holder

Mary Poppins had her TARDIS-like carpet bag. 90s kids had their Pokémon card binders. But Adafruit have the next best thing: DiMeCard, a super-slim 8-piece microSD storage...

$9.50 AUD, inc GST

Out of stock

microSD and SD Card Holder

Mary Poppins had her TARDIS-like carpet bag. 90s kids had their Pokémon card binders. But we have the next best thing: microSD and SD Card Holder,...

$14.30 AUD, inc GST

This is the new-released SD card V4.0 shield. It provides a storage space for your Arduino. Users can read/write SD card via Arduino's built-in SD library...

SD Card Shield V4 (Seeed Studio)

Brand: Seeed Studio

$28.60 AUD, inc GST

VS1053 Codec + MicroSD Breakout - MP3/WAV/MIDI/OGG Play + Record - v4

This breakout board is the ultimate companion for the VLSI VS1053B DSP codec chip. The VS1053 can decode a wide variety of audio formats such as MP3, AAC, Ogg Vorbis...

$43.40 AUD, inc GST

Breakout board for the microSD socket that is not much bigger than your fingernail. Compatible with the SPI interface found on any SD card, this tiny form factor was created for cell phone storage and is perfect for your next MP3 project! Board comes fully assembled and tested.

Breakout Board for microSD Transflash

Brand: Sparkfun

$9.90 AUD, inc GST

This MicroSD card adapter makes your pi more slimmer. It’s easily to slide in to the Raspberry Pi B, and just is half length than normal SD card. Also...

MicroSD Card Adapter for Raspberry Pi B (Seeed Studio)

Brand: Seeed Studio

$9.20 AUD, inc GST

This 64GB MicroSD Card is preloaded with the Official Raspberry Pi OS. For beginners and first-time users, this higher capacity card will allow for tons of additional space for projects on any Pi!

Similar matches

Raspberry Pi OS 64GB Preloaded uSD Card

Brand: Raspberry Pi

$51.85 AUD, inc GST

Add speedy mega-storage in a jiffy using this 16 GB Class 10 micro-SD card

MicroSD Memory Card - 16GB Class 10

Brand: Core Electronics

$20.20 AUD, inc GST

Official Raspberry Pi 64GB A2-Class micro SD card

Brand: Raspberry Pi

Reliable, fast, and tested storage, ready to go for your Raspberry Pi projects!

$47.50 AUD, inc GST

Raspberry Pi 5 Model B 16GB

Brand: Raspberry Pi

The 16GB Raspberry Pi 5 packs the most power and onboard memory in the Raspberry Pi single-board computer lineup. Ideal for advanced DIY projects, home automation, and high-performance computing tasks.

$497.84 AUD, inc GST