Search results for: 'resistor array'

This is a pack of 600 resistors, all 1%, 1/4 Watt with markings on the paper strips for easy identification.

This assortment of through-hole Resistors comes jam-packed with 500 separate resistors, broken down into 20 of the most common resistance values you'll ever need. The folded sleeve packaging offers a awesome way to keep your collection organised over the course of many projects.

This is a simple, 220 Ohm, 1/4th Watt, +/- 5% tolerance PTH resistor. Sold as single units...

1/4 Watt ±1% Metal Film resistor commonly used for breadboarding and DIY electronics.

1/6th Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards, these 10K resistors make excellent pull-ups, pull-downs, and current limiters. We’ve opted for a new and more breadboard-friendly lead thickness (they’re a bit thicker than our last ones).

These are your run-of-the-mill ¼ Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and other prototyping applications, these 330 ohm resistors make...

OMG! You're not going to be able to resist these handy resistor packs! Well, axially, they do all of the resisting for you! This is a 25 Pack of 100O Resistors...

These are your run-of-the-mill ¼ Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and other prototyping applications, these 1K ohm resistors make...

These are your run-of-the-mill ¼ Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and other prototyping applications, these 10K ohm resistors make...

Always have the right SMT components at your hand with this awesome 0603 Resistor and Capacitor book set! This book has nice translucent pages filled with cut tape...

This pack includes many of the common types of Horizontal Potentiometers.

1K1 1/2W - Same size as standard 1/4W carbon film.

Surface mount device , SMD, resistors are the most widely used electronic component. They're designed to have small metal tabs that could be directly soldered to the surface of the PCB.

OMG! You're not going to be able to resist these handy resistor packs! Well, axially, they do all of the resisting for you! This is a 25 Pack of 1.0KO Resistors...

You don’t have to worry about adding a resistor to an LED if you get an LED with a built in resistor! This pack contains 20x 5mm LEDs in four different colors. There...

FSRs are sensors that allow you to detect physical pressure, squeezing and weight. They are simple to use and low cost. This sensor is a Interlink model 402 FSR...

This is a force sensitive resistor with a round, 0.5" diameter, sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance. When no pressure is being applied to the FSR its resistance will be larger than 1MΩ. This FSR can sense applied force anywhere in the range of 100g-10kg.

These are your run-of-the-mill ¼ Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and other prototyping applications, these 100 ohm resistors make...

These are your run-of-the-mill ¼ Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and other prototyping applications, these 1M ohm resistors make...

2K4 1/2W - Same size as standard 1/4W carbon film.

5K6 1/2W - Same size as standard 1/4W carbon film.

Holy Wattage, Batman! This Power Resistor Kit comes with 5 each of 5 different 10 Watt resistor values including 1, 2, 4, 8, and 16 Ohms. These resistors are capable of dissipating large amounts of power without damaging themselves. This kit is perfect for testing projects that require large amounts of power while only requiring low resistance.

This is a force sensitive resistor with a square, 1.75x1.5", sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance. When no pressure is being applied to the FSR its resistance will be larger than 1MΩ. This FSR can sense applied force anywhere in the range of 100g-10kg.

This very long force sensitive resistor - over 2 feet - has a sensing area of 0.25x24". This FSR from Interlink Electronics will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance. When no pressure is being applied to the FSR its resistance will be larger than 1MΩ. This FSR can sense applied force anywhere in the range of 100g-10kg.

Variable resistors also named as potentiometer are electrical equipments having two terminal points in opposite direction.

0.25W Metal Film Resistor 1% Tolerance. 50ppm temperature coefficient. Pack of 8

75R 1/2W - Same size as standard 1/4W carbon film.

High Power Package.

High Power Package.

Introducing "The Breadboard-Plugin Kit" - the first kit in the ECell series. The Breadboard-Plugin Kit provides a range of common components such as resistors, capacitors, diodes, transistors etc. that are compatible with a solderless breadboard. This resistor package module has gold-plated pins making it solid and durable and also gives it excellent conductivity. It plugs neatly and easily in the breadboard and is both reliable and reusable.