Search results for: 'pick and place machine'
Professional Desktop PCB Holder
Brand: Core Electronics
This fancy and ultra-adjustable PCB holder was recommended to Adafruit by Collin, who is not only a master at soldering but also has impeccable taste in furnishings, so...
$31.25 AUD, inc GST
Arduino Portenta Machine Control
Brand: Arduino
The Portenta Machine Control is a fully-centralized, low-power, industrial control unit able to drive equipment and machinery. It can be programmed using the Arduino framework or other embedded development platforms.
$504.95 AUD, inc GST
Robot Gripper - Extra Width
Brand: DFRobot
This is a 2 DOF robot gripper. A gripper is mostly used for a robot or robotic arm to pick up something? This gripper has bigger clamping range with slotted jaw faces which is able to grip objects tighter.
$17.57 AUD, inc GST
mBot Ultimate Robot Kit V2.0
Brand: Makeblock
10-in-1 classroom robotics kit turns lessons into hands-on building and programming. Progress from block coding to Python as students explore design, creativity and teamwork.
$499.00 AUD, inc GST $589.95
Micro Gripper Kit with Position Feedback Servo
Brand: Pololu
This small gripper uses a rack and pinion design with a servo-driven pinion and opposing racks to keep the gripper paddles synchronized and parallel to...
$50.15 AUD, inc GST
Mechanic-Loader for micro: Maqueen
Brand: DFRobot
Note: Maqueen, micro:bit board and battery are not included. Maqueen Loader includes a set of mechanical parts that can turn Maqueen into a loader. This kit contains...
$17.57 AUD, inc GST
PanaVise Rapid Assembly Circuit Board Holder - 333
Brand: PanaVise
Speed up your production work! For quick circuit board rotation and component insertion/soldering, nothing beats this work holding tool for speed and versatility.
$344.95 AUD, inc GST
Stickvise Part Lifter (pack of 2)
Brand: Adafruit
Stickvise PartLift holds thru-hole parts in place to free up your hands while you solder the legs. A simple yet useful tool to go along with your Stickvise or other PCB holder. It solves the annoying problem of soldering thru-hole parts that can slide down the PCB when its flipped over!
$44.75 AUD, inc GST
Talon Grabber XL PRO for BitBot
Brand: 4tronix
Upgrade your BitBot with the Talon Grabber XL PRO
$26.20 AUD, inc GST
micro: Maqueen with Mechanic-Loader
Brand: DFRobot
Note: We recommend purchasing it with the micro:bit board cause micro:bit board and battery are not included. Maqueen Loader includes a set of mechanical parts that...
$87.87 AUD, inc GST
Stepper Motor with 38cm Lead Screw: Bipolar, 200 Steps/Rev, 42×38mm, 2.8V, 1.7 A/Phase
Brand: Pololu
This NEMA 17-size hybrid bipolar stepping motor has an integrated 38 cm (15") threaded rod as its output shaft, turning it into a linear actuator capable...
$249.95 AUD, inc GST
Stepper Motor with 18cm Lead Screw: Bipolar, 200 Steps/Rev, 42×38mm, 2.8V, 1.7 A/Phase
Brand: Pololu
This NEMA 17-size hybrid bipolar stepping motor has an integrated 18 cm (7″) threaded rod as its output shaft, turning it into a linear actuator capable of precision open-loop positioning. The included traveling nut has four mounting holes and moves 40 µm (1.6 mil) per full step; finer resolution can be achieved with microstepping. The stepper motor has a 1.8° step angle (200 steps/revolution) and each phase draws 1.7 A at 2.8 V, allowing for a holding torque of 3.7 kg-cm (51 oz-in).
$184.95 AUD, inc GST
Stepper Motor with 28cm Lead Screw: Bipolar, 200 Steps/Rev, 42×38mm, 2.8V, 1.7 A/Phase
Brand: Pololu
This NEMA 17-size hybrid bipolar stepping motor has an integrated 28 cm (11″) threaded rod as its output shaft, turning it into a linear actuator capable of precision open-loop positioning. The included traveling nut has four mounting holes and moves 40 µm (1.6 mil) per full step; finer resolution can be achieved with microstepping. The stepper motor has a 1.8° step angle (200 steps/revolution) and each phase draws 1.7 A at 2.8 V, allowing for a holding torque of 3.7 kg-cm (51 oz-in).
$259.95 AUD, inc GST
Stepper Motor: Bipolar, 200 Steps/Rev, 20×30mm, 3.9V, 0.6 A/Phase
Brand: Pololu
This small NEMA 8-size hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 600 mA at 3.9 V, allowing for a holding torque of 180 g-cm (2.5 oz-in). With a weight of 60 g, this is one of the smallest stepper motors Pololu carry.
$91.95 AUD, inc GST
Sanyo Pancake Stepper Motor: Bipolar, 200 Steps/Rev, 42×18.6mm, 5.4V, 1 A/Phase
Brand: Pololu
This pancake bipolar stepping motor from Sanyo has a 1.8° step angle (200 steps/revolution). It offers a holding torque of 1.9 kg-cm (26 oz-in), and each phase draws 1 A at 5.4 V. This stepper motor’s flat profile (25.6 mm including the shaft) allows it to be used in places where more traditional stepper motors would be too bulky.
$159.95 AUD, inc GST
Sanyo Pancake Stepper Motor with Encoder: Bipolar, 200 Steps/Rev, 42×24.5mm, 3.5V, 1 A/Phase, 4000 CPR
Brand: Pololu
This NEMA 17-size pancake bipolar stepping motor from Sanyo features an integrated high-resolution (1000 P/R) quadrature encoder that allows for 4000...
$454.95 AUD, inc GST
Sanyo Pancake Stepper Motor: Bipolar, 200 Steps/Rev, 50×16mm, 5.9V, 1 A/Phase
Brand: Pololu
This pancake bipolar stepping motor from Sanyo has a 1.8° step angle (200 steps/revolution). It offers a holding torque of 2.2 kg-cm (30 oz-in), and each phase draws 1 A at 5.9 V. This stepper motor’s flat profile (21 mm including the shaft) allows it to be used in places where more traditional stepper motors would be too bulky.
$154.95 AUD, inc GST
Similar matches
Stepper Motor: Bipolar, 200 Steps/Rev, 42×38mm, 2.8V, 1.7 A/Phase
Brand: Pololu
This NEMA 17-size hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 1.7 A at 2.8 V, allowing for a holding torque of 3.7 kg-cm (51 oz-in).
$69.40 AUD, inc GST
Small SMD IC Single Hook Clip Grabbers / Test Probe
Brand: Core Electronics
These SMD IC Single Hook Clip Grabbers have a small metal clip which is under spring tension that extends when squeezed. This allows them to be attached to SMD type devices quite easily. There is a round termination hole on the back of the grabber to insert a banana plug or multimeter probe.
$1.15 AUD, inc GST
Flat IC Grabber / SMD IC Hook Clip Grabbers
Brand: Core Electronics
These SMD IC Single Hook Clip Grabbers have a small metal clip which is under spring tension that extends when squeezed. This allows them to be attached to SMD type devices quite easily. There is a termination pin back of the grabber for connection to a test probe.
$1.05 AUD, inc GST
Stepper Motor: Unipolar/Bipolar, 200 Steps/Rev, 42×48mm, 4V, 1.2 A/Phase
Brand: Pololu
This NEMA 17-size hybrid stepping motor can be used as a unipolar or bipolar stepper motor and has a 1.8° step angle (200 steps/revolution). Each phase draws 1.2 A at 4 V, allowing for a holding torque of 3.2 kg-cm (44 oz-in).
$97.65 AUD, inc GST
Large SMD IC Single Hook Clip Grabbers / Test Probe
Brand: Core Electronics
These SMD IC Single Hook Clip Grabbers have a small metal clip which is under spring tension that extends when squeezed. This allows them to be attached to SMD type devices quite easily. There is a round termination hole on the back of the grabber to insert a banana plug or multimeter probe.
$0.37 AUD, inc GST
Stepper Motor: Bipolar, 200 Steps/Rev, 35×28mm, 10V, 0.5 A/Phase
Brand: Pololu
This NEMA 14-size hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 500 mA at 10 V, allowing for a holding torque of 1 kg-cm (14 oz-in).
$56.70 AUD, inc GST
Stepper Motor: Unipolar/Bipolar, 200 Steps/Rev, 57×56mm, 7.4V, 1 A/Phase
Brand: Pololu
This NEMA 23-size hybrid stepping motor can be used as a unipolar or bipolar stepper motor and has a 1.8° step angle (200 steps/revolution). Each phase draws 1 A at 7.4 V, allowing for a holding torque of 9 kg-cm (125 oz-in).
$214.95 AUD, inc GST
Stepper Motor: Unipolar/Bipolar, 200 Steps/Rev, 57×41mm, 5.7V, 1 A/Phase
Brand: Pololu
This NEMA 23-size hybrid stepping motor can be used as a unipolar or bipolar stepper motor and has a 1.8° step angle (200 steps/revolution). Each phase draws 1 A at 5.7 V, allowing for a holding torque of 4 kg-cm (55 oz-in).
$139.95 AUD, inc GST
Stepper Motor: Bipolar, 200 Steps/Rev, 35×36mm, 2.7V, 1 A/Phase
Brand: Pololu
This NEMA 14-size hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 1 A at 2.7 V, allowing for a holding torque of 1.4 kg-cm (20 oz-in).
$89.10 AUD, inc GST
Stepper Motor: Unipolar/Bipolar, 200 Steps/Rev, 57×76mm, 4.5V, 2 A/Phase
Brand: Pololu
This NEMA 23-size hybrid stepping motor can be used as a unipolar or bipolar stepper motor and has a 1.8° step angle (200 steps/revolution). Each phase draws 2 A at 4.5 V, allowing for a holding torque of 14 kg-cm (190 oz-in).
$289.95 AUD, inc GST
Stepper Motor: Bipolar, 200 Steps/Rev, 20×42mm, 4.3V, 0.8 A/Phase
Brand: Pololu
This small NEMA 8-size hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 800 mA at 4.3 V, allowing for a...
$124.95 AUD, inc GST
Stepper Motor: Bipolar, 200 Steps/Rev, 35×26mm, 7.4V, 0.28 A/Phase
Brand: Pololu
This NEMA 14-size hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 280 mA at 7.4 V, allowing for a holding torque of 650 g-cm (9 oz-in).
$74.10 AUD, inc GST
Stepper Motor: Unipolar/Bipolar, 200 Steps/Rev, 57×76mm, 8.6V, 1 A/Phase
Brand: Pololu
This NEMA 23-size hybrid stepping motor can be used as a unipolar or bipolar stepper motor and has a 1.8° step angle (200 steps/revolution). Each phase draws 1 A at 8.6 V, allowing for a holding torque of 14 kg-cm (190 oz-in).
$289.95 AUD, inc GST
Sanyo Pancake Stepper Motor with Encoder: Bipolar, 200 Steps/Rev, 42×31.5mm, 5.4V, 1 A/Phase, 4000 CPR
Brand: Pololu
This NEMA 17-size pancake bipolar stepping motor from Sanyo features an integrated high-resolution (1000 P/R) quadrature encoder that allows for 4000...
$464.95 AUD, inc GST
Sanyo Pancake Stepper Motor: Bipolar, 200 Steps/Rev, 50×11mm, 4.5V, 1 A/Phase
Brand: Pololu
This pancake bipolar stepping motor from Sanyo has a 1.8° step angle (200 steps/revolution). It offers a holding torque of 1 kg-cm (14 oz-in), and each phase draws 1 A at 4.5 V. This stepper motor’s flat profile (16 mm including the shaft) allows it to be used in places where more traditional stepper motors would be too bulky.
$139.95 AUD, inc GST
Stepper Motor: Bipolar, 200 Steps/Rev, 57×56mm, 2.5V, 2.8 A/Phase
Brand: Pololu
This NEMA 23-size hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 2.8 A at 2.5 V, allowing for a holding torque of 13 kg-cm (180 oz-in).
$239.95 AUD, inc GST
Stepper Motor: Bipolar, 200 Steps/Rev, 28×32mm, 3.8V, 0.67 A/Phase
Brand: Pololu
This NEMA 11-size hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 670 mA at 3.5 V, allowing for a holding torque of 600 g-cm (8.3 oz-in).
$79.70 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.