Search results for: 'ph'
Gravity: Analog pH Sensor/Meter Kit V2
Brand: DFRobot
DFRobot Gravity: Analog pH meter V2 is specifically designed to measure the pH of the solution and reflect the acidity or alkalinity. It is commonly used in various...
$67.05 AUD, inc GST
Gravity: Analog pH Sensor / Meter Pro Kit V2
Brand: DFRobot
DFRobot Gravity: Analog pH meter pro V2 is specifically designed to measure the pH of the solution and reflect the acidity or alkalinity. It is commonly used in...
$109.95 AUD, inc GST
MODBUS-RTU RS485 4-in-1 Soil Moisture, Temperature, pH & EC Sensor (IP68, 5-30V)
Brand: DFRobot
The integrated 4-in-1 soil tester is an IP68-rated sensor for soil temperature, moisture, pH, and EC monitoring. Ideal for agriculture, environmental...
$114.95 AUD, inc GST
Industrial pH Electrode - Armor Casing
Brand: DFRobot
This pH combination electrode is made of sensitive glass membrane with low impedance.It can be used in a variety of PH measurements with fast response, good thermal stability.It has the good reproducibility, difficult to hydrolysis, and basically eliminate the alkali error .In 0 to 14pH range,the output voltage of the electrode is linear.The reference system which consist of the Ag/AgCl gel electrolyte salt bridge has a stable half-cell potential and excellent anti-pollution performance.The ring PTFE membrane is not easy to be clogged, so the electrode is suitable for long-term online detection.
$92.05 AUD, inc GST
Grove - PH Sensor Kit (E-201C-Blue )
Brand: Seeed Studio
This is an easy to use and cost-effect PH sensor/meter, suitable for Arduino and Raspberry Pi, support 3.3V and 5V system...
$45.10 AUD, inc GST
Gravity: Analog Spear Tip pH Sensor / Meter Kit (for Soil and Food Applications)
Brand: DFRobot
This spear tip pH sensor/meter kit can directly stab into semisolid material to measure the pH value. It can be used to measure pH value of wet soil and various...
$169.95 AUD, inc GST
MODBUS-RTU RS485 Soil EC and pH Monitoring Sensor (IP68, 5-30V)
Brand: DFRobot
The 2-in-1 integrated soil sensor features reliable soil pH and EC monitoring. Ideal for agriculture and soil data collection. Compatible with Arduino UNO...
$104.95 AUD, inc GST
MODBUS-RTU RS485 Soil Temperature, Humidity and pH Monitoring Sensor (IP68, 5-30V)
Brand: DFRobot
The soil sensor delivers precise readings of soil temperature, moisture, and pH. It transmits data using MODBUS-RTU protocol via RS485 and is built for...
$98.35 AUD, inc GST
Gravity: Analog ORP Sensor PRO
Brand: DFRobot
As an upgraded version of industrial Gravity: ORP Sensor Meter For Arduino, this new generation ORP probe employs platinum indicator electrode and...
$224.95 AUD, inc GST
Similar matches
JST PH Cable (4-Pos JST PH, MH-FC to MH-FC, 600mm Length)
Brand: goBilda
This 600mm length 4-Pos JST cable has female connectors at both ends for conveying data between electronics in your project. It is the same.....
$5.30 AUD, inc GST
JST-PH Battery Extension Cable - 500mm
Brand: Adafruit
By popular demand, Adafruit now have a handy extension cord for all of Adafruit's JST-terminated battery packs (such as Adafruit's LiIon/LiPoly and 3xAAA holders). One end has a JST-PH...
$3.80 AUD, inc GST
JST PH to Breadboard Jumper (3-pin)
Brand: Sparkfun
This is a simple jumper adapter cable that comes pre-terminated with a female JST connector on one end and a breadboard hookup pigtail on the other. This cable makes it easy to connect components with a JST connector to a breadboard or an Arduino-based device’s pins.
$2.95 AUD, inc GST
JST PH-Style Cable, 2-Pin, Female-Female, 25cm
Brand: Pololu
This 2-conductor, 25 cm (10") cable has 24 AWG wires and 2-pin female JST PH-type connectors (2mm pitch) on both ends...
$2.80 AUD, inc GST
3-Pin Female JST PH-Style Cable for Sharp Distance Sensors (30cm)
Brand: Pololu
This 12-inch (30-cm) cable has 26 AWG wires and a 3-pin female JST PH-style connector that mates with the connector on 3-pin Sharp analog distance sensors. The other ends of the wires are unterminated; they can be cut to length to match your application. The wire color scheme matches the Sharp distance sensor pinout: red for power, black for ground, and white for signal.
$3.25 AUD, inc GST
JST PH-Style Cable, 6-Pin, Female-Female, 10cm
Brand: Pololu
This 6-conductor, 10 cm (4") cable has 24 AWG wires and 6-pin female JST PH-type connectors (2mm pitch) on both ends...
$5.40 AUD, inc GST
JST PH-Style Cable, 5-Pin, Female-Female, 10cm
Brand: Pololu
This 5-conductor, 10 cm (4") cable has 24 AWG wires and 5-pin female JST PH-type connectors (2mm pitch) on both ends...
$4.70 AUD, inc GST
Breakout for JST PH-Style Connector, 4-Pin Male Top-Entry, with SH
Brand: Pololu
This simple board serves as an adapter between a JST PH-style 4-pin, top-entry connector and breadboard-compatible 0.1"-pitch through holes. The PH...
$2.80 AUD, inc GST
Adafruit JST PH Remover / Puller for LiPoly / LiIon Batteries
Brand: Adafruit
Here's a great accessibility tool for removing Lipoly batteries with a JST connector from your board. Maybe you've got bigger hands or a gorgeous...
$3.70 AUD, inc GST
JST PH-Style Cable, 4-Pin, Female-Female, 63cm
Brand: Pololu
This 4-conductor, 63 cm (25") cable has 24 AWG wires and 4-pin female JST PH-type connectors (2mm pitch) on both ends...
$7.10 AUD, inc GST
Breakout for JST PH-Style Connector, 2-Pin Male Top-Entry, with SH
Brand: Pololu
This simple board serves as an adapter between a JST PH-style 2-pin, top-entry connector and breadboard-compatible 0.1"-pitch through holes. The PH...
$2.50 AUD, inc GST
Breakout for JST PH-Style Connector, 6-Pin Male Top-Entry, with SH
Brand: Pololu
This simple board serves as an adapter between a JST PH-style 6-pin, top-entry connector and breadboard-compatible 0.1"-pitch through holes. The PH...
$3.20 AUD, inc GST
Gravity: PH3 Sensor (Calibrated) - I2C & UART
Brand: DFRobot
The factory-calibrated phosphine sensor has a variety of signal output methods to meet various communication needs...
$424.95 AUD, inc GST
JST PH Cable (3-Pos JST PH, MH-FC to MH-FC, 300mm Length)
Brand: goBilda
Let there be lights…that are linked to one another! When your build needs a legion of lumens, a JST extension (like this 300mm length.....
$5.05 AUD, inc GST
JST PH-Style Cable, 3-Pin, Female-Female, 10cm
Brand: Pololu
This 3-conductor, 10 cm (4") cable has 24 AWG wires and 3-pin female JST PH-type connectors (2mm pitch) on both ends...
$2.95 AUD, inc GST
3-Pin Female JST PH-Style Cable (30 cm) with Male Pins for 0.1" Housings
Brand: Pololu
This 12-inch (30-cm) cable has 26 AWG wires with a 3-pin female JST PH-style connector that mates with the connector on 3-pin Sharp analog distance sensors. The other ends of the wire are terminated with male pins for 0.1" housing. The wire color scheme matches the Sharp distance sensor pinout: red for power, black for ground, and white for signal.
$4.95 AUD, inc GST
PH2.0-3P Male-to-Male Cable – 10cm (10 Pack)
Brand: DFRobot
10cm PH2.0-3P male-to-male cable with polarized connectors prevents reverse wiring. Ideal for Boson modules, UNIHIKER, and STEM/IoT projects. 10pcs per...
$8.15 AUD, inc GST
3-Pin Female JST PH-Style Cable (30 cm) with Female Pins for 0.1" Housings
Brand: Pololu
This 12-inch (30-cm) cable has 26 AWG wires and a 3-pin female JST PH-style connector that mates with the connector on 3-pin Sharp analog distance sensors. The other ends of the wire are terminated with female pins for 0.1" housing. The wire color scheme matches the Sharp distance sensor pinout: red for power, black for ground, and white for signal.
$4.95 AUD, inc GST
PH2.0-3P Cable F/F (10 Pack)
Brand: DFRobot
What do you do if you find that the line length is not enough when you do a project with Boson Kit? Or you find out the interface of Boson module is not matched...
$8.55 AUD, inc GST
Breakout for JST PH-Style Connector, 3-Pin Male Side-Entry, with SH
Brand: Pololu
This simple board serves as an adapter between a JST PH-style 3-pin, side-entry connector and breadboard-compatible 0.1"-pitch through holes. The PH...
$2.70 AUD, inc GST
Breakout for JST PH-Style Connector, 5-Pin Male Side-Entry, with SH
Brand: Pololu
This simple board serves as an adapter between a JST PH-style 5-pin, side-entry connector and breadboard-compatible 0.1"-pitch through holes. The PH...
$2.95 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.