Search results for: 'oscillator module'

This is a SX1262 LoRa Node Module For Raspberry Pi Pico with LoRaWAN Support

Weight Sensor Module is based on HX711, which is a precision 24-bit analog-to-digital convertor designed for weight scale and industrial control applications to interface directly with a bridge sensor. It not only has a few basic functions, but also contains high integration, fast response, immunity, and other features. This weight sensor lowers the cost of the electronic scale, and at the same time improving the performance and reliability. The input interface is compatible with Arduino I/O port. The output adopts compact terminal that makes the sensor easier to connect. It's the best choose for electronic enthusiast to do some tiny home scale.

PDIP-8 Package.

Get with the times, already! This SparkFun Real Time Clock (RTC) Module is a Qwiic-enabled breakout board for the RV-1805 chipset. The RTC is ultra-low power (running...

The littleBits random module has two modes: "noise" and "random voltage". In "noise" mode, it outputs white noise, like a television set not tuned to any channel. In "random voltage" mode, it outputs random voltage signals that can control oscillators and make them play random pitches. Use the "trigger out" connector and "speed" dial of the micro sequencer to set the timing of the random output pulses and use an input Bits module like a dimmer to control the range of your random outputs.

The filter has the most effect on the sound’s character or “timbre”. It affects the timbre by changing the relative volume of certain frequencies in the sound. Use it to give the impression that a sound is “brighter" (more high frequencies) or “darker” (more low frequencies.)

The real-time clock RTC breakout module employs the SD3031 chip with an integrated crystal oscillator and temperature compensator and a built-in 70-byte...

The keyboard lets you play melodies- it features 13 switches that make up an entire octave of notes. It has two modes: "press" (which only produces output when you press a switch) and "hold" (which will hold the last note you played). It also features an octave control which changes the playable range. In addition to its main output, which is great for controlling littleBits oscillators, it also has a "trigger out", which you can send to the "trigger in" of envelope or other littleBits modules.

The datasheet for the DS3231 explains that this part is an "Extremely Accurate I²C-Integrated RTC/TCXO/Crystal". And, hey, it does exactly what it says on the tin!...

The SparkFun MicroMod DA16200 Function Board adds a fully integrated WiFi module to any MicroMod project...

The littleBits split module sends a single input to two wired outputs. It's great for connecting one output to two inputs, like using a keyboard to control two oscillators. But keep in mind that it can be used just like a wire module if you ignore one of its outputs.

This is the best battery-backed real time clock (RTC) you can get that allows your Raspberry Pi project to keep track of time if the power is lost. Perfect for data-logging...

Sipeed Tang Nano FPGA board powered by GW1N-1 FPGA board carries a low power core chip GW1N-1-LV, this chip has 1152 LUT4 RAM, 864 FF(Flip-Flop), 72K...

The littleBits mix module allows you to combine two inputs and send them to a single output. It also has a volume control for each of its inputs -- that's where the 'mixing' comes in. Use it to play two oscillators on a single speaker!

At the heart of our Timing GNSS Breakout is Septentrio's mosaic-T, a compact, ultra-low power, multi-band, multi-constellation, high-precision GNSS timing...

Do you want to control your TV via a web-browser? Want to ask Alexa to mute your stereo? Want to schedule triggers to your IR-controlled LED strip? These are all...

The oscillator is the main sound source in the Synth Kit and is capable of creating audio tones that will be used in almost every sound experiment you create. It features a "pitch" knob to adjust its output tone and a "tune" dial for adjusting the tuning when using with the keyboard. It also features a mode switch that selects between "square" and "saw" waveforms. The "square" waveform has a rich, powerful character, and the "saw" waveform has a more mellow, rounder character. [You'll often use it after the Keyboard or Micro Sequencer Bits modules, but you can have lots of fun by just twisting the pitch knob and "sweeping" through all the frequencies from high to low pitches.]

The green SparkFun Qwiic Alphanumeric Display allows you to display all sorts of numbers, characters, and symbols. With Qwiic, simply plug it in and go...

The ESP32-WROOM-DA module achieves high-quality, wireless connectivity across large areas, using two complementary PCB antennas in different directions...

This breakout board is a "three in one" product:The ATtiny817 is part of the 'next gen' of AVR microcontrollers, and now we have a cute...

Good stability and far more accurate than MCU internal oscillators.

The micro sequencer sends out voltages based on the position of each of the four “step” knobs. Connect it to an oscillator and it will step through the "sequence" consecutively to make a melody (The LEDs tell you which step is active). Turn a knob all the way counter-clockwise to make the step silent. Use it in "speed" mode to set the speed using the dial, or flip the switch to “step” mode to use an input module like a pulse or button for control. In addition to its main output, it also has a trigger output, which you can send to any of your other Bits modules.

The purple SparkFun Qwiic Alphanumeric Display allows you to display all sorts of numbers, characters, and symbols. With Qwiic, simply plug it in and go...

The RTC module is a member of Twig. It is based on the clock chip DS1307 which supports the I2C protocol. It uses a Lithium cell battery (CR1225). The...

The pyboard D-series is a compact, powerful and low-power microcontroller module that runs MicroPython. The SF2W model has a 216MHz CPU, 256k RAM and integrated WiFi/Bluetooth capabilities.

ESP32-S2-MINI-1 is a powerful, generic WiFi-MCU module that has a rich set of peripherals. It can be applied in a wide variety of scenarios relating to wearable...

The Arducam HM01B0 is a camera module designed specifically for the Raspberry Pi Pico featuring ultra-low power consumption, up to QVGA resolution, 1-bit...

Aww yeah, it's the Feather you have been waiting for, this time with pre-assembled headers! The HUZZAH32 is Adafruit's ESP32-based Feather, made with the official WROOM32...

ESP32-C3-WROOM-02 is a universal Wi-Fi and low-power Bluetooth LE module. The rich set of peripherals and small size make the two modules an ideal choice...

The IoT RedBoard is an ESP32 WROOM-equipped development board that has everything you need in an Arduino Uno with extra perks like USB-C, Qwiic, and more...

The ESP8266 started a small revolution by bringing WiFi to a small and cheap package that also had enough processing power and enough pins to get small things done. Then the ESP32 came out with tons of pins, Bluetooth support, and dual 240 MHz cores. Now get ready to take your IoT designs to the next level with the ESP32-S2-WROOM WiFi Module!

The SparkFun Red Vision Camera Board - HM01B0 is a breakout board for the HM01B0 320 x 320 color camera module from Himax©. The Camera Board breaks out...

ESP32-S2-DevKitM-1 is an entry-level development board equipped with ESP32-S2-MINI-1 module. Most of the I/O pins on the module are broken out to the pin headers...

ESP32-S2-Saola-1 is a small-sized ESP32-S2-based development board. Most of the I/O pins are broken out to the pin headers on both sides for easy interfacing. Developers...

The white SparkFun Qwiic Alphanumeric Display allows you to display all sorts of numbers, characters, and symbols. With Qwiic, simply plug it in and go...

Digital potentiometer is also called "Digital Pot" in short. It is a kind of mixed signal IC, which is able to dynamically change the internal resistors through...

Build your own smart home, industrial automation, and IoT data loggers with ESP32-C6-DevKitM-1 Development Board. Buy now and transform your IoT projects...

Ding dong! Hear that? It's the PiCowbell ringing, letting you know that the new Adafruit PiCowbell OV5640 Camera Breakout with 120-Degree Lens and...

The red SparkFun Qwiic Alphanumeric Display allows you to display all sorts of numbers, characters, and symbols. With Qwiic, simply plug it in and go...