Search results for: 'mounting board'

50 results

DINrPlate Universal - PCB DIN Rail Mount

Brand: Core Electronics
The DINrPlate Universal is an innovative universal DIN Rail mounting solution with sliding, rotating standoffs allowing it to accommodate a wide range of...
$32.40 AUD, inc GST

littleBits Mounting Boards

Brand: LittleBits
Mounting boards come 2 to a pack and allow you to keep your circuit intact and move it around with ease! Simply snap together your littleBits circuit and press the feet of your modules into the holes of the mounting board.
$34.95 AUD, inc GST

littleBits XL Mounting Board

Brand: LittleBits

Sphero's educational STEM robots and STEAM kits introduce kids 5+ to coding concepts, programming, and circuitry through play-based learning.

$34.95 AUD, inc GST

Adafruit Swirly Aluminum Mounting Grid for 0.1" Spaced PCBs - 5x5

Brand: Adafruit
With most of our dev boards, sensors and feathers now sporting plug-and-play stemma QT ports it can be very fast to put together projects with half a...
$8.25 AUD, inc GST

Adafruit Swirly Aluminum Mounting Grid for 0.1" Spaced PCBs - 2x10

Brand: Adafruit
With most of our dev boards, sensors and feathers now sporting plug-and-play stemma QT ports it can be very fast to put together projects with half a...
$7.95 AUD, inc GST

SSD and HDD Mounting Board for re_computer case (Seeed Studio)

Brand: Seeed Studio
This is the re_computer case - 2.5 inch SSD/HDD Hard Drive Mounting Board suitable for re_computer case. This works perfectly with re_computer case Stackable Frame and makes it look neat whilst adding one 2.5inch hard drive to the set-up.
$7.50 AUD, inc GST

Arduino and Breadboard Holder

Brand: SparkFun
We’ve been prototyping for a long time on these awesome little plastic plates but it’s time for an upgrade. This version still holds an Arduino and a self-adhesive clear breadboard but we’ve done away with the plastic clips and now provide screws which give you a more solid and simple connection. Also, because the outside dimensions of the board don’t matter anymore, this plate can be used with any board that has the Arduino mounting holes. The Arduino Uno, The Leonardo, FEZ Panda even the Electric Sheep can all be screwed down to the base plate for easy prototyping. You can even mount the board facing either way you like.
$13.40 AUD, inc GST

Adafruit Swirly Aluminum Mounting Grid for 0.1" Spaced PCBs

Brand: Adafruit
With most of our dev boards, sensors and feathers now sporting plug-and-play stemma QT ports it can be very fast to put together projects with half a...
$11.45 AUD, inc GST

Adafruit Feather Mount for LEGO-Compatible Brick Systems

Brand: Adafruit
Add your favorite Adafruit development board to your next brick-build with the Adafruit Feather Mount for LEGO-Compatible Brick Systems. This does exactly...
$2.95 AUD, inc GST

Adafruit Swirly Aluminum Mounting Grid for 0.1" Spaced PCBs - 10x10

Brand: Adafruit
With most of our dev boards, sensors and feathers now sporting plug-and-play stemma QT ports it can be very fast to put together projects with half a...
$17.70 AUD, inc GST

Plastic mounting plate for breadboard and Arduino - rubber feet!

Brand: Adafruit
By popular demand! Adafruit now have the plates from the ARDX available separately. Acrylic plate is engraved and cut here at the Adafruit factory. There are mounting...
$14.05 AUD, inc GST

Adafruit FunHouse Mounting Plate and Yellow Brick Stand

Brand: Adafruit
Here is the perfect kit for your FunHouse, with a wall-mounting plate that can be attached onto the back of the 'House. This kit also includes a set of yellow bricks for customizing how you prop up your FunHouse. And of course, the mounting hardware is included, so you can assemble it with just a plain screwdriver. Takes less than 3 minutes!
$10.90 AUD, inc GST

DIN Rail Generic PCB Holder - 50x80mm

Brand: Adafruit
What is this, an open boxcar for train traveling ants? It's actually a PCB-or-really-anything holder for all the makers and designers who use DIN railing in their...
$10.15 AUD, inc GST

Mount for the RockBLOCK 9704 - SMA

Brand: SparkFun
This lightweight plastic mounting plate is designed specifically for the RockBLOCK 9704 SMA, providing an easy and secure way to integrate the device...
$33.85 AUD, inc GST

Pololu RP5/Rover 5 Expansion Plate RRC07B (Wide) Transparent Gray

Brand: Pololu
This expansion plate for the Rover 5 tracked chassis is made of 1/8" (3mm) acrylic. The numerous 3 mm wide slots give you the flexibility to mount components in a variety of orientations almost anywhere on the plate.
$20.85 AUD, inc GST

Pololu RP5/Rover 5 Expansion Plate RRC07A (Narrow) Solid Black

Brand: Pololu
This expansion plate for the Rover 5 tracked chassis is made of 1/8" (3mm) acrylic. The numerous 3 mm wide slots give you the flexibility to mount components in a variety of orientations almost anywhere on the plate.
$12.75 AUD, inc GST

Pololu RP5/Rover 5 Expansion Plate RRC07B (Wide) Solid White

Brand: Pololu
This expansion plate for the Rover 5 tracked chassis is made of 1/8" (3mm) acrylic. The numerous 3 mm wide slots give you the flexibility to mount components in a variety of orientations almost anywhere on the plate.
$20.75 AUD, inc GST

Professional Solderless Breadboard BB830 - 830 tie points (Metal Backing Plate)

BreadBoard-830 is a solderless (plug-in) breadboard with 830 connection tie-points (i.e. 830 wire insertion holes). It has 4 power rails.
$11.64 AUD, inc GST

Professional Solderless Breadboard BB400 - 400 tie points (Metal Backing Plate)

BreadBoard-400 is a solderless (plug-in) breadboard with 400 connection tie-points (i.e. 400 wire insertion holes). It has 4 power rails.
$9.34 AUD, inc GST

Makerverse M3 Mounting Kit

Brand: Core Electronics
Mount your project onto support material up to 3mm thick.
$3.20 AUD, inc GST

Black Nylon Screw and Stand-off Set – M2.5 Thread

Brand: Adafruit
Totaling 380 pieces, this M2.5 Screw Set is a must-have for your workstation. You'll have enough screws, nuts, and hex standoffs to fuel your maker tendencies for...
$35.30 AUD, inc GST

KKSB Snap-On Raspberry Pi DIN Rail Mount

Brand: KKSB
Mount your Raspberry Pi 5, 4B, or 3B securely on standard DIN rails with KKSB's tool-free mounting bracket, perfect for industrial control cabinets and educational setups.
$11.60 AUD, inc GST

10 sets M3 * 10 nylon standoff

Brand: DFRobot
These screw can be used to isloate your circuit board. It is suitable for all kinds of circuit boards, sensors, mechanical mounting.
$2.37 AUD, inc GST

White Nylon Screw and Mounting Kit -M2

Brand: DFRobot
The mounting kit is an M2 screw set with screws, nuts and a variety of lengths of single-head, double-pass white nylon columns, for a total of 260 pieces. The M2-size...
$16.56 AUD, inc GST

Mounting Kit (Screws and Nuts)

Brand: DFRobot
This mounting kit provides you different types of screws and nuts which are most commonly used in DFRobot's projects here at DFRobot. We use them to mount circuit boards and help build robots.
$19.67 AUD, inc GST

KKSB DIN Rail Mount Kit with Screws

Brand: KKSB
Mount your KKSB cases securely with this black aluminum DIN rail mount clip, compatible with 35mm Top Hat Rails and featuring pre-drilled holes plus included mounting screws for easy installation.
$8.65 AUD, inc GST

M3 Mounting Kit (Standoffs)

Brand: DFRobot

This M3 mounting kit provides you with different types of standoffs with screws and nuts which are most commonly used in DFRobot's projects. We use them to mount circuit boards and help build robots.

$39.74 AUD, inc GST

Professional Desktop PCB Holder

Brand: Core Electronics

This fancy and ultra-adjustable PCB holder was recommended to Adafruit by Collin, who is not only a master at soldering but also has impeccable taste in furnishings, so...

$31.25 AUD, inc GST

KKSB Universal Jetson DIN Rail Mount

Brand: KKSB
Transform your NVIDIA Jetson development boards (Nano, Orin, Xavier NX) into industrial solutions with KKSB's universal DIN rail mount bracket, designed for secure 35mm DIN rail installations in professional environments.
$13.55 AUD, inc GST

10 sets M3 * 50 hexagonal standoffs mounting kit

Brand: DFRobot
Suitable for all kinds of circuit boards, sensors, mechanical support of the installation. They are great for building a multi-level robot chassis.
$7.71 AUD, inc GST

KKSB Industrial Arduino DIN Rail Mount

Brand: KKSB
Mount Arduino boards securely on 35mm DIN rails with KKSB's industrial mounting bracket, compatible with UNO R4 WiFi, UNO R3, Mega, and Giga boards for professional control cabinet installations.
$12.75 AUD, inc GST

GlowBit Matrix Mounting Kit

Brand: Core Electronics
Mount your matrix to support material up to 3mm thick.
$4.40 AUD, inc GST

10 sets M3 * 6 nylon screws

Brand: DFRobot
These screw can be used to isloate your circuit board. It is suitable for all kinds of circuit boards, sensors, mechanical mounting.
$2.22 AUD, inc GST

Tower Mount Enclosure 4x Raspberry Pi

Brand: Core Electronics
Now you can mount and display your own Raspberry Pi stack for use as a server / cluster / processing farm.
$24.60 AUD, inc GST

1222 Series Flat Pattern Mount (1-1)

Brand: goBILDA
This Flat Pattern Mount is able to fasten to a part which has threaded holes on the 16mm pattern, leaving the screw heads flush with the...
$11.80 AUD, inc GST

Board Edge Mounting Kit - Pack of 4

Brand: Adafruit
Having difficulty attaching a PCB? This kit is especially useful when there are no mounting holes - as with the original Raspberry Pi. Instead of gluing, taping...
$5.95 AUD, inc GST

VESA Mounting Plate for The Pi Hut Cases

Brand: The Pi Hut
A VESA Mounting plate designed for use with a number of our own Raspberry Pi 4 cases, allowing you to mount your case to the rear of a VESA monitor. The...
$6.50 AUD, inc GST

KKSB Case Mounting Bracket with Tripod Thread

Brand: KKSB
Mount your KKSB case securely on any tripod with this 14-20 UNC thread bracket, compatible with KKSB cases for Raspberry Pi 5, Arduino, Jetson, and other single-board computers.
$8.65 AUD, inc GST

1221 Series 2-Side, 2-Post Pattern Mount (32-2)

Brand: goBILDA
These pattern mounts allow you to space parallel components 32mm apart while providing a mounting surface perpendicular to those...
$10.95 AUD, inc GST

DIN Rail Mount Bracket for Raspberry Pi / BeagleBone / Arduino

Brand: Adafruit
This one's going out to all the makers and designers who use DIN railing in their builds. This adapter plate is perfect for simplifying complex wiring. It's pretty...
$49.40 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.