Search results for: 'm3 mounting hardware'

These universal aluminum mounting hubs allow you to mount custom wheels and mechanisms to 4 mm diameter motor shafts. The set includes two hubs, two M3 set screws for securing the hubs to motor shafts, and one 1.5 mm Allen wrench for use with the set screws. Each hub has four threaded mounting holes for M3 screws (not included).

You have a stepper motor, but you need to attach it to your CNC project, eh? Not so easy if you don't have a stepper motor mount just like this fine one one here!...

This 210 piece brass standoff kit insures you'll always have a set handy...

This black anodized aluminum bracket lets you securely mount typical NEMA 14-size stepper motors to your project. The bracket features several slots and...

These lightweight aluminum brackets make it easy to mount and integrate the Sharp GP2Y0A02, GP2Y0A21, and GP2Y0A41 Distance Sensors into your project. The brackets are strong enough to hold their position, but they can also be bent by hand to different angles if the application calls for it. These brackets, which allow for a low-profile parallel sensor orientation, are sold in pairs, and four M3 screws and nuts are included for securing sensors to the brackets.

The versatile Monitor One IP67 enclosure now for the deployment of Particle's Tachyon and Muon products, as well as any Raspberry Pi projects…

This mount allows you to fasten a NEMA 14 motor to any goBILDA component that contains the 16mm pattern. The included M3 socket head screws.....

If you missed out on AdaBox016, it's not too late for you to pick up the parts necessary to build many of the projects! It doesn't come with tissue paper or the nifty extras, but it does have all the electronic goodies you need.

The DINrPlate Universal is an innovative universal DIN Rail mounting solution with sliding, rotating standoffs allowing it to accommodate a wide range of...

This panel mount USB-C extension cable enables you to more easily enclose a project that contains a USB-C port. The cable is 6" in length and includes two 14mm M3...

You have a TT motor, but you need to attach it to your CNC project, eh? Not so easy if you don't have an L-Bracket DC Motor Mount just like this fine one here! Made...

This is the re_computer case - 2.5 inch SSD/HDD Hard Drive Mounting Board suitable for re_computer case. This works perfectly with re_computer case Stackable Frame and makes it look neat whilst adding one 2.5inch hard drive to the set-up.

The ZIP Tile is an 8 x 8 display panel for the BBC micro:bit featuring 64 addressable full-colour LEDs. They can be connected together to form larger displays.

This machined aluminum gearmotor bracket lets you securely mount Pololu’s 37D mm metal gearmotors to your project. The six holes on the bracket face line up with the six mounting holes on the 37D gearbox, and the bracket features three tapped M3 holes on the bottom that can be used to mount it to a surface. The bracket includes nine M3 screws: three for mounting the bracket to a surface and six for mounting it to the gearmotor.

These encoders are designed for DFRobot 3PA and AWD Rovers. They can give you the rotation degree of the wheels. Encoder use a non-contact method to convert the angular displacement signals. Best fit with Micro DC Geared Motor.

These versatile white plastic wheels have silicone tires and measure 80 mm (3.15") in diameter. What makes them special is the included set of...

Coming soon! Extend and expand your Circuit Playground projects with a bolt on TFT Gizmo that lets you add a lovely color display in a sturdy and reliable fashion...

The Study Pack of HUSKYLENS for micro:bit is an HuskyLens extension kit based on micro:bit programming. It is suitable for students aged 8-19. Centered...

Get your 'bot rolling with this durable and smooth steel ball caster. Adafruit like the size (not too big, not too small) and surprisingly fluid motion of this caster...

The GP2Y0A60SZ distance sensor from Sharp offers a wide detection range of 4″ to 60″ (10 cm to 150 cm) and a high update rate of 60 Hz. The distance is indicated by an analog voltage, so only a single analog input is required to interface with the module. The sensor ships installed on Pololu's compact carrier board, which makes it easy to integrate this great sensor into your project, and is configured for 3V mode.

Here is a chic minimalist enclosure for your CLUE board! This case has been laser-cut specifically to accommodate the TFT display, tactile buttons, and capacitive pads.

These red plastic wheels press-fit onto the 3mm D shafts on many of Pololu's motors, including Pololu's micro metal gearmotors and Pololu's plastic gearmotors with 3mm D-shafts, to make a nice drive solution for small robots. The wheels have silicone tires and measure 70 mm (2.75″) in diameter. Two additional mounting holes for 4-40 screws make it possible to use the wheel with several of Pololu's universal mounting hubs. The wheels are sold in pairs.

DSS-M15 is a heavy-duty metal gear standard servo with 180°wide angle, high torque power, improved stability and durability.

This black anodized aluminum bracket lets you securely mount typical NEMA 17-size stepper motors to your project. The bracket features several slots and holes for a wide variety of mounting solutions, and four M3×6mm screws are included for securing the motor to the bracket.

This motor mount is able to fasten to the face of a 5201 Series Gear.....

This track set includes a pair of 30-tooth silicone tracks, two red drive sprockets measuring 35 mm (1.4") in diameter, and two matching idler sprockets...

These are Philips-head M3 screws. They are 12mm long and come in packs of three. This is the screw size that the MiP robotic Platform and its add-on boards uses. Check below for the associated hardware.

Wintertime can be rough in the city. The sky is gray. The weather is unpredictable. So slough off those seasonal blues with some Times...

UCTRONICS Separate enclosure for Raspberry Pi Rackmount Complete Enclosure Version 2.0 UCTRONICS Separate enclosure for Raspberry Pi Rackmount Complete...

Unify Enclosure Solar IP65 are modular-rated outdoor enclosures that include tailored features to support WisBlock Base Boards and WisBlock Modules, but...

This is a really easy use prototyping plate. Basically you can put everything from Arduino board to sensors, even a motor on top of it. It fits M2-M3 screws.

This track set includes a pair of 22-tooth silicone tracks, two black drive sprockets measuring 35 mm (1.4") in diameter, and two matching idler sprockets...

These 17 mm long aluminum adapters convert a 4 mm diameter shaft to a 12 mm hex shaft that is compatible with many common hobby RC wheels. The set includes two adapters, two M4 screws for securing wheels to the adapters, four M3 set screws for securing the adapters to motor shafts, and one 1.5 mm Allen wrench for use with the set screws.

Get compatibility and versatility all in one motor mount. The Quad Block Motor Mount contains many different hole patterns in order to work.....

Totaling 420 pieces, this M3 Screw Set is a must-have for your workstation. You'll have enough screws, nuts, and hex standoffs to fuel your maker tendencies for days on end!

Got a glorious RGB Matrix project you want to mount and display in your workspace or home? If you have one of the matrix panels listed below, you'll need a pack of these Mini-Magnet Feet. Adafruit got these specifically for Adafruit's RGB LED Matrices, which no longer include mounting equipment. At 16.6mm long, these magnet-screws slot perfectly into the panel mounting holes.

Keep your BBC micro:bit safe by using this mountable version of the MI:pro Protector Case for the BBC micro:bit. This case has been specifically designed with portability and expansion in mind and is compatible with both the original micro:bit V1 and the new micro:bit V2.