Search results for: 'm2 screw kit'

50 results

White Nylon Screw and Mounting Kit -M2

Brand: DFRobot
The mounting kit is an M2 screw set with screws, nuts and a variety of lengths of single-head, double-pass white nylon columns, for a total of 260 pieces. The M2-size...
$16.56 AUD, inc GST

Metal Screw Nut and Mounting Kit -M2

Brand: DFRobot
The mounting kit is an M2 screw set with screws, nuts and a variety of lengths of single-head, double-pass hexagonal copper columns, for a total of 320 pieces. The...
$22.32 AUD, inc GST

Panel Mount Kit for Raspberry Pi Camera Module 3

Brand: The Pi Hut
We've lost count of how many times we've tried to mount a camera module onto a panel or enclosure but struggled to drill the very small M2 holes right at...
$6.45 AUD, inc GST

GlowBit Matrix Mounting Kit

Brand: Core Electronics
Mount your matrix to support material up to 3mm thick.
$4.40 AUD, inc GST

Computer Repair Screw and Standoff Kit

Brand: Adafruit
The Computer Repair Screw and Standoff Kit contains all those bits and pieces that get lost whenever installing stuff into your computer or electronics...
$32.45 AUD, inc GST

Leopard Imaging Camera Mounting Hardware Kit

Brand: SparkFun
This hardware kit consists of 4 each of M2 style nylon hex nuts and screws. It is designed for use with the Leopard Imaging Camera, but can be used for other mountings...
$2.15 AUD, inc GST
Similar matches

Heat set insert kit (M2-M6, 300pcs total)

Brand: Core Electronics

A miscellaneous pack of threaded inserts to find your favourite size. Add robust threads to your thermoplastic creations!

$26.40 AUD, inc GST

Machine Screw: M2.5, 6mm Length, Phillips (25-pack)

Brand: Pololu

Secure parts of your project with these philips head 6mm, M2.5 screws

$3.10 AUD, inc GST

Makerverse M3 Mounting Kit

Brand: Core Electronics
Mount your project onto support material up to 3mm thick.
$3.20 AUD, inc GST

Machine Screw: M3, 8mm Length, Phillips (25-pack)

Brand: Pololu
This M3, pan-head screw is 8 mm long. It is made from steel, is zinc-plated, and comes in packs of 25.
$4.40 AUD, inc GST

24-in-1 Precision Screwdriver Kit

Brand: Core Electronics

Make sure every screw is tight with this great value screwdriver kit!

$7.60 AUD, inc GST

Makerverse Load Cell Screw Kit - M4

Brand: Makerverse

Secure your project with four 16mm countersunk M4 screws.

$3.20 AUD, inc GST

White Nylon Screw and Stand-off Set – M2.5 Thread

Brand: Adafruit
Totaling 420 pieces, this White Nylon M2.5 Screw Set is a must-have smörgåsbord for your workstation. You'll have more than enough screws, nuts, and hex standoffs...
$31.40 AUD, inc GST

Black Nylon Screw and Stand-off Set – M2.5 Thread

Brand: Adafruit
Totaling 380 pieces, this M2.5 Screw Set is a must-have for your workstation. You'll have enough screws, nuts, and hex standoffs to fuel your maker tendencies for...
$35.30 AUD, inc GST

Machine Screw: M3, 12mm Length, Phillips (25-pack)

Brand: Pololu
This M3, pan-head screw is 12 mm long. It is made from steel, is zinc-plated, and comes in packs of 25...
$4.85 AUD, inc GST

Machine Screw: M3, 10mm Length, Phillips (25-pack)

Brand: Pololu
This M3, pan-head screw is 10 mm long. It is made from steel, is zinc-plated, and comes in packs of 25.
$4.30 AUD, inc GST

Machine Screw: M3, 5mm Length, Phillips (25-pack)

Brand: Pololu
This M3, pan-head screw is 5 mm long. It is made from steel, is zinc-plated, and comes in packs of 25.
$3.25 AUD, inc GST

10 sets M3x10 screw low profile hex head cap screw

Brand: DFRobot
These are M3 hex head cap screw, which provides a more secure way to install circuit boards, sensors and mechanical mounting.
$1.27 AUD, inc GST

Black Nylon Screw and Stand-off Set – M3 Thread

Brand: Adafruit
Totaling 420 pieces, this M3 Screw Set is a must-have for your workstation. You'll have enough screws, nuts, and hex standoffs to fuel your maker tendencies for days on end!
$36.20 AUD, inc GST

M3 Mounting Kit (Standoffs)

Brand: DFRobot

This M3 mounting kit provides you with different types of standoffs with screws and nuts which are most commonly used in DFRobot's projects. We use them to mount circuit boards and help build robots.

$39.74 AUD, inc GST

10 sets M3x6 screw low profile hex head cap screw

Brand: DFRobot
These are M3 hex head cap screw, which provides a more secure way to install circuit boards, sensors and mechanical mounting.
$1.27 AUD, inc GST

Pololu Ball Caster with 1/2" Plastic Ball

Brand: Pololu
This light ball caster uses a 1/2" diameter plastic ball. The height of the assembled kit ranges from 0.5" to 0.8".
$4.90 AUD, inc GST

Machine Screw: M3, 6mm Length, Phillips (25-pack)

Brand: Pololu
This M3, pan-head screw is 6 mm long. It is made from steel, is zinc-plated, and comes in packs of 25...
$3.50 AUD, inc GST

10 sets M3x12 screw low profile hex head cap screw

Brand: DFRobot
These are M3 hex head cap screw, which provides a more secure way to install circuit boards, sensors and mechanical mounting.
$1.27 AUD, inc GST

10 sets M3x16 screw low profile hex head cap screw

Brand: DFRobot
These are M3 hex head cap screw, which provides a more secure way to install circuit boards, sensors and mechanical mounting.
$1.27 AUD, inc GST

10 sets M3x30 screw low profile hex head cap screw

Brand: DFRobot
These are M3 hex head cap screw, which provides a more secure way to install circuit boards, sensors and mechanical mounting.
$2.67 AUD, inc GST

10 sets M3 * 6 nylon screws

Brand: DFRobot
These screw can be used to isloate your circuit board. It is suitable for all kinds of circuit boards, sensors, mechanical mounting.
$2.22 AUD, inc GST

Pololu Basic SPDT Relay Carrier with 12VDC Relay (Partial Kit)

Brand: Pololu
The Pololu basic relay carrier modules allow simple control of a single-pole, double-throw (SPDT) switch from low-voltage, low-current control signals. This item includes the basic carrier PCB along with an Omron G5LE-14-DC12 12 V relay, 5.0 mm terminal blocks, and 0.1" male headers in straight and right-angle versions. Surface-mount components are pre-assembled on the PCB, but the through-hole components are not installed. The included power relay is rated for up to 10 A under most conditions.
$13.20 AUD, inc GST

10 sets M3x20 screw low profile hex head cap screw

Brand: DFRobot
These are M3 hex head cap screw, which provides a more secure way to install circuit boards, sensors and mechanical mounting.
$1.27 AUD, inc GST

10 sets M3 * 8 mounting screws

Brand: DFRobot
These screws can be used to install your circuit board, sensors and mechanical mounting.
$1.27 AUD, inc GST

Machine Screw: #2-56, 5/16" Length, Phillips (25-pack)

Brand: Pololu
This #2-56, pan-head screw is 5/16" long. It is made from steel, is zinc-plated, and comes in packs of 25.
$3.40 AUD, inc GST

Machine Screw: M3, 20mm Length, Phillips (25-pack)

Brand: Pololu
This M3, pan-head screw is 20 mm long. It is made from steel, is zinc-plated, and comes in packs of 25...
$5.90 AUD, inc GST

Pololu Ball Caster with 3/4" Metal Ball

Brand: Pololu
This light ball caster uses a 3/4" diameter metal ball. The height of the assembled kit ranges from 0.8" to 1.1".
$8.20 AUD, inc GST

Pololu Ball Caster with 3/4" Plastic Ball

Brand: Pololu
This light ball caster uses a 3/4" diameter plastic ball. The height of the assembled kit ranges from 0.9" to 1.2". Dowel pins are used to minimize the friction between the ball and the ABS housing.
$8.65 AUD, inc GST

Machine Screw: #2-56, 3/16″ Length, Phillips (25-pack)

Brand: Pololu
This #2-56, pan-head screw is 3/16″ (0.1875″) long. It is made from steel, is zinc-plated, and comes in packs of 25.
$3.20 AUD, inc GST

Pololu RC Switch with Relay (Assembled)

Brand: Pololu
This RC relay enables easy control of large, electrically isolated loads in radio control (RC) systems. The activation threshold and direction are configurable, and a safe-start feature reduces the likelihood of unexpected activation. This assembled version ships with the 5V relay, terminal block, and straight male header pins soldered in, so it can be integrated into hobby RC systems without the need for additional soldering. The included power relay is an Omron G5LE-14-DC5 and is rated for up to 10 A under most conditions.
$30.15 AUD, inc GST

Pololu Ball Caster with 1" Plastic Ball

Brand: Pololu
This light ball caster uses a 1" diameter plastic ball. The height of the assembled kit ranges from 1.1" to 1.4". Dowel pins are used to minimize the friction between the ball and the ABS housing.
$12.10 AUD, inc GST

M4 Button Head Screw Assortment Pack

Brand: goBILDA
Button head screws have a sleek rounded head profile with a 2.5mm hex drive. They also provide a bit more contact patch than socket head screws making them an excellent choice on softer materials.
$97.40 AUD, inc GST

Machine Screw: M3, 16mm Length, Phillips (25-pack)

Brand: Pololu
This M3, pan-head screw is 16 mm long. It is made from steel, is zinc-plated, and comes in packs of 25...
$6.55 AUD, inc GST

Romi Chassis Kit - Blue

Brand: Pololu
The versatile Romi chassis is a great starting point for your next mobile robot. This kit includes all the basic mechanical parts to get up and running,...
$72.70 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.