Search results for: 'jst-xh connector kit'
JST connector Kit (2.54mm)
Brand: DFRobot
This kit includes JST XHP-2, XHP-3 and XHP-4 housing (20 units each), through-hole type shrouded header (20 units each) and crimp contact (100 units).
$11.60 AUD, inc GST
JST-XH 2.54mm Pitch Connector Kit - 560 Piece Kit
Brand: Adafruit
Totaling 560 pieces, this JST-XH Connector Kit is a must-have for your workstation. You'll have enough sockets and headers to fuel your maker tendencies for days...
$56.50 AUD, inc GST
2.5mm Pitch 3-pin Cable Matching Pair - JST XH Compatible
Brand: Adafruit
These solid 2.5mm pitch connector cable pairs are great when you need something that can carry a couple amps of current, easy to connect and disconnect, and is just-about 0.1" pitch compatible.
$1.90 AUD, inc GST
2.5mm Pitch 6-pin Cable Matching Pair - JST XH compatible
Brand: Adafruit
These solid 2.5mm pitch connector cable pairs are great when you need something that can carry a couple amps of current, easy to connect and disconnect, and is just-about 0.1" pitch compatible.
$3.10 AUD, inc GST
2-Pin Female JST XH-Style Cable (15cm)
Brand: Pololu
This 6" (15cm) cable has two 26AWG conductors with a 2.5mm-pitch 2-pin female JST XH-style connector. The spacing is very close to 0.1", which means this connector will work with 0.1" male header pins and standard perfboards and solderless breadboards. The other ends of the wires are unterminated; they can be cut to length to match your application. The red and black wires are twisted together to reduce noise.
$3.30 AUD, inc GST
4-Pos JST PH [MH-FC] to 4-Pos JST XH [MH-FC] Adaptor (600mm Length)
Brand: goBilda
This 600mm Length JST adaptor is able to plug into the encoder found on 5000 Series Motors and 52xx Series Gear Motors, using the JST XH.....
$4.95 AUD, inc GST
Similar matches
JST connector Kit (2.0mm)
Brand: DFRobot
This kit includes PHR-2，PHR-3 and PHR-4 housing (20 units each)， through-hole type shrouded header （20 units each）and crimp contact (100 units).
$11.15 AUD, inc GST
JST-PH Jumper 2 Wire Assembly
Brand: Sparkfun
This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST connector on one end, bare cable on the opposite end. It also comes with the mating connector for the JST.
$2.20 AUD, inc GST
JST Right-Angle Connector - Through-Hole 2-Pin
Brand: Sparkfun
This is a 2-pin, through-hole PH series JST connector. The pins are spaced by 2mm.
$1.85 AUD, inc GST
2.5 mm JST XH-Style Shrouded Male Connector: 2-Pin, Right Angle (4-Pack)
Brand: Pololu
These shrouded, 2-pin JST XH-style male connectors have right-angle leads and match the female connector on the 2-pin female XH-style cable, and they also work with other many other 0.1″-pitch female connectors, such as Pololu's female premium jumper wires. They are sold in packs of four units.
$2.95 AUD, inc GST
2.5mm Pitch 2-pin Cable Matching Pair - JST XH compatible
Brand: Adafruit
These solid 2.5mm pitch connector cable pairs are great when you need something that can carry a couple amps of current, easy to connect and disconnect, and is just-about 0.1" pitch compatible.
$1.95 AUD, inc GST
2.5mm Pitch 4-pin Cable Matching Pair - JST XH compatible
Brand: Adafruit
These solid 2.5mm pitch connector cable pairs are great when you need something that can carry a couple amps of current, easy to connect and disconnect, and is just-about 0.1" pitch compatible.
$2.10 AUD, inc GST
JST-XH Extension Cable - 2.5mm Pitch - 500mm long
Brand: Adafruit
We now have a handy extension cord for JST-XH projects! One end has a JST-XH socket, and the other has a matching plug. Between the two, 500mm of...
$2.70 AUD, inc GST
2.5mm Pitch 5-pin Cable Matching Pair - JST XH compatible
Brand: Adafruit
These solid 2.5mm pitch connector cable pairs are great when you need something that can carry a couple amps of current, easy to connect and disconnect, and is just-about 0.1" pitch compatible.
$2.20 AUD, inc GST
JST 2-pin cable
Brand: Adafruit
Red and black tinned wires with a 2-pin JST PH connector on the end. 4" / 100mm long. Matches up nicely with Adafruit's Lipoly charger! Adafruit don't have the 'mating' version...
$1.30 AUD, inc GST
JST PH 2-Pin Cable – Male Header 200mm
Brand: Adafruit
For a really long time Adafruit assumed that the JST PH didn't have a free-hanging male header version. But then Adafruit found this JST-PH 2-pin Male Cable, and Adafruit were like...
$1.60 AUD, inc GST
JST GH 1.25mm Pitch 6 Pin Cable - 100mm long
Brand: Adafruit
This cable is a little over 100mm / 4" long and fitted with JST-GH compatible 6-pin connectors on either end. We dig the solid and compact nature of...
$1.95 AUD, inc GST
JST SH 1mm Pitch 3 Pin to Socket Headers Cable - 100mm long
Brand: Adafruit
If you're fancying to connect to the debug port on a Pico WH, or the two ports on a Pico Debug Probe or anything else with a JST SH compatible 3-pin...
$2.90 AUD, inc GST
JST PH 3-Pin Plug to Male Header Cable - 200mm
Brand: Adafruit
This cable will let you turn a JST PH 3-pin cable port into 3 individual wires with high-quality 0.1" male header plugs on the end. Adafruit are carrying these to match...
$2.60 AUD, inc GST
JST SH Jumper 4 Wire Assembly - 8"
Brand: Sparkfun
This is a simple four wire cable. Great for jumping from board to board or just about anything else. These cables mate with the connectors listed below. They have bare wires on one end and a 4-pin JST SH connector on the other end with a mating socket.
$3.80 AUD, inc GST
2-pin JST SM Plug + Receptacle Cable Set
Brand: Adafruit
These 2-wire cables are 16cm long and come as a set. One side has a 2-pin JST SM type connector plug on the end. The other side has a matching 2-pin JST SM type...
$1.60 AUD, inc GST
2.5 mm JST XH-Style Shrouded Male Connector: 2-Pin, Straight (4-Pack)
Brand: Pololu
These shrouded, 2-pin JST XH-style male connectors have straight leads and match the female connector on the 2-pin female XH-style cable, and they also work with other many other 0.1″-pitch female connectors, such as Pololu's female premium jumper wires. They are sold in packs of four units.
$2.80 AUD, inc GST
JST SH-Style Cable, 2-Pin, Female-Female, 25cm
Brand: Pololu
This 2-conductor, 25 cm (10") cable has 28 AWG wires and 2-pin female JST SH-type connectors on both ends...
$2.60 AUD, inc GST
Breakout for JST PH-Style Connector, 6-Pin Male Top-Entry, with SH
Brand: Pololu
This simple board serves as an adapter between a JST PH-style 6-pin, top-entry connector and breadboard-compatible 0.1"-pitch through holes. The PH...
$3.20 AUD, inc GST
JST PH 4-pin Vertical Connector (10-pack) - STEMMA
Brand: Adafruit
Designing boards with plug-n-play connectivity is a snap, with STEMMA connectors. Here's a pack of 10 of Adafruit's favorite 2mm pitch connector - the JST PH 4 pin. These...
$6.65 AUD, inc GST
2.5 mm JST XH-Style Shrouded Male Connector: 5-Pin, Right Angle Extended (2-Pack)
Brand: Pololu
These shrouded, 5-pin JST XH-style male connectors have extended right-angle leads. They can be used with female JST XH-style connectors, and they also work with other many other 0.1″-pitch female connectors, such as Pololu's female premium jumper wires. They are sold in packs of two units.
$2.90 AUD, inc GST
4-Pos JST PH [MH-FC] to 4-Pos JST XH [MH-FC] Adaptor (300mm Length)
Brand: goBilda
This 300mm Length JST adaptor is able to plug into the encoder found on 5000 Series Motors and 52xx Series Gear Motors, using the JST XH Series end.
$4.95 AUD, inc GST
JST-PH Jumper 4 Wire Assembly
Brand: Sparkfun
This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST connector on one end, bare cable on the opposite end. It also comes with the mating connector for the JST.
$3.50 AUD, inc GST
JST SH 4-pin Cable with Alligator Clips - STEMMA QT / Qwiic
Brand: Adafruit
This cable will make it super easy to use Adafruit's plug-and-play STEMMA QT boards with boards like Circuit Playground. On one end you get a Qwiic / STEMMA QT connector...
$6.15 AUD, inc GST
JST-PH Jumper 3 Wire Assembly
Brand: Sparkfun
This is a simple three wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST-PH connector on one end, bare cable on the opposite end. It also comes with the mating connector for the JST.
$3.30 AUD, inc GST
JST SH-Style Cable, 4-Pin, Female-Female, 63cm
Brand: Pololu
This 4-conductor, 63 cm (25") cable has 28 AWG wires and 4-pin female JST SH-type connectors on both ends...
$6.75 AUD, inc GST
Breakout for JST PH-Style Connector, 2-Pin Male Top-Entry, with SH
Brand: Pololu
This simple board serves as an adapter between a JST PH-style 2-pin, top-entry connector and breadboard-compatible 0.1"-pitch through holes. The PH...
$2.50 AUD, inc GST
Breakout for JST PH-Style Connector, 4-Pin Male Top-Entry, with SH
Brand: Pololu
This simple board serves as an adapter between a JST PH-style 4-pin, top-entry connector and breadboard-compatible 0.1"-pitch through holes. The PH...
$2.80 AUD, inc GST
4-pin JST SM Plug + Receptacle Cable Set
Brand: Adafruit
These 4-wire cables are 15cm long and come as a set, one side has a JST SM type connector plug on the end. The other side has a matching JST SM type receptacle connector...
$3.60 AUD, inc GST
5-pin JST SM Plug + Receptacle Cable Set
Brand: Adafruit
These 5-wire cables are 168mm (6.6") long and come as a set. One cable has a JST SM type connector plug on the end. The other cable has a matching JST SM type receptacle...
$3.95 AUD, inc GST
2.5 mm JST XH-Style Shrouded Male Connector: 5-Pin, Straight (2-Pack)
Brand: Pololu
These shrouded, 5-pin JST XH-style male connectors have straight leads. They can be used with female JST XH-style connectors, and they also work with other many other 0.1″-pitch female connectors, such as Pololu's female premium jumper wires. They are sold in packs of two units.
$2.95 AUD, inc GST
4-Pos JST PH [MH-FC] to 4-Pos JST XH [MH-FC] Adaptor (150mm Length)
Brand: goBilda
This 150mm Length JST adaptor is able to plug into the encoder found on 5000 Series Motors and 52xx Series Gear Motors, using the JST XH.....
$4.90 AUD, inc GST
JST Right-Angle Connector - SMD 2-Pin (Black)
Brand: Sparkfun
This is a two pin, compact surface mount JST connector...
$1.75 AUD, inc GST
JST SH Jumper 6 Wire Assembly - 8"
Brand: Sparkfun
This is a simple six wire cable. Great for jumping from board to board or just about anything else. These cables mate with the connectors listed below. They have bare wires on one end and a 6-pin JST SH connector on the other end with a mating socket.
$3.80 AUD, inc GST
JST-PH 2-Pin SMT Right Angle Connector
Brand: Adafruit
A simple 2-pin connector that is compatible with the "JST PH 2-pin" connector - perfect for soldering to the bottom of Adafruit's 3.3V Logic Trinket and 5V Logic Trinket!...
$1.45 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.