Search results for: 'jst-sh 1.0mm 8-pin connector'

This 4-wire cable is a little over 150mm / 6" long and fitted with JST-SH female 4-pin connectors on one end and premium Dupont male headers on the other. Compared...

Red and black tinned wires with a 2-pin JST PH connector on the end. 4" / 100mm long. Matches up nicely with Adafruit's Lipoly charger! Adafruit don't have the 'mating' version...

Totally 220 pieces, this JST-PH Connector Kit is a must-have for your workstation. You'll have enough sockets and plugs to fuel your maker tendencies for days on...

This 4-wire cable is a little over 100mm / 4" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH these are 1mm pitch...

This 4-wire cable is a little over 200mm / 7.8" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH these are 1mm...

These solid 2.0mm pitch connector cable pairs are great when you need something that can carry a couple of amps of current and are easy to connect and disconnect.

Are you a maker in the midst of a STEMMA dilemma? This 200mm long 4-wire cable is a fantastic chimera-cable fitted with STEMMA QT / Sparkfun Qwiic JST SH on one...

If you're fancying to connect to the debug port on a Pico WH, or the two ports on a Pico Debug Probe or anything else with a JST SH compatible 3-pin...

These simple boards serve as adapters between a JST SH-style 4-pin male connector and breadboard-compatible 0.1"-pitch through holes. They work with our...

This simple board serves as an adapter between a JST SH-style 6-pin male connector and breadboard-compatible 0.1"-pitch through holes. It works with our ...

This 30 cm (12") cable has six 28 AWG wires and a 6-pin female JST SH-type connector that works with our Micro Metal Gearmotor Encoders with top-entry...

This simple board serves as an adapter between a JST PH-style 4-pin, top-entry connector and breadboard-compatible 0.1"-pitch through holes. The PH...

These simple boards serve as adapters between a JST SH-style 3-pin male connector and breadboard-compatible 0.1"-pitch through holes. They work with our...

These simple boards serve as adapters between a JST SH-style 5-pin male connector and breadboard-compatible 0.1"-pitch through holes. They work with our...

These simple boards serve as adapters between a JST SH-style 2-pin male connector and breadboard-compatible 0.1"-pitch through holes. They work with our...

These simple boards serve as adapters between a JST SH-style 4-pin male connector and breadboard-compatible 0.1"-pitch through holes.

This simple board serves as an adapter between a JST SH-style 6-pin male connector and breadboard-compatible 0.1"-pitch through holes. It works with our ...

This simple board serves as an adapter between a JST SH-style 6-pin male connector and breadboard-compatible 0.1"-pitch through holes. It works with our ...

This 2-conductor, 25 cm (10") cable has 28 AWG wires and 2-pin female JST SH-type connectors on both ends...

This product includes 2-pin 2.0mm mating connector housing(10 units) and crimp pins (20 units).

Here is a six pin vertical 1.0mm pitch connector. It is useful if you need something very tiny as a connection. These are not the standard JST type connectors we use on most of our boards, but are actually the much smaller JST-SH type.

This simple board serves as an adapter between a JST PH-style 6-pin, top-entry connector and breadboard-compatible 0.1"-pitch through holes. The PH...

This simple board serves as an adapter between a JST PH-style 3-pin, side-entry connector and breadboard-compatible 0.1"-pitch through holes. The PH...

This simple board serves as an adapter between a JST SH-style 6-pin male connector and breadboard-compatible 0.1"-pitch through holes. It works with our ...

This 4-conductor, 63 cm (25") cable has 28 AWG wires and 4-pin female JST SH-type connectors on both ends...

This 2-conductor, 30 cm (12") cable has 28 AWG wires and a 2-pin female JST SH-type connector on one end. The other ends of the wires are unterminated;...

Here is a tiny 4-pin Qwiic 1mm JST connector. This connector is used on all of our Qwiic-based boards and can be used to create your own I2C-based device compatible...

This is a simple four wire cable. Great for jumping from board to board or just about anything else. These cables mate with the connectors listed below. They have bare wires on one end and a 4-pin JST SH connector on the other end with a mating socket.

This simple board serves as an adapter between a JST PH-style 2-pin, top-entry connector and breadboard-compatible 0.1"-pitch through holes. The PH...

This cable will make it super easy to use our plug-and-play STEMMA QT boards and controllers with chips, breakouts, and other devices that are I2C compatible but don't come with a STEMMA QT socket already on 'em.

This 4-conductor, 75 cm (30") cable has 28 AWG wires and a 4-pin female JST SH-type connector on one end. The other ends of the wires are unterminated;...

This is a simple six wire cable. Great for jumping from board to board or just about anything else. These cables mate with the connectors listed below. They have bare wires on one end and a 6-pin JST SH connector on the other end with a mating socket.

Here is a six pin horizontal 1.0mm pitch connector. It is useful if you need something very tiny as a connection. These are not the standard JST type connectors we use on most of our boards, but are actually the much smaller JST-SH type. Check the drawing below.

If you're a DIY enthusiast who likes to micro-manage your project's connections, here is a 10-pack of some micro JST SH connectors! They're solid plastic with 4...

If you're a DIY enthusiast who likes to micro-manage your project's connections, here is a 10-pack of some micro JST SH connectors! They're solid plastic with 4...

If you're fancying to connect to the debug port on a Pico WH, or the two ports on a Pico Debug Probe or anything else with a JST SH compatible 3-pin...

These simple boards serve as adapters between a JST SH-style 2-pin male connector and breadboard-compatible 0.1"-pitch through holes.

This simple board serves as an adapter between a JST PH-style 5-pin, side-entry connector and breadboard-compatible 0.1"-pitch through holes. The PH...

Flexible white JST-SH cables, ideal for using with our Grow soil moisture sensors.