Search results for: 'jst xh 2.54mm 2-pin connector'

50 results

2.5 mm JST XH-Style Shrouded Male Connector: 2-Pin, Right Angle (4-Pack)

Brand: Pololu
These shrouded, 2-pin JST XH-style male connectors have right-angle leads and match the female connector on the 2-pin female XH-style cable, and they also work with other many other 0.1″-pitch female connectors, such as Pololu's female premium jumper wires. They are sold in packs of four units.
$2.95 AUD, inc GST

2.5 mm JST XH-Style Shrouded Male Connector: 2-Pin, Straight (4-Pack)

Brand: Pololu
These shrouded, 2-pin JST XH-style male connectors have straight leads and match the female connector on the 2-pin female XH-style cable, and they also work with other many other 0.1″-pitch female connectors, such as Pololu's female premium jumper wires. They are sold in packs of four units.
$2.80 AUD, inc GST

JST connector Kit (2.54mm)

Brand: DFRobot
This kit includes JST XHP-2, XHP-3 and XHP-4 housing (20 units each), through-hole type shrouded header (20 units each) and crimp contact (100 units).
$11.60 AUD, inc GST

2.5mm Pitch 2-pin Cable Matching Pair - JST XH compatible

Brand: Adafruit
These solid 2.5mm pitch connector cable pairs are great when you need something that can carry a couple amps of current, easy to connect and disconnect, and is just-about 0.1" pitch compatible.
$1.95 AUD, inc GST

JST-XH 2.54mm Pitch Connector Kit - 560 Piece Kit

Brand: Adafruit
Totaling 560 pieces, this JST-XH Connector Kit is a must-have for your workstation. You'll have enough sockets and headers to fuel your maker tendencies for days...
$56.50 AUD, inc GST

2-Pin Female JST XH-Style Cable (15cm)

Brand: Pololu
This 6" (15cm) cable has two 26AWG conductors with a 2.5mm-pitch 2-pin female JST XH-style connector. The spacing is very close to 0.1", which means this connector will work with 0.1" male header pins and standard perfboards and solderless breadboards. The other ends of the wires are unterminated; they can be cut to length to match your application. The red and black wires are twisted together to reduce noise.
$3.30 AUD, inc GST
Similar matches

JST 2-pin cable

Brand: Adafruit
Red and black tinned wires with a 2-pin JST PH connector on the end. 4" / 100mm long. Matches up nicely with Adafruit's Lipoly charger! Adafruit don't have the 'mating' version...
$1.30 AUD, inc GST

JST-PH 2-Pin SMD Connector (Side Entry)

Add a power connector to your SMD PCB designs with this  JST-PH 2-pin compatible connector...

$0.26 AUD, inc GST

JST connector Kit (2.0mm)

Brand: DFRobot
This kit includes PHR-2,PHR-3 and PHR-4 housing (20 units each), through-hole type shrouded header (20 units each)and crimp contact (100 units).
$11.15 AUD, inc GST

JST-PH 2 Pin Female Connector

Brand: DFRobot
This product includes 2-pin 2.0mm mating connector housing(10 units) and crimp pins (20 units).
$1.20 AUD, inc GST

Breakout for JST PH-Style Connector, 2-Pin Male Top-Entry, with SH

Brand: Pololu
This simple board serves as an adapter between a JST PH-style 2-pin, top-entry connector and breadboard-compatible 0.1"-pitch through holes. The PH...
$2.50 AUD, inc GST

2.5mm Pitch 3-pin Cable Matching Pair - JST XH Compatible

Brand: Adafruit
These solid 2.5mm pitch connector cable pairs are great when you need something that can carry a couple amps of current, easy to connect and disconnect, and is just-about 0.1" pitch compatible.
$1.90 AUD, inc GST

JST SH 4-Pin to Premium Male Headers Cable - Qwiic Compatible - 150mm Long

Brand: Adafruit
This 4-wire cable is a little over 150mm / 6" long and fitted with JST-SH female 4-pin connectors on one end and premium Dupont male headers on the other. Compared...
$1.95 AUD, inc GST

2.5mm Pitch 4-pin Cable Matching Pair - JST XH compatible

Brand: Adafruit
These solid 2.5mm pitch connector cable pairs are great when you need something that can carry a couple amps of current, easy to connect and disconnect, and is just-about 0.1" pitch compatible.
$2.10 AUD, inc GST

2.5mm Pitch 6-pin Cable Matching Pair - JST XH compatible

Brand: Adafruit
These solid 2.5mm pitch connector cable pairs are great when you need something that can carry a couple amps of current, easy to connect and disconnect, and is just-about 0.1" pitch compatible.
$3.10 AUD, inc GST

2.5mm Pitch 5-pin Cable Matching Pair - JST XH compatible

Brand: Adafruit
These solid 2.5mm pitch connector cable pairs are great when you need something that can carry a couple amps of current, easy to connect and disconnect, and is just-about 0.1" pitch compatible.
$2.20 AUD, inc GST

2.0mm Pitch 4-pin Cable Matching Pair - JST PH Compatible

Brand: Adafruit
These solid 2.0mm pitch connector cable pairs are great when you need something that can carry a couple of amps of current and are easy to connect and disconnect.
$2.10 AUD, inc GST

2.0mm Pitch 5-pin Cable Matching Pair - JST PH Compatible

Brand: Adafruit
These solid 2.0mm pitch connector cable pairs are great when you need something that can carry a couple of amps of current and are easy to connect and disconnect.
$2.25 AUD, inc GST

JST GH 1.25mm Pitch 6 Pin Cable - 100mm long

Brand: Adafruit
This cable is a little over 100mm / 4" long and fitted with JST-GH compatible 6-pin connectors on either end. We dig the solid and compact nature of...
$1.95 AUD, inc GST

JST PH 3-Pin Plug to Male Header Cable - 200mm

Brand: Adafruit
This cable will let you turn a JST PH 3-pin cable port into 3 individual wires with high-quality 0.1" male header plugs on the end. Adafruit are carrying these to match...
$2.60 AUD, inc GST

JST PH 4-Pin to Male Header Cable - I2C STEMMA Cable - 200mm

Brand: Adafruit
This cable will let you turn a JST PH 4-pin cable port into 3 individual wires with high-quality 0.1" male header plugs on the end. Adafruit are carrying these to match...
$3.30 AUD, inc GST

40-Pin 2.54mm Round Male Pin Header

Brand: Core Electronics

Great for low-profile designs or prototyping with DIP IC's.

$1.40 AUD, inc GST

JST-XH Extension Cable - 2.5mm Pitch - 500mm long

Brand: Adafruit
We now have a handy extension cord for JST-XH projects! One end has a JST-XH socket, and the other has a matching plug. Between the two, 500mm of...
$2.70 AUD, inc GST

JST SH 4-Pin Cable - Qwiic Compatible - 100mm Long

Brand: Adafruit
This 4-wire cable is a little over 100mm / 4" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH these are 1mm pitch...
$1.90 AUD, inc GST

2.0mm Pitch 6-pin Cable Matching Pair - JST PH Compatible

Brand: Adafruit
These solid 2.0mm pitch connector cable pairs are great when you need something that can carry a couple of amps of current and are easy to connect and disconnect.
$2.35 AUD, inc GST

Barrel Jack to 2-pin JST PH 2mm

Brand: Sparkfun

Two pin JST PH 2mm connector to a 2.1x 5.5mm barrel jack, 6.25 inch long jumper cable. We use this cable to adapt from a wall power supply to a relatively small, SMD JST connector. We found that many of the SMD connectors used for battery charging were too large or were not capable of through-putting the current we wanted for faster charging. This setup, with a SMD JST connector and wall power supply, can handle up to 2A!

$6.10 AUD, inc GST

2.0mm Pitch 3-pin Cable Matching Pair - JST PH Compatible

Brand: Adafruit
These solid 2.0mm pitch connector cable pairs are great when you need something that can carry a couple of amps of current and are easy to connect and disconnect.
$2.20 AUD, inc GST

Breakout for JST SH-Style Connector, 4-Pin Male Side-Entry (2-Pack)

Brand: Pololu
These simple boards serve as adapters between a JST SH-style 4-pin male connector and breadboard-compatible 0.1"-pitch through holes.
$3.20 AUD, inc GST

JST PH-Style Cable with Female Pins for 0.1" Housings, 2-Pin, 12cm

Brand: Pololu
This 2-conductor, 12 cm (4.5") cable has 24 AWG wires and a 2-pin female JST PH-type connector (2mm pitch) on one end. The other ends of the wires are...
$2.40 AUD, inc GST

Breakout for JST PH-Style Connector, 6-Pin Male Top-Entry, with SH

Brand: Pololu
This simple board serves as an adapter between a JST PH-style 6-pin, top-entry connector and breadboard-compatible 0.1"-pitch through holes. The PH...
$3.20 AUD, inc GST

JST RCY Connector - Male/Female Set

Brand: Sparkfun
This is a 2-pin JST RCY connector typically used for low-voltage applications running 10A or less. They are commonly found in RC vehicles. These come in a bag of 1 male plug, 1 female plug, plus pins to connect them both. The pins crimp to your cable and are inserted into the housing.
$1.30 AUD, inc GST

JST SH-Style Cable, 2-Pin, Single-Ended Female, 30cm

Brand: Pololu
This 2-conductor, 30 cm (12") cable has 28 AWG wires and a 2-pin female JST SH-type connector on one end. The other ends of the wires are unterminated;...
$1.70 AUD, inc GST

Breakout for JST SH-Style Connector, 6-Pin Male Top-Entry (3-Pack, Untested)

Brand: Pololu
This simple board serves as an adapter between a JST SH-style 6-pin male connector and breadboard-compatible 0.1"-pitch through holes. It works with our ...
$4.95 AUD, inc GST

4-pin JST SM Plug + Receptacle Cable Set

Brand: Adafruit
These 4-wire cables are 15cm long and come as a set, one side has a JST SM type connector plug on the end. The other side has a matching JST SM type receptacle connector...
$3.60 AUD, inc GST

JST PH 4-pin Vertical Connector (10-pack) - STEMMA

Brand: Adafruit
Designing boards with plug-n-play connectivity is a snap, with STEMMA connectors. Here's a pack of 10 of Adafruit's favorite 2mm pitch connector - the JST PH 4 pin. These...
$6.65 AUD, inc GST

Breakout for JST SH-Style Connector, 2-Pin Male Top-Entry (2-Pack)

Brand: Pololu
These simple boards serve as adapters between a JST SH-style 2-pin male connector and breadboard-compatible 0.1"-pitch through holes. They work with our...
$2.80 AUD, inc GST

JST SH-Style Cable, 2-Pin, Female-Female, 25cm

Brand: Pololu
This 2-conductor, 25 cm (10") cable has 28 AWG wires and 2-pin female JST SH-type connectors on both ends...
$2.60 AUD, inc GST

Breakout for JST SH-Style Connector, 3-Pin Male Side-Entry (2-Pack)

Brand: Pololu
These simple boards serve as adapters between a JST SH-style 3-pin male connector and breadboard-compatible 0.1"-pitch through holes. They work with our...
$2.95 AUD, inc GST

Breakout for JST PH-Style Connector, 4-Pin Male Top-Entry, with SH

Brand: Pololu
This simple board serves as an adapter between a JST PH-style 4-pin, top-entry connector and breadboard-compatible 0.1"-pitch through holes. The PH...
$2.80 AUD, inc GST

JST SH-Style Cable, 2-Pin, Female-Female, 10cm

Brand: Pololu
This 2-conductor, 10 cm (4") cable has 28 AWG wires and 2-pin female JST SH-type connectors on both ends...
$2.20 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.